Skip to content
Alternative Finance

Commercial loans · Brokers and borrowers

Commercial loan calculator

This commercial loan calculator computes the monthly payment on a loan whose amortization period is longer than its term, the interest-only payment for an initial period, the balloon balance due at maturity, the interest paid through maturity, the origination fee and the annual debt service. It is for brokers and borrowers structuring commercial real estate, acquisition and large equipment loans. The thing to watch is the balloon: on a 25-year amortization with a 10-year term, most of the principal is still owed when the loan comes due.

Amortizing monthly payment
$7,553.29
Interest-only payment
$6,458.33
Balloon due at maturity
$802,452
Interest paid through maturity
$708,847
Origination fee
$10,000
Annual debt service
$90,639

Commercial loans commonly amortize over 20 to 25 years but mature in 5 to 10, leaving a balloon that must be refinanced or paid. Plan the exit before you sign.

Your funding estimate

$1,000,000

Estimated amount from your inputs, about $7,553 per month over 10 years. An example calculation, not an offer from any lender.

Compare funding options

Formula

Amortizing monthly payment = Loan amount × r ÷ (1 − (1 + r)^−N), where r = Interest rate ÷ 12 and N = Amortization (years) × 12

Interest-only payment = Loan amount × Interest rate ÷ 12, paid for the number of Interest-only months at the start (capped at the term)

Balloon due at maturity = Loan amount × (1 + r)^k − Payment × ((1 + r)^k − 1) ÷ r, where k = Term to maturity × 12 − Interest-only months (the number of amortizing payments made)

Interest paid through maturity = Interest-only payment × IO months + Amortizing payment × k − (Loan amount − Balloon)

Origination fee = Loan amount × Origination fee percent; Annual debt service = Amortizing monthly payment × 12

Worked examples

Example 1: $1,000,000 at 7.75 percent, 25-year amortization, 10-year term

Use the defaults: Loan amount $1,000,000, Interest rate 7.75 percent, Amortization 25 years, Term to maturity 10 years, Interest-only months 0, Origination fee 1 percent. Monthly rate r = 0.0775 ÷ 12 = 0.0064583. N = 25 × 12 = 300 payments. (1 + r)^−300 = 1.0064583^−300 ≈ 0.1450, so 1 − 0.1450 = 0.8550. Payment = $1,000,000 × 0.0064583 ÷ 0.8550 = $7,553.29. Interest-only payment = $1,000,000 × 0.0775 ÷ 12 = $6,458.33 (shown for reference even though no IO months are used). Amortizing payments made before maturity k = 120. Balloon = $1,000,000 × 1.0064583^120 − $7,553.29 × (1.0064583^120 − 1) ÷ 0.0064583 = $802,452. Principal repaid in ten years = $1,000,000 − $802,452 = $197,548. Interest through maturity = $7,553.29 × 120 − $197,548 = $906,395 − $197,548 = $708,847. Origination fee = $10,000. Annual debt service = $7,553.29 × 12 = $90,639. After ten years of payments totalling $906,395, more than 80 percent of the principal is still owed.

Example 2: $750,000 at 8.5 percent with 12 interest-only months, 20-year amortization, 5-year term

Enter Loan amount $750,000, Interest rate 8.5 percent, Amortization 20 years, Term 5 years, Interest-only months 12, Origination fee 1.5 percent. r = 0.085 ÷ 12 = 0.0070833; N = 240. Amortizing payment = $750,000 × 0.0070833 ÷ (1 − 1.0070833^−240) = $6,508.67. Interest-only payment = $750,000 × 0.085 ÷ 12 = $5,312.50 for the first 12 months, during which the balance does not fall. Amortizing payments made k = 60 − 12 = 48. Balloon after 48 amortizing payments = $681,900. Principal repaid = $750,000 − $681,900 = $68,100. Interest = $5,312.50 × 12 + $6,508.67 × 48 − $68,100 = $63,750 + $312,416 − $68,100 = $308,066. Origination fee = $750,000 × 0.015 = $11,250. Annual debt service = $78,104. The IO year lowers the first-year outlay by about $14,350 but leaves the borrower with a larger balloon than a fully amortizing structure would, because the schedule only ran for 48 of the 60 months.

Example 3: $2,000,000 at 7 percent, fully amortizing over 25 years

Enter Loan amount $2,000,000, Interest rate 7 percent, Amortization 25 years, Term 25 years, Interest-only months 0, Origination fee 0.5 percent. r = 0.07 ÷ 12 = 0.0058333; N = 300. Payment = $2,000,000 × 0.0058333 ÷ (1 − 1.0058333^−300) = $14,135.58. Because the term equals the amortization, k = 300 and the balloon formula returns zero: Balloon = $0. Interest through maturity = $14,135.58 × 300 − $2,000,000 = $4,240,674 − $2,000,000 = $2,240,675 (the tool's figure differs by a dollar from hand arithmetic because it carries unrounded cents). Origination fee = $10,000. Annual debt service = $169,627. This is the structure a 504 debenture or a long-term SBA 7(a) real estate loan provides: no refinancing event, at the price of a rate that is locked for a very long time and, on SBA loans, a prepayment fee in the early years.

