Skip to content
Alternative Finance

MCA tools · Business owners and brokers

Factor rate to APR calculator

This factor rate to APR calculator converts the multiplier on an advance into two annual rates: a simple annual cost that just spreads the factor over the term, and an effective APR that charges for the declining balance the way a loan disclosure would. Owners use it to compare an advance against a term loan or line of credit; brokers use it to see the APR a state disclosure form will show. The one thing to watch is the term: the same 1.25 factor is a 53 percent APR over twelve months and a 209 percent APR over three.

Effective APR
105.4%
Simple annual cost
56.0%
Cost per dollar advanced
$0.28
Remittances in the term
126

Simple annual cost = (factor − 1 + fees) ÷ years. The effective APR is higher because you repay in small instalments from day one rather than all at the end.

Same 1.25 factor at different terms
TermSimple annual costEffective APR
3 months112%209%
4 months84%158%
6 months56%105%
8 months42%79%
10 months34%63%
12 months28%53%
18 months19%35%

Formula

Cost per dollar advanced = Factor rate − 1 + Fees as share of advance (as a decimal).

Simple annual cost = Cost per dollar advanced ÷ (Payback period in months ÷ 12).

Remittances in the term = Payback period ÷ 12 × 252 (daily) or × 52 (weekly), rounded.

Effective APR: per dollar advanced you receive 1 − fees today and pay Factor rate ÷ remittances each period; the APR is the per-period rate that equates the two, multiplied by 252 or 52. This is the nominal annualization used in lending disclosures, not a compounded figure.

Worked examples

Example 1: the default inputs, 1.25 over six months with 3 percent fees, daily

Factor rate 1.25, payback period 6 months, fees 3 percent of the advance, daily remittances. Cost per dollar advanced = 1.25 − 1 + 0.03 = $0.28. Simple annual cost = 0.28 ÷ (6 ÷ 12) = 0.56, or 56.0 percent. Remittances in the term = 6 ÷ 12 × 252 = 126. For the effective APR, picture a $1 advance: you receive 1 − 0.03 = $0.97 today and repay 1.25 ÷ 126 = $0.009921 every business day for 126 days. The daily rate at which 126 payments of $0.009921 are worth $0.97 is about 0.418 percent, and 0.418 percent × 252 = 105.4 percent effective APR. The table then holds the factor and fee fixed and varies the term: 3 months gives a 112 percent simple cost and 209 percent APR; 4 months, 84 percent and 158 percent; 6 months, 56 percent and 105 percent; 8 months, 42 percent and 79 percent; 10 months, 34 percent and 63 percent; 12 months, 28 percent and 53 percent; 18 months, 19 percent and 35 percent.

Example 2: a high factor over a full year, weekly, with no fees

Factor rate 1.38, payback period 12 months, fees 0 percent, weekly remittances. Cost per dollar advanced = 1.38 − 1 + 0 = $0.38. Simple annual cost = 0.38 ÷ (12 ÷ 12) = 38.0 percent. Remittances in the term = 12 ÷ 12 × 52 = 52. Per dollar advanced you receive $1.00 and repay 1.38 ÷ 52 = $0.026538 a week for 52 weeks. The weekly rate that equates the two is about 1.29 percent, and 1.29 percent × 52 = 67.3 percent effective APR. So a 1.38 factor over a year is a cheaper annual rate than the 1.25 factor over six months in Example 1, even though it costs more per dollar; it just costs it more slowly. If the same 1.38 factor were compressed into 6 months the table row shows a 133 percent APR, and at 3 months, 258 percent.

Example 3: a low factor on a very short term with heavy fees

Factor rate 1.18, payback period 4 months, fees 5 percent, daily remittances. Cost per dollar advanced = 1.18 − 1 + 0.05 = $0.23. Simple annual cost = 0.23 ÷ (4 ÷ 12) = 0.69, or 69.0 percent. Remittances = 4 ÷ 12 × 252 = 84. Per dollar advanced you receive $0.95 and repay 1.18 ÷ 84 = $0.014048 a day for 84 days; the daily rate that equates the two is about 0.531 percent, and × 252 = 133.8 percent effective APR. This is the offer that looks cheapest on a pricing sheet ("only 18 cents on the dollar") and is the most expensive of the three by APR. A fee of 5 percent on a four-month advance is itself equivalent to a 15 percent annual charge before any factor is applied.

