Skip to content
Alternative Finance

MCA tools · Business owners and brokers

MCA factor rate calculator

The MCA factor rate calculator works backwards from the numbers you can actually see on an offer or a contract. Give it the advance and the total payback, or the advance plus the remittance and how many remittances there are, and it returns the factor rate, the dollar cost, the cost as a share of the advance and the price of every hundredth of a point. Owners use it to check a quoted factor against the paperwork; brokers use it to see what a small move in factor is worth on a given deal. Watch for the second mode: the remittance times the count is the real payback, and it often differs from the figure that was quoted.

Factor rate
1.3
Total payback
$52,000
Cost of capital
$12,000
Cost as share of advance
30.0%
Each 0.01 of factor costs
$400

Factor rate = payback ÷ advance. It is a multiplier, not an interest rate: 1.30 means you repay 30 percent more than you received, regardless of how long it takes.

What each factor rate means on a $40,000 advance
FactorPaybackCost
1.15$46,000$6,000
1.20$48,000$8,000
1.25$50,000$10,000
1.30$52,000$12,000
1.35$54,000$14,000
1.40$56,000$16,000
1.45$58,000$18,000
1.50$60,000$20,000

Your funding estimate

$40,000

Estimated amount from your inputs. An example calculation, not an offer from any lender.

Compare funding options

Formula

Total payback = Total payback (if known), or Remittance amount × Number of remittances when you choose the "advance, remittance and number of payments" mode.

Factor rate = Total payback ÷ Advance amount.

Cost of capital = Total payback − Advance amount. Cost as share of advance = Factor rate − 1.

Each 0.01 of factor costs = Advance amount × 0.01. The table applies factors from 1.15 to 1.50 to your advance so you can see the whole pricing ladder.

Worked examples

Example 1: the default inputs, $40,000 advance with $52,000 payback

Mode: advance and total payback. Advance amount $40,000, total payback $52,000. Factor rate = 52,000 ÷ 40,000 = 1.300. Cost of capital = 52,000 − 40,000 = $12,000. Cost as share of advance = 1.300 − 1 = 30.0 percent. Each 0.01 of factor costs = 40,000 × 0.01 = $400. The table then prices the ladder: at 1.15 the payback would be 40,000 × 1.15 = $46,000 and the cost $6,000; at 1.20, $48,000 and $8,000; at 1.25, $50,000 and $10,000; at 1.30, $52,000 and $12,000; at 1.35, $54,000 and $14,000; at 1.40, $56,000 and $16,000; at 1.45, $58,000 and $18,000; at 1.50, $60,000 and $20,000. Every step of 0.05 is worth $2,000 on this advance, which is the figure to keep in mind when a broker says the funder "might move a bit".

Example 2: the same advance, read from the remittance schedule

Mode: advance, remittance and number of payments. Advance amount $40,000, remittance amount $310, number of remittances 168 (eight months of business days). Total payback = 310 × 168 = $52,080. Factor rate = 52,080 ÷ 40,000 = 1.302. Cost of capital = 52,080 − 40,000 = $12,080. Cost as share of advance = 30.2 percent. The quoted factor was 1.30, but the schedule repays $80 more than 1.30 implies, because the funder rounded the daily figure up from $309.52 to $310. On a small advance that is noise; on a schedule of 252 remittances rounded up by a few dollars it can add several hundred dollars, so always run the schedule mode against the contract's stated daily amount and count.

Example 3: a larger deal where only the debit is known

Mode: advance, remittance and number of payments. Advance amount $85,000, remittance amount $842, number of remittances 132. Total payback = 842 × 132 = $111,144. Factor rate = 111,144 ÷ 85,000 = 1.308 (the tool rounds to three decimals). Cost of capital = 111,144 − 85,000 = $26,144. Cost as share of advance = 30.8 percent. Each 0.01 of factor costs = 85,000 × 0.01 = $850. The ladder table shows that at 1.25 the payback would be $106,250 and the cost $21,250, so negotiating this deal down by roughly 0.06 of factor would save about $4,900. With 132 remittances the term is 132 ÷ 21 ≈ 6.3 months; the merchant cash advance calculator converts that into an APR.

