12 free tools. Factor rates, daily and weekly payments, APR conversion, payoff balances, consolidation and offer comparison for merchant cash advances.
Merchant cash advances are priced with factor rates and repaid with daily or weekly debits, which makes them hard to compare with anything else. These tools translate an advance into payback, daily burden, effective APR and cost per dollar, and model payoff, consolidation and renewal decisions.
If you are a business owner with an offer in hand, start with the MCA calculator and the factor-rate-to-APR converter. If you are juggling several positions, the consolidation and payoff tools show what each option costs.
An advance is quoted in a vocabulary designed to be hard to compare: a factor instead of a rate, a daily debit instead of a monthly payment, a payback instead of a balance. The twelve tools here translate each of those into the terms every other product uses, and then handle the decisions that only advances raise: payoff, consolidation, renewal and capacity.
How much can my business support? The funding capacity estimator applies the multiples of monthly deposits that funders commonly use, adjusted for existing positions.
Which of these offers is best? The offer comparison tool lines up three advances on net funds, cost, APR and daily burden.
A merchant cash advance is a purchase: the funder buys a fixed dollar amount of your future receivables, the payback, for a smaller amount today, the advance. The ratio is the factor. Collection is either a holdback of a percentage of card settlements or, more commonly now, a fixed daily or weekly ACH debit sized to approximate the agreed share of receipts, with a reconciliation clause that lets you ask for the debit to be adjusted to actual receipts if sales fall. The fixed-dollar payback, collected over months, is what makes the annualized cost high, and the reconciliation right is what keeps the contract a purchase rather than a loan.
The factor is set by the funder's risk tier and by position. A first-position advance to a business with clean statements prices lowest; each existing position raises the factor because the new funder is behind the earlier ones on the same deposits. Funders make money on the spread between the factor and their own losses and cost of funds, and on renewals: a new advance issued before the old is repaid, with the old balance deducted from the new proceeds, so the merchant pays a factor on money that goes straight back to the funder. The stacking and renewals guide walks through the arithmetic.
The rules are thinner than for loans but not absent. Federal Truth in Lending does not apply, so no APR is required nationally. Section 1071 of the Dodd-Frank Act, implemented by the Consumer Financial Protection Bureau's small business lending rule, treats merchant cash advances as covered credit for data collection. The Federal Trade Commission has brought enforcement actions against advance providers over deceptive marketing and collection practices under the FTC Act. And a growing group of states requires disclosures or registration: California and New York require an APR on the disclosure, while states such as Virginia and Utah require providers of sales-based financing to register and disclose the total cost. The state pages list which rule reaches you.
A workflow for an owner holding an advance offer
1
Translate the quote
Enter the amount, factor, fees and term into the merchant cash advance calculator. You now have the payback, the net funds, the dollar cost and the debit. Refuse to proceed until each is in writing from the funder and matches.
2
Annualize it
Put the same figures into the factor rate to APR converter. The APR is the only figure that makes a ten-month advance comparable with a loan; the guide to factor rates and APR explains why it is so much higher than the factor suggests.
3
Measure the daily bite
The daily ACH payment calculator shows the debit as a share of your average daily deposits. A share that would exceed your margin in a slow month is a default waiting to happen.
4
Check capacity before accepting a larger amount
Funders often offer more than you asked for. The funding capacity estimator applies common deposit multiples and subtracts existing positions; take less than the ceiling, not more.
5
Compare offers on one page
With two or three written offers, the offer comparison tool ranks them on net funds, APR and daily burden. The cheapest is rarely the one with the lowest factor once fees and term are included.
6
Plan the exit on day one
Ask whether the contract has an early payoff discount schedule and enter it into the early payoff discount calculator. Without a discount, paying early saves nothing; with one, the calculator shows the window in which refinancing into a cheaper product makes sense.
Worked example: payoff, discount and the renewal trap
A salon in Nevada took a $40,000 advance at a 1.32 factor, payback $52,800, collected by 210 daily debits of $251.43. After 120 debits the owner wants to know what she owes and whether a renewal offer makes sense.
Collected so far: 120 × $251.43 ≈ $30,172. Remaining payback: 90 × $251.43 ≈ $22,629. This is the payoff figure, not the unpaid share of the $40,000; the full factor is owed whenever you pay.
With a 10% early payoff discount on the remaining payback: $22,629 × 10% ≈ $2,263 saved; payoff ≈ $20,366. A loan at a far lower APR that funds $20,366 to retire the advance is now worth considering; without the discount, retiring it early buys only the end of the daily debit.
The renewal offer: a new $50,000 advance at 1.30 (payback $65,000), with the $22,629 balance deducted. Net new money ≈ $50,000 − $22,629 − fees ≈ $27,371 before fees. The salon now owes $65,000 to receive $27,371 of fresh cash, and has paid a 1.30 factor on $22,629 it had already paid a 1.32 factor on.
The honest comparison: cost of the renewal's fresh money ≈ ($65,000 − $22,629 − $27,371) ÷ $27,371, which is the $15,000 markup against $27,371 received, roughly a 1.55 effective factor on the new cash. The consolidation calculator performs this calculation for any combination of positions.
Common mistakes
Reading the factor as an interest rate. A 1.32 factor is a 32% markup collected in ten months, not a 32% annual rate. Convert it.
Forgetting the fees. Origination and ACH fees come out of the advance before it arrives; the converter prices against net funds, and so should you.
Accepting the maximum offered. Funders size offers to the ceiling of deposit multiples; the daily debit scales with it and so does the risk.
Not using reconciliation. The clause requires a written request; a silent shortfall is a default. Ask the funder for its reconciliation procedure before signing and keep the form.
Taking a second position to cover the first. Each new position prices higher and shortens the runway; the reverse consolidation calculator shows how a structure sold as relief usually extends the total payback.
Assuming a sale is unregulated. State disclosure and registration laws reach sales-based financing specifically, and the FTC Act reaches any deceptive practice. Check your state page and keep every document.
Questions people ask
Why does paying an advance off early not save money?
Because the payback was fixed at signing as a purchase price for your receivables, not as a balance accruing interest. Paying early delivers the same dollars sooner and raises the funder's annualized return. Only a contractual early payoff discount changes that; if your contract has one, the early payoff discount calculator shows what it is worth and when.
What is a reasonable factor?
Factors commonly seen range from the low 1.1s for strong first-position merchants on short terms to the high 1.4s for weaker or stacked files, and the same factor can be cheap or expensive depending on the term. Judge an offer by its APR and its daily burden, not by the factor alone; a 1.20 over four months can cost more per year than a 1.35 over fourteen.
Does a merchant cash advance report to credit bureaus?
Usually not as a tradeline, which is why it neither builds nor directly damages business credit. A default can surface as a UCC lien, a judgment or a collection, all of which later lenders find. Some funders report; ask before signing.
Is reverse consolidation a loan?
It is usually structured as another advance that deposits weekly amounts sized to cover your existing daily debits while taking a smaller daily debit of its own over a longer term. It can lower the weekly outflow in the short run, and it adds a new payback on top of the old ones. Run it through the reverse consolidation calculator before agreeing; the total payback across all positions is the figure that matters.
Tell us a little about the business and we route the request to partners that fund your industry, size and credit profile. You compare the total payback and decide. Nothing is binding until you sign.
Soft inquiry to request offers; a hard pull only if you proceed with a funder.
Decisions in as little as 24 hours for many products; funding often within days.
Use our calculators to check the true cost before you accept anything.
See what you may qualify for
Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.