Why commercial loans have a term and an amortization

A residential mortgage usually amortizes over the same period it runs: thirty years of payments, zero balance at the end. Commercial loans separate the two. The amortization period sets the payment, commonly 20 or 25 years on real estate and 5 to 10 on equipment and acquisitions. The term sets when the lender wants its money back, commonly 5, 7 or 10 years. Whatever is still owed at the end of the term, the balloon, must be refinanced, paid from a sale or paid from cash. Lenders structure loans this way to limit their interest-rate and credit exposure; borrowers accept it because the payment is far lower than a fully amortizing loan over the same term would allow.

This commercial loan calculator makes the trade visible. In example 1, the 25-year amortization produces a $7,553 payment; a fully amortizing 10-year loan at the same rate would require about $12,000 a month. The price of the lower payment is a balloon of $802,452 in year ten. The borrower who plans for that balloon from day one, by tracking the property's value, keeping the business bankable and knowing which lenders will refinance, treats the balloon as a scheduled event. The borrower who forgets it meets it in a rising-rate market with a property that appraises lower than expected.

Rates on commercial loans are usually quoted as a spread over a published index, commonly the prime rate or a Treasury or swap rate for the term, and reset at intervals or are fixed for the term. The Federal Reserve publishes the prime rate and Treasury yields daily in its H.15 statistical release, which is the reference most term sheets name. Enter the all-in rate, index plus spread, in the Interest rate field.

Interest-only periods: what they buy and what they cost

An interest-only period defers principal reduction. It is common on construction-to-permanent loans, value-add property where rents will rise after renovation, and acquisitions where the first year's cash flow is needed for integration. The tool models it exactly as most lenders do: the IO payment is Loan amount × rate ÷ 12 for the IO months, the balance is unchanged at the end of the IO period, and the amortizing payment is then calculated on the full amortization period from the original balance, not re-cast to fit the remaining term.

The cost is a larger balloon and more total interest, because principal that is not paid in year one continues to accrue interest for the whole term. In example 2 the IO year saves roughly $14,350 of outlay and adds a comparable amount to the balloon plus the extra interest on it. Some lenders re-amortize after the IO period over the remaining amortization, which produces a slightly higher payment and a smaller balloon than the tool shows; ask which convention the term sheet uses. The Interest-only months input is capped at the term, so a 60-month IO period on a 5-year term produces a loan that never amortizes and a balloon equal to the original amount.

Reading the outputs the way a lender does

Outputs and the underwriting ratios they feed
OutputRatio or testCommonly applied level
Annual debt serviceDSCR = NOI ÷ annual debt service1.20 to 1.35 on stabilized property; higher on special-purpose
Loan amountLTV = loan ÷ appraised value65 to 80 percent depending on property type and lender
Loan amountDebt yield = NOI ÷ loanCommonly 8 to 10 percent minimum on CMBS and bank loans
Balloon due at maturityRefinance test: balloon ÷ projected value at maturityMust clear the LTV the lender expects to apply then
Interest-only paymentIO-period DSCRSome lenders test coverage on the amortizing payment even during IO
Origination feeClosing cost budgetCommonly 0.5 to 1.5 points on bank loans; higher on bridge

Lenders size commercial loans on the lower of what the LTV limit allows and what the DSCR limit allows, and increasingly check debt yield as a third constraint because it does not depend on the interest rate or amortization. The commercial mortgage calculator applies all three to a purchase; the commercial real estate DSCR calculator builds NOI from the rent roll. Bank examiners review these ratios under the guidance in the OCC's commercial real estate lending handbook and the interagency guidance the FDIC publishes, which is why a bank's answer to a request outside policy is usually no rather than a higher rate.

Balloon risk and how to plan the exit

The balloon is a refinancing event that will happen in a market nobody can predict today. Three things determine whether it goes smoothly: the value of the collateral at maturity, the cash flow of the business or property at maturity, and the credit conditions of the moment. The borrower controls the first two. A property that has been maintained, leased and reported on cleanly refinances; a business that has kept its financial statements current and its tax filings clean refinances. The third is outside anyone's control, which is why many borrowers prefer a 10-year term to a 5-year one even at a slightly higher rate: it halves the number of times they must face the market.

  1. 1

    Know the number

    Write down the balloon figure from this calculator and the date it is due. Put it in the loan file and the calendar two years out.

