Skip to content
Alternative Finance

Calculator

DSCR calculator and maximum loan amount

DSCR equals annual cash flow available for debt service divided by annual debt payments. Lenders want 1.2× – 1.25×. With $150,000 of cash flow and $30,000 of existing payments, a 1.25× requirement leaves $90,000 of annual capacity, which supports roughly a $570,000 loan at 10% over 10 years.

DSCR with the proposed loan
1.37×
Proposed annual debt service
$79,290
Maximum loan at 1.25× coverage
$567,534
Annual payment capacity at that coverage
$90,000
Banks and SBA lenders typically require 1.2 – 1.25×; commercial real estate lenders 1.2 – 1.35×. Use the EBITDA calculator to build the cash-flow figure the way an underwriter would.

How to use it

  1. Enter adjusted EBITDA or NOI and existing annual debt payments.
  2. Enter the proposed loan, rate and term.
  3. Enter the lender's minimum DSCR to see the maximum loan.

What the calculator does

  • DSCR = cash flow ÷ (existing debt service + proposed debt service)
  • Max annual service = cash flow ÷ target − existing
  • Max loan = principal supported by that annual payment

Limits of the estimate

  • Lenders may use different cash-flow definitions (EBITDA, NOI, global cash flow including the owner).

What goes in the numerator and why it changes the answer

Debt service coverage is a simple ratio with a contested numerator. The denominator, annual principal and interest on all debt, is usually agreed. The numerator can be EBITDA (earnings before interest, taxes, depreciation and amortization), adjusted EBITDA with lender-accepted add-backs, net operating income for real estate, or global cash flow that combines the business with the owner's personal income and personal debt. Each definition produces a different ratio from the same business. A bank term-loan officer typically uses adjusted EBITDA less distributions and taxes paid; a commercial real estate lender uses NOI; an SBA lender uses the method its credit policy prescribes under SOP 50 10. Ask which definition applies before you build the number.

The calculator accepts whatever cash-flow figure you enter and treats existing and proposed debt service as the denominator. Build the numerator with the EBITDA calculator, then subtract any distributions the owner must take for taxes and living expenses if the lender's method requires it. That subtraction is the most common reason an owner's self-calculated 1.6× becomes a lender's 1.1×.

Worked example one: coverage with a proposed loan

A trucking company in Indiana shows $210,000 of adjusted cash flow, carries $48,000 a year of existing payments on two tractors, and wants a $400,000 loan at 9.5% over 10 years for a terminal yard.

  1. Proposed monthly payment = $400,000 × 0.007917 ÷ (1 − 1.007917^−120) ≈ $5,175.90; annualized = $62,111.
  2. Total debt service = $48,000 + $62,111 = $110,111.
  3. DSCR = $210,000 ÷ $110,111 ≈ 1.91×.
  4. Cushion: cash flow could fall by $210,000 − 1.25 × $110,111 = $72,361, or about 34%, before coverage drops to 1.25×.

A 1.91× ratio clears any conventional threshold comfortably. The useful question is the fourth line: how much can revenue fall before the lender's covenant is breached. Many loan agreements require the borrower to maintain a minimum DSCR, tested annually from tax returns or quarterly from financial statements, and a breach is a default even if every payment was made on time. Knowing the cushion in dollars tells you how much room the business has to take on more debt, or to absorb a bad year, without triggering that clause.

Worked example two: the maximum loan at a target ratio

Same company, but the owner wants to know the largest loan the cash flow supports at a lender's 1.25× minimum and, for comparison, at a conservative 1.50×.

  1. Maximum total service at 1.25× = $210,000 ÷ 1.25 = $168,000. Less existing $48,000 = $120,000 of new annual capacity, or $10,000 a month.
  2. Principal that a $10,000 monthly payment supports at 9.5% over 120 months = $10,000 × (1 − 1.007917^−120) ÷ 0.007917 ≈ $772,800.
  3. At 1.50×: $210,000 ÷ 1.5 = $140,000; less $48,000 = $92,000 a year, $7,667 a month, supporting about $592,500.
Effect of the coverage target on the maximum loan ($210,000 cash flow, $48,000 existing service, 9.5%, 10 years)
Target DSCRNew annual capacityMaximum loan
1.15×$134,609$866,900
1.25×$120,000$772,800
1.35×$107,556$692,700
1.50×$92,000$592,500

A smaller business shows how term matters. With $95,000 of cash flow, $30,000 of existing service and a proposed $250,000 at 11%, a five-year term costs $65,227 a year and produces DSCR of about 1.00×, a decline. The same loan over ten years costs $41,325 a year and yields 1.33×, an approval. Nothing about the business changed; the term did. This is why lenders offer longer amortization on collateralized loans and why you should ask for it when coverage is tight.

