Skip to content
Alternative Finance

Commercial loans · Brokers and borrowers

Business loan rate comparison

This business loan rate comparison tool takes five quotes expressed the way lenders actually express them, an APR, a simple interest charge over a term, a factor rate over a term, a monthly rate and a prime-plus-spread, and converts each to an effective annual percentage rate, then names the cheapest and dearest. It is for brokers and borrowers comparing offers from banks, online lenders and advance funders. Watch the simple-interest and factor quotes: because repayment starts immediately, their effective APR is far above the headline number.

Lowest effective APR
Quote E: 10.5%
Highest effective APR
Quote C: 54.7%

Simple interest and factor quotes understate cost because repayment starts immediately; monthly rates multiply by twelve; prime-plus quotes move with the Federal Reserve. Only APR is comparable across all of them.

Effective APR by quote
  • A14%
  • B21.5%
  • C54.7%
  • D18%
  • E10.5%
Quotes on a common APR footing
QuoteAs quotedEffective APR
A: APR quote14.00%14.00%
B: simple interest12.0% over 12 months21.5%
C: factor rate1.22 over 9 months54.7%
D: monthly rate1.50% per month18.0%
E: prime + spread10.50% variable10.50%

Formula

Quote A: effective APR = the APR as quoted.

Quote B: simple interest s over m months means total repayment of (1 + s) per dollar in m equal monthly installments; effective APR = 12 × the monthly rate that makes the present value of m payments of (1 + s) ÷ m equal 1.

Quote C: factor rate f over t months means repayment of f per dollar in daily installments over d = t ÷ 12 × 252 business days; effective APR = 252 × the daily rate that makes the present value of d payments of f ÷ d equal 1.

Quote D: monthly rate × 12 (nominal annualization, the convention lenders use when they quote per month).

Quote E: prime rate + spread (a variable rate; it is its own APR before fees and moves when prime moves).

Worked examples

Example 1: five quotes at the defaults

Use the defaults: Quote A APR 14 percent; Quote B simple interest 12 percent over 12 months; Quote C factor rate 1.22 over 9 months; Quote D monthly rate 1.5 percent; Quote E prime 7.5 percent plus a 3 percent spread. A stays at 14.00 percent. B: repaying $1.12 per dollar in 12 installments of $0.09333; the monthly rate that discounts twelve such payments to $1.00 is about 1.79 percent, so the effective APR is about 21.5 percent, not 12. C: 9 months is 9 ÷ 12 × 252 = 189 business days; repaying $1.22 in 189 daily installments of $0.006455; the daily rate that discounts them to $1.00 is about 0.217 percent, times 252 = 54.7 percent. D: 1.5 × 12 = 18.0 percent. E: 7.5 + 3 = 10.50 percent. Lowest effective APR: Quote E at 10.5 percent; highest: Quote C at 54.7 percent. The factor quote looked like 22 cents on the dollar and the simple quote like 12; on an annual footing they are 55 and 21.5 percent. The bar chart ranks them A 14, B 21.5, C 54.7, D 18, E 10.5.

Example 2: short terms make modest quotes expensive

Enter Quote A APR 11 percent; Quote B simple interest 8 percent over 6 months; Quote C factor 1.15 over 6 months; Quote D 2 percent a month; Quote E prime 7.5 plus 1.5. A: 11.00 percent. B: $1.08 repaid in 6 monthly installments of $0.18; the monthly IRR is about 2.24 percent, so the effective APR is 26.9 percent, more than three times the 8 percent headline, because the money is held for an average of only about three and a half months. C: 6 months is 126 business days; $1.15 repaid in 126 installments of $0.009127; daily IRR about 0.226 percent × 252 = 56.9 percent. D: 2 × 12 = 24.0 percent. E: 9.00 percent. Lowest: E at 9.0 percent; highest: C at 56.9 percent. A 1.15 factor over six months costs more per year than the 1.22 factor over nine months in example 1, because the same kind of charge is compressed into a shorter period.