Factor rate versus interest rate

A factor rate is a multiplier applied once to the advance. It has no time dimension: 1.30 means $1.30 back for every $1.00 advanced, whether the agreement runs for 90 business days or 300. An interest rate is a price per unit of time applied to the outstanding balance, so it falls in dollars as you repay and rises in dollars as the term lengthens. The two cannot be compared by looking at the number alone; annual percentage rate is the bridge, and the factor rate to APR converter builds it.

Funders quote factors to two decimals, and occasionally to three. Brokers often describe them as "a 1.3" or "thirty cents on the dollar". Some offers are expressed instead as a "buy rate" plus points: a buy rate of 1.22 with eight points of commission is a 1.30 sell rate to the merchant. The buy rate versus sell rate calculator splits the two, and the guide on how brokers get paid explains where the points go.

Reverse-engineering the factor from a remittance schedule

Many merchants never see the factor written down. The contract states a purchase price (the advance), a purchased amount (the payback) and a specified daily or weekly amount, and some only state the daily amount and a term. Mode two of the tool exists for that case: remittance × number of remittances is the payback, and payback ÷ advance is the factor.

  1. Find the specified daily or weekly amount on the agreement or the ACH authorization.
  2. Count the remittances: either the stated number, or the term in months × 21 for daily debits and × 52 ÷ 12 for weekly ones.
  3. Enter both with the purchase price. If the resulting factor is higher than the one quoted, ask the funder to reconcile the schedule to the purchased amount in writing.
  4. Check the last payment. Some schedules make the final debit smaller so the total lands exactly on the purchased amount; others overshoot and refund later. The contract should say which.

A difference of a few dollars is rounding. A difference of several hundred dollars means something else is in the schedule: a fee being collected through the daily debit, an interest-like charge for a delayed start, or a renewal where the unpaid balance of the old advance has been rolled into the new payback. The MCA payoff calculator shows what that rolled balance should have been.

What moves the factor rate

Funders price factor from the risk they see in bank statements and the position they will hold. Commonly cited drivers, in roughly descending order of weight, are the number of existing advances (each open position raises the factor and shortens the term), the volume and consistency of monthly deposits, the count of NSF and negative-balance days, time in business, the owner's personal credit, and the industry. A first-position advance to a merchant with clean statements commonly prices toward the bottom of the 1.15 to 1.49 range that the calculator's ladder covers; a third position prices toward the top or is declined.

The term interacts with the factor. A funder that offers 1.30 over eight months may offer 1.24 over four months for the same advance, because the money comes back faster and the risk window is shorter. Lower factor, higher daily burden. The MCA daily payment calculator tells you whether the shorter term is survivable before you take the discount.

Ladder for a $40,000 advance (the tool rebuilds this for your amount)
FactorPaybackCostCost per 0.05 step
1.15$46,000$6,000—
1.20$48,000$8,000$2,000
1.25$50,000$10,000$2,000
1.30$52,000$12,000$2,000
1.35$54,000$14,000$2,000
1.40$56,000$16,000$2,000
1.45$58,000$18,000$2,000
1.50$60,000$20,000$2,000

Negotiating with the number in hand

The "each 0.01 of factor costs" output is the negotiation unit. On a $40,000 advance every hundredth is $400; on $85,000 it is $850. A broker's commission is typically a share of the advance expressed in points over the buy rate, so asking for 0.03 off the factor is asking the broker to give up a known number of dollars, and the broker knows whether that is one point of commission or three.

  • Ask for the buy rate and the points separately. A funder's own pricing sheet caps the sell rate; a broker cannot go above it and may go below it.
  • Trade term for factor only if the daily debit stays inside what your deposits can carry; a factor cut that triggers NSFs costs more in returned-payment fees than it saves.
  • Ask whether fees can be reduced or waived before asking for the factor to move; funders protect the factor and are more flexible on fees.
  • Ask about a prepayment discount schedule. Some contracts reduce the purchased amount if you settle within a set number of days; that effectively lowers the factor for a fast payoff.
  • Get the final factor, purchased amount, specified daily amount and remittance count in one written document and re-run this calculator against it.