Two ways to annualize a factor rate

The simple annual cost answers the question "what would this cost per year if I kept all the money for the whole term?" It is the factor cost plus fees divided by the term in years. It is the figure most pricing comparisons use informally, and it is always too low, because you do not keep all the money for the whole term; you hand some back every business day.

The effective APR answers "what annual rate would a loan have to charge to produce this same stream of payments?" It is the internal rate of return of the cash flows, per period, multiplied by the number of periods in a year. This is the same construction Regulation Z uses for consumer credit under 12 CFR 1026.22, and it is what California's and New York's commercial financing disclosure rules ask providers to put on an advance disclosure.

The gap between the two widens as the term shortens. On the default 1.25 factor, the simple cost and the APR differ by about 49 points at six months and by 97 points at three. Whichever one you report, say which it is; a broker quoting "56 percent" and a disclosure form showing "105 percent" are describing the same deal.

Effective APR
92.2%
Total payback
$65,000
Cost of capital
$16,500
Net funds received
$48,500
Daily payment (168 payments)
$386.90
Simple annual cost (what brokers quote)
51.0%
APR is the internal rate of return of receiving the net funds today and making the scheduled payments, annualized by payments per year (252 business days or 52 weeks). It is the figure state disclosure laws in California and New York require. Simple annual cost ignores the fact that you repay daily, which is why it understates the real rate.

Full version with instructions: mca factor rate apr calculator.

Why the term dominates the APR

A factor is a fixed cost. Spread over a long term it is a low annual rate; compressed into a short term it is a high one. Halving the term roughly doubles the simple annual cost and more than doubles the effective APR, because the average outstanding balance also shrinks. The table under the tool is the clearest way to see this: read down the APR column for your factor and find the term where the rate becomes comparable with what a loan would charge.

Effective APR for a 1.25 factor with 3 percent fees, by term (daily remittance)
  • 3 months209%
  • 4 months158%
  • 6 months105%
  • 8 months79%
  • 12 months53%
  • 18 months35%

Same dollars, different speed. Values from the worked example above.

For owners this means a longer term at the same factor is strictly cheaper in annual terms and lighter on cash flow, at the price of a longer period of debits. For brokers it means a funder's short-term, low-factor product can be the wrong recommendation for a merchant who will compare offers on APR, which is exactly what a disclosure form in California or New York invites them to do.

Which states require an APR on an advance

Business-purpose financing is exempt from the federal Truth in Lending Act, so the only APR rules come from states. California requires providers to disclose an APR, calculated from projected sales where the remittance is a percentage of receipts, on commercial financing of $500,000 or less; the Department of Financial Protection and Innovation publishes the regulations and the required formats. New York requires an APR on commercial financing up to $2.5 million under rules from the Department of Financial Services.

Utah, Virginia, Georgia, Florida, Connecticut and Kansas have disclosure statutes that require the total dollar cost, total repayment amount, payment amounts and frequency, and prepayment terms, but generally do not require an APR; several of them (Utah, Virginia, Connecticut) add a registration requirement for providers, and Connecticut also registers brokers. Georgia's statute is published by the Georgia General Assembly and Florida's by the Florida Senate; Kansas's law sits with the Kansas Legislature.

Using the APR to compare an advance with a loan

An APR is only useful side by side with another APR. Run the same amount and term through the business loan APR calculator, the business line of credit calculator and, if you have receivables, the invoice factoring calculator. Bank and SBA loans price off benchmarks you can check at the Federal Reserve's H.15 release; advance APRs are set by risk, not by benchmarks, and the gap between the two is the price of speed and of not qualifying elsewhere.