Example 3: when a long simple-interest term is competitive

Enter Quote A APR 24 percent; Quote B simple interest 20 percent over 18 months; Quote C factor 1.35 over 12 months; Quote D 2.5 percent a month; Quote E prime 7.5 plus 6. A: 24.00 percent. B: $1.20 repaid in 18 installments of $0.06667; monthly IRR about 1.99 percent × 12 = 23.9 percent, slightly below quote A. C: 12 months is 252 business days; $1.35 repaid daily; daily IRR about 0.251 percent × 252 = 63.2 percent. D: 2.5 × 12 = 30.0 percent. E: 13.50 percent. Lowest: E at 13.5 percent; highest: C at 63.2 percent. Here the simple-interest loan is genuinely competitive with the APR quote because the term is long enough that the average outstanding balance is close to half the principal, which is roughly where simple interest and APR converge. Quote E is cheapest, but it floats: if prime rises two points, it becomes 15.5 percent and is still cheapest; the point is that its cost is not fixed.

Why five lenders quote five different ways

Banks and SBA lenders quote an annual interest rate, usually as a spread over prime, and the loan amortizes monthly, so the quote and the effective rate are the same thing before fees. Online term lenders often quote simple interest or a total interest charge: borrow $100,000, repay $112,000 over twelve months. Merchant cash advance and revenue-based funders quote a factor rate: 1.22 means repay $1.22 per dollar advanced, collected daily or weekly. Some lenders quote a monthly rate, which sounds small. Each convention is honest on its own terms and misleading next to the others, which is why a business loan rate comparison has to convert everything to one measure.

The measure is the annual percentage rate: the annualized periodic rate that makes the present value of the repayments equal the amount received. For consumer credit the federal Truth in Lending Act and Regulation Z require it to be disclosed; business-purpose credit is exempt under Regulation Z's business-credit exemption, which is why commercial lenders can quote however they like. Several states have closed part of that gap: California, through the DFPI, and New York, through the DFS, require commercial financing providers to disclose an APR or an equivalent on transactions below a dollar threshold, and other states have adopted their own formats. Wikipedia's APR entry covers the definitions and the nominal-versus-effective distinction.

How each conversion works, and what it leaves out

Conversion conventions used by the tool
QuoteAssumed repaymentAnnualizationWhat is not included
A: APRAs disclosedNoneFees unless the lender included them
B: simple interestEqual monthly installments over the termMonthly IRR × 12Origination fees; weekly or daily collection would raise it further
C: factor rateEqual business-day installments over the term, 252 days a yearDaily IRR × 252Origination fees; actual holdback that varies with sales
D: monthly rateInterest charged monthly on the balance× 12 (nominal)Compounding if interest is capitalized; fees
E: prime + spreadAmortizing at the current rateNoneFuture prime moves; fees; floors and caps

The simple-interest conversion is the one that surprises people. Twelve percent over twelve months sounds like a 12 percent rate, but the borrower never has the whole principal for the whole year: the first installment is due a month after funding, and by mid-year half the principal is repaid. The average balance outstanding is close to half the amount borrowed, so the interest charge is close to double the rate on the money actually used. The factor conversion is the same effect with daily collection and a shorter term, which is why factor quotes produce the highest effective APRs in every example. The factor rate vs APR guide and the factor rate to APR converter go deeper on that conversion and on what an advance's variable holdback does to it.

The monthly-rate conversion is nominal: 1.5 percent a month times twelve is 18 percent, which is the convention lenders and state disclosure rules use. The compounded equivalent, 1.015 to the twelfth power minus one, is about 19.6 percent; the tool uses the nominal figure so that quote D is on the same basis as quotes B and C, whose IRRs are also annualized by multiplication. None of the conversions include origination fees; add them with the business loan APR calculator once you have narrowed the field.

Reading the result: cheapest is not always best

The tool names the lowest and highest effective APR and charts all five. Use the ranking as the first cut, then ask three questions of the cheapest. Is it fixed or variable? Quote E is almost always the cheapest at the defaults, and it is the only one that floats; its cost is today's prime plus the spread, and prime moves with the Federal Reserve's policy rate, published alongside the prime rate in the H.15 release. Run the fixed vs variable loan calculator before taking it. Is the term right? A low APR on a ten-year loan for a six-month need costs more in dollars than a higher APR for six months; the loan term comparison calculator shows the trade. Can the borrower actually get it? The cheapest quote is usually the one with the hardest underwriting.