Brokers using this page in reverse can see what a merchant will see: if the merchant runs the signed contract through the schedule mode and finds 1.302 instead of the quoted 1.30, the relationship suffers over $80. Quote from the schedule, not from the pricing sheet.

Reading the result and avoiding input mistakes

A factor above 1.40 is shown in amber. That is not a signal that the deal is wrong; it is a signal that the position, term or risk profile is pushing the price high, and that a cheaper alternative should be priced before signing. A factor below about 1.10 on a short-term advance is unusual and usually indicates a mis-entered payback figure or a renewal where part of the payback is already paid.

  • Advance means purchase price, the amount the funder is paying, before fees. If you only know net funds after fees, the factor you compute will be too high; add the fees back first.
  • In schedule mode, make sure the remittance and the count use the same frequency. A weekly amount with a daily count produces a nonsense factor.
  • If a renewal rolled an old balance into the new advance, enter the gross new purchase price, not the cash you received, or the factor will again come out too high.
  • The cost share output (factor − 1) is a share of the advance, not of net funds. On a $40,000 advance with $1,600 of fees the true cost on money received is 12,000 ÷ 38,400 = 31.3 percent rather than 30 percent.

Disclosure law, taxes and the factor rate

Where a state commercial financing disclosure law applies, the cost figures this tool produces must appear on the funder's disclosure form. California's regime, run by the Department of Financial Protection and Innovation, requires the total dollar cost and an estimated APR for sales-based financing; New York's Department of Financial Services rules do the same. Georgia's and Florida's statutes require the total dollar cost, total repayment and a payment description; Kansas, Utah, Virginia and Connecticut follow the same pattern with registration requirements in the last three. A cost-of-capital line on a disclosure that does not equal payback minus advance is a question to ask before signing.

The factor charge is generally treated as a business expense for tax purposes, but how it is characterized (interest, a discount on sold receivables, or a financing fee) depends on the contract and on the accountant's reading of the sale-of-receivables structure. The IRS small-business pages cover deductible business expenses; ask a tax professional how to book an advance, because the timing of the deduction differs between a true sale and a loan.

Lenders and funders also have reporting duties coming under Section 1071 of the Dodd-Frank Act, which requires covered financial institutions to collect and report data on small-business credit applications, including pricing. Merchant cash advances are among the products covered. That reporting is to the regulator, not to you, but it is a further reason for funders to document the factor and fees precisely.

Related guides

Questions people ask

How do you calculate an MCA factor rate?

Divide the total payback by the advance. A $40,000 advance with a $52,000 payback has a factor of 52,000 ÷ 40,000 = 1.30. If you only know the daily remittance and the number of payments, multiply them to get the payback first; $310 × 168 = $52,080 gives a factor of 1.302.

What is a good factor rate for a merchant cash advance?

Commonly the range runs from about 1.15 to 1.49. Anything near the bottom is reserved for first-position advances to businesses with strong, steady deposits. The factor alone does not tell you the cost of time; a 1.20 over three months can carry a higher APR than a 1.35 over twelve.

Is the factor rate the same as the buy rate?

No. The buy rate is the funder's price before broker commission; the sell rate, which is the factor the merchant pays, is the buy rate plus the broker's points. A 1.22 buy rate with eight points is a 1.30 factor. Merchants only see the sell rate unless they ask.

Does the factor rate change if I pay early?

Not by itself. The purchased amount is fixed at signing. Some agreements include a prepayment discount that reduces the purchased amount if you settle within a stated window; that lowers the effective factor only for the payoff case. Otherwise, paying early changes the APR but not the dollar cost.

What does each 0.01 of factor cost?

The advance multiplied by 0.01. On a $40,000 advance that is $400, on $85,000 it is $850. Use it in negotiation: asking for 0.05 off a $40,000 deal is asking for a $2,000 price cut, which is usually a known share of the broker's commission.

Sources and further reading

Site calculators on the same topic

Related tools and guides

More mca tools

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Turn the estimate into real offers

One request, several funding partners, side-by-side payback. Nothing is binding until you accept an offer.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

Check merchant cash advance offers

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.