How to read an advance APR against loan products (typical ranges, illustrative)
ProductHow it is pricedWhat a high advance APR tells you
SBA 7(a) loanBase rate plus a capped spread, set by SBA rulesIf you can wait for approval, the saving is large; see the SBA program page
Bank term loanFixed or prime-based rate on a declining balanceCollateral and two years of financials usually required
Online term loanRate or factor, often shorter termSometimes cheaper than an advance at the same term; compare on APR
Line of creditInterest only on drawn balance plus feesCheapest for recurring short gaps; needs a credit line in place before the gap
Merchant cash advanceFactor rate, fixed cost, speedAPR is the price of same-week funding and weak-credit tolerance

The SBA 7(a) program and Lender Match are the first stop for a business that has time. The comparison of a merchant cash advance with a business loan sets out the qualifying differences.

Limits of an APR on a sales-based advance

The converter assumes a fixed schedule: the same remittance every period for a known number of periods. A true split-funding advance, where the funder takes a percentage of each day's card settlements, has no fixed term. Its APR depends on how fast you sell, which is why California's rules call the disclosed figure an estimated APR and base it on a projection of sales. If your sales come in faster than projected, the real APR is higher; slower, and it is lower.

A reconciliation clause has the same effect on a fixed-debit advance. If you invoke it and the remittance is reset to a percentage of actual receipts, the term stretches and the APR falls, while the dollar cost (factor − 1 plus fees) does not move. The APR is therefore the right tool for comparing the price of money across products and the wrong tool for judging whether the daily debit is survivable; the MCA daily payment calculator answers that second question.

Finally, the APR here is nominal (per-period rate × periods per year), which is the lending convention. A compounded effective annual rate would be higher still. If an academic source or a spreadsheet function gives you a larger number for the same deal, that is the likely reason.

Input mistakes that distort the conversion

  • Entering fees in dollars in the percent field. The field wants the fee as a share of the advance; a $1,500 fee on $50,000 is 3 percent.
  • Using the net funds figure to compute the factor and then entering fees again. The factor must be payback ÷ gross advance, with fees entered separately, or the fee is counted twice.
  • Entering the term in business days or weeks. The field is in months; an advance with 126 daily remittances is six months.
  • Comparing the simple annual cost with a bank's APR. Only the effective APR line is comparable with a loan APR.
  • Ignoring frequency. A weekly schedule has fewer, larger payments and a slightly lower APR than a daily one at the same factor and term, because the first week's cash stays with you longer.

A quick sanity check: the effective APR should always exceed the simple annual cost, and the gap should grow as the term shortens. If the APR is lower, the inputs are inconsistent. For a full-deal view with dollar outputs, the merchant cash advance calculator takes the actual advance amount and fees.

Related guides

Questions people ask

How do you convert a factor rate to an APR?

Subtract 1 from the factor, add any fees as a share of the advance, and divide by the term in years for a simple annual cost. For a true APR, find the per-period rate at which the stream of equal remittances is worth the net funds today, then multiply by the number of periods in a year (252 business days or 52 weeks). The tool does both.

What APR is a 1.25 factor rate?

It depends entirely on the term. With daily remittances and 3 percent fees, 1.25 is about a 53 percent effective APR over twelve months, 105 percent over six and 209 percent over three. Without fees each figure is a little lower. The factor alone cannot be converted; the term must be known.

Why is the APR so much higher than the simple annual cost?

Because you repay from the first business day, the average amount you actually have in hand over the term is roughly half the advance. The fixed factor cost is therefore being charged on a much smaller average balance than the simple calculation assumes, which pushes the annual rate up.

Do merchant cash advance companies have to show an APR?

In California and New York, yes, on commercial financing below the statutory thresholds; the figure for a sales-based advance is an estimate built on projected sales. Utah, Virginia, Georgia, Florida, Connecticut and Kansas require total cost and repayment disclosures but generally not an APR. There is no federal APR requirement for business financing.

Is a lower factor rate always a cheaper deal?

No. A 1.18 factor over four months with 5 percent fees is about a 134 percent APR; a 1.38 factor over twelve months with no fees is about 67 percent. The lower factor costs less in dollars per dollar advanced but far more per year. Decide first whether you are comparing dollars or annual rates, then compare like with like.

Sources and further reading

Site calculators on the same topic

Related tools and guides

More mca tools

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Turn the estimate into real offers

One request, several funding partners, side-by-side payback. Nothing is binding until you accept an offer.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

Check merchant cash advance offers

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.