Thresholds lenders and regulators actually use

Conventional commercial lenders commonly require 1.20× to 1.25× on term loans and 1.25× or higher on investment real estate; owner-occupied real estate and strong-credit borrowers sometimes see 1.15× or 1.20×. Earlier editions of the SBA's SOP 50 10 stated a 1.15× minimum for 7(a) loans on a historical or projected basis, and the current SOP directs lenders to follow their own policies for most loans, which usually means the conventional range. Bank examiners at the FDIC and OCC review whether a bank's underwriting standards, including coverage minimums, are documented and consistently applied; a loan made below the bank's stated minimum must carry a documented exception, which is why 'we can make an exception' from a loan officer is rarer than borrowers hope.

For investment real estate, the Federal Reserve's commercial real estate guidance and interagency statements emphasize stressed coverage: the lender recomputes DSCR at a higher interest rate and lower occupancy before approving. Expect the same on any floating-rate business loan: a lender that requires 1.25× at today's rate may also require coverage above 1.0× at a rate two or three points higher.

1.20× – 1.25×

commonly required on conventional business term loans

1.15×

minimum stated in earlier SBA SOP 50 10 editions for 7(a)

1.91×

worked example one, before stress

Where owners get the inputs wrong

  • Using net income instead of cash flow. Net income already deducts interest and depreciation; adding the proposed loan's full payment to a denominator while the numerator still carries existing interest double-counts.
  • Entering only the principal portion of existing payments. Debt service is principal plus interest. Pull the annual total from the amortization schedules or the business credit report.
  • Omitting credit-card balances, equipment leases and advance remittances. A lender counts every scheduled obligation, including daily MCA debits annualized.
  • Forgetting distributions. If the owner takes $90,000 of distributions to pay personal taxes and living costs, many lenders subtract that from cash flow before dividing.
  • Using a projected year. Lenders use the most recent full tax year, often averaged with the prior one, and discount interim statements. Build the ratio on the same basis.

Improving coverage before you apply

  1. 1

    Document add-backs

    One-time legal fees, a moving cost, an owner's above-market salary: each needs an invoice or a payroll record. The EBITDA guide lists what lenders accept.

  2. 2

    Refinance short debt into long

    Replacing a $60,000 balance paid over 18 months with the same balance over 60 months cuts annual service by more than half and lifts DSCR immediately.

  3. 3

    Retire daily-pay advances first

    An advance's annualized remittance is a large denominator item; paying it off with the new loan's proceeds, and showing that in the pro forma, often converts a decline into an approval.

  4. 4

    Ask for the longest sensible term

    As example two shows, term alone moved a loan from 1.00× to 1.33×.

  5. 5

    Reduce the request

    If coverage is 1.18× at $400,000, it is 1.25× at a lower amount the calculator will find directly.

Coverage interacts with everything else on this site. The working capital calculator shows the liquidity a lender checks alongside coverage; the stress test is a month-by-month version of the same question; and the SBA loan payment calculator produces the proposed debt service for a 7(a) request. For benchmarking what cash flow a business of your size typically produces, the Census Bureau's Annual Business Survey and BEA industry accounts publish aggregate figures; margins vary widely by industry, so compare within your sector rather than against an overall average.

Questions people ask

What DSCR do I need for an SBA loan?

The SBA's SOP has historically referenced 1.15× and now defers largely to lender policy, so the practical answer is the lender's own minimum, commonly 1.20× to 1.25×. Ask the lender for its number and its cash-flow definition before you prepare the package.

Is a DSCR of 1.0 acceptable?

Almost never for a new loan. At 1.0× every dollar of cash flow goes to debt, leaving nothing for taxes, distributions, capital expenditure or a bad month. Lenders view anything under about 1.15× as a decline or a restructure; existing loans with covenants are usually tested at 1.20× or 1.25×.

How is DSCR different from debt-to-income?

Debt-to-income compares monthly debt payments to gross monthly income and is a consumer measure. DSCR compares annual cash flow available for debt service to annual debt service and is the business measure. A DTI of 40% is roughly a coverage of 2.5×, but the numerators differ, so the two are not interchangeable.

Do lenders count my personal debts?

In a global cash-flow analysis, yes: mortgage, car loans, student loans and credit cards are added to the denominator, and the owner's wages and other income to the numerator. Banks and SBA lenders commonly use global analysis for closely held businesses; online lenders usually do not.

Can I include the income the new loan will generate?

Lenders generally require coverage from historical cash flow, with projected income as support rather than as the basis. For acquisitions and expansions, SBA guidance allows projections when supported by documentation, but expect them to be discounted and the first year scrutinized.

Sources and further reading

Related calculators

Funding options this applies to

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Ready to compare real offers?

Run your numbers, then request quotes. Partners see your request, you compare total payback with the calculators above, and nothing is binding until you sign.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

See what you may qualify for

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.