Sanity checks on the output: quote B's effective APR should be between 1.7 and 2 times the simple rate for terms of around a year and higher for shorter terms; quote C's should be roughly 2 to 3 times the factor premium (the part above 1.00) annualized, so a 1.22 factor over 9 months, a premium of 22 percent in three quarters of a year or about 29 percent a year simple, lands near 55 percent; quote D should be exactly twelve times the monthly rate. If B or C come out below their headline numbers you have entered a term in years rather than months.

What the audience does with the number

Brokers use the effective APR to place a borrower with the cheapest product the borrower qualifies for, and to defend a recommendation when a competing offer looks cheaper on its own convention. A broker who can show that a 1.15 factor over six months is a 57 percent effective rate, next to a 26.9 percent simple-interest loan and an 11 percent term loan, is giving the client the comparison the state disclosure laws were written to force. Lenders use the same conversions to position their pricing against competitors who quote differently, and increasingly to populate the APR field that state disclosure forms require. Borrowers use it to decide whether speed and ease are worth the premium, which they sometimes are: a 57 percent rate on $30,000 for six months is $4,500 of cost, and if that money prevents a $20,000 loss it is cheap.

The CFPB's Section 1071 rule requires covered lenders to report pricing data on small business credit applications, which over time will make effective rates by product and borrower type visible in a way they have never been. Until then the Federal Reserve's Small Business Credit Survey is the public source on which products small firms use and how satisfied they are with the terms. Both are context, not inputs.

Beyond the rate: fees, prepayment and collection method

  • Origination fees raise every quote's effective APR, and by more on short terms. A 3 percent fee on a 6-month loan adds roughly 6 points a year; on a 5-year loan, roughly 1 point.
  • Prepayment terms differ by convention. An amortizing loan prepaid early saves the remaining interest; a simple-interest loan or a factor-rate advance usually does not, because the full charge is fixed at signing. A low APR with no prepayment saving can cost more than a higher APR with one if the borrower repays early; see the prepayment savings calculator.
  • Collection frequency changes the effective rate. Daily or weekly collection on the same total charge raises the effective APR above the monthly figure the tool computes for quote B.
  • Variable holdbacks on advances mean the term is an estimate; the factor conversion assumes the estimated term is met.
  • Floors and caps on prime-based loans limit how far quote E can move; ask for both before comparing it with the fixed quotes.

The complete comparison is total dollars paid, timing and flexibility, not the rate alone. The how to compare funding offers guide and the loan comparison calculator put the dollar figures beside the rates; the business loan comparison calculator does it for two full offers with fees and terms.

Questions people ask

How do I compare a factor rate with an APR?

Convert the factor rate to an effective APR by finding the periodic rate that discounts the repayment stream to the amount advanced and annualizing it. A 1.22 factor repaid daily over nine months is about 55 percent APR; a 1.15 factor over six months is about 57 percent. The tool does this with 252 business days a year. Compare the result with the APR quote directly, then add fees to both.

Is 12 percent simple interest the same as 12 percent APR?

No. Simple interest over a term is a total charge: repay $1.12 per dollar over twelve months. Because repayment starts immediately and the average balance is about half the principal, the effective APR is roughly 21.5 percent. The shorter the term, the larger the gap: 8 percent simple over six months is about 27 percent APR.

What is a monthly interest rate of 1.5 percent as an APR?

The convention is nominal: 1.5 percent a month times twelve is 18 percent APR, which is what the tool reports for quote D. If interest is capitalized and compounds, the effective annual rate is higher, about 19.6 percent. Fees are not included in either figure.

Why is the prime plus spread quote usually the cheapest?

Because it is a bank-style variable rate priced for borrowers who qualify on credit, cash flow and collateral, and because it carries rate risk the borrower bears. Prime plus 3 at a 7.5 percent prime is 10.5 percent today; if prime rises two points the loan costs 12.5 percent. The Federal Reserve's H.15 release publishes the prime rate; the fixed vs variable calculator tests the risk.

Do business loans have to disclose an APR?

Not under federal law: Regulation Z exempts business-purpose credit from Truth in Lending disclosure. Several states, including California and New York, require commercial financing providers to disclose an APR or equivalent on transactions below a dollar threshold, with their own formats. Outside those states the lender can quote any convention, and this tool is how a borrower puts the quotes on one footing.

Sources and further reading

Site calculators on the same topic

Related tools and guides

More commercial loans

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Turn the estimate into real offers

One request, several funding partners, side-by-side payback. Nothing is binding until you accept an offer.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

Check business funding offers

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.