  2. 2

    Test it against value

    Divide the balloon by a conservative estimate of value at maturity. If it exceeds the LTV lenders apply to that property type, you will need cash or a sale to refinance.

  3. 3

    Test it against cash flow

    A refinancing lender will underwrite the new payment at the rates of that day. Run the balloon through this calculator at a rate two points higher and confirm DSCR still clears 1.25.

  4. 4

    Line up the alternative

    If the balloon is on an SBA-eligible owner-occupied property, a 504 loan can take out a conventional balloon with a long fixed-rate debenture. If the property is investment property, a bridge loan can buy time but at a high price; see the bridge loan calculator.

  5. 5

    Start eighteen months early

    Commercial refinancing takes months: appraisal, environmental, legal, title. A borrower who starts a year and a half before maturity has two chances at the market.

Many commercial notes contain a prepayment structure, either a step-down penalty, yield maintenance or defeasance on securitized loans, that makes an early exit expensive. Check the note before planning to refinance early, and compare the saving with the business loan refinance calculator.

Fees, taxes and the all-in cost

The origination fee is only one closing cost. Appraisal, environmental assessment, lender legal, title insurance, recording and survey commonly add a further one to three percent on real estate; the loan closing cost calculator itemizes them. Interest on a business-purpose loan is generally a deductible business expense, and loan costs paid to obtain the loan are generally capitalized and deducted over the loan term rather than expensed at closing; the IRS small business pages and your CPA determine the treatment for the specific entity. Business-purpose credit is exempt from the federal Truth in Lending Act, so there is no mandated APR disclosure on a commercial loan; compute it yourself with the business loan APR calculator.

Rates and fees on commercial loans are negotiable within the lender's policy and competitive conditions. The Federal Reserve's Small Business Credit Survey reports on where small firms apply, approval rates by lender type and borrower satisfaction, which is useful context when a borrower asks whether a quoted structure is normal. Compare terms from several lenders on the same footing with the business loan rate comparison tool.

Glossary for commercial loan term sheets

  • Amortization: the schedule over which the payment would retire the loan; sets the payment, not the maturity.
  • Term or maturity: the date the loan must be repaid in full; the balloon is the balance on that date.
  • Interest-only period: months at the start when only interest is paid and the balance does not fall.
  • Balloon: the lump sum due at maturity; on a 25-year amortization with a 10-year term it is most of the original loan.
  • Debt service: the annual total of principal and interest payments; the denominator in DSCR.
  • Index and spread: the published rate (prime, Treasury, swap) and the margin above it that together make the note rate; the H.15 release is the usual reference.
  • Recourse: whether the lender can pursue the borrower or guarantor beyond the collateral; most bank commercial loans are full recourse, many securitized loans are non-recourse with carve-outs.
  • Prepayment structure: step-down, yield maintenance or defeasance; determines the cost of refinancing before maturity.

Questions people ask

What is the difference between the term and the amortization on a commercial loan?

Amortization is the period used to calculate the payment, commonly 20 to 25 years on real estate. Term is when the loan actually matures, commonly 5 to 10 years. Because the term is shorter, a balance remains at maturity, the balloon, which must be refinanced or paid. The calculator shows the payment from the amortization and the balloon from the term.

How is the balloon payment calculated?

It is the remaining balance after the amortizing payments made before maturity: Loan amount × (1 + r)^k − Payment × ((1 + r)^k − 1) ÷ r, with r the monthly rate and k the number of amortizing payments. On $1,000,000 at 7.75 percent, 25-year amortization and a 10-year term, k is 120 and the balloon is $802,452.

Does an interest-only period reduce the total cost?

No. It reduces the early payments and increases the balloon and total interest, because principal not paid during the IO period keeps accruing interest for the whole term. It is useful when early cash flow is needed elsewhere, such as during a renovation or an acquisition integration, not as a way to make a loan cheaper.

What DSCR do lenders require on a commercial loan?

Commonly 1.20 to 1.35 on stabilized property and higher for special-purpose or owner-occupied businesses with volatile cash flow. Divide the net operating income or business cash flow available for debt service by the Annual debt service output. Lenders also apply an LTV limit and, increasingly, a minimum debt yield, and size the loan on whichever is most restrictive.

Can I refinance a commercial balloon with an SBA loan?

If the property is owner-occupied and the business is SBA-eligible, a 504 loan or a 7(a) loan can refinance existing commercial debt under conditions the SBA sets for refinancing, which include that the new loan improves the borrower's position. Investment property is not eligible. Use the SBA loan qualification checker to screen the business first.

Sources and further reading

Site calculators on the same topic

Related tools and guides

More commercial loans

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Turn the estimate into real offers

One request, several funding partners, side-by-side payback. Nothing is binding until you accept an offer.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

Check commercial real estate loans offers

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.