A $4,000 monthly payment supports about $180,000 over 60 months at 12%. Starting from affordability rather than from the lender's approval keeps the loan inside your cash flow.
Maximum loan this payment supports
$179,820
Total paid over the term
$240,000
Total interest
$60,180
Start from what the business can pay each month after owner draws and taxes, not from what a lender will approve.
How to use it
Enter the payment you can afford after owner draws and taxes.
Enter the expected rate and term.
Read the maximum principal.
What the calculator does
Principal = PMT × (1 − (1 + r)^−n) ÷ r
Limits of the estimate
Lenders also cap loans by revenue and collateral; this is the affordability ceiling, not the approval ceiling.
Working the amortization formula backwards
The payment formula takes principal and returns a payment; this calculator inverts it. Principal equals the payment multiplied by an annuity factor, (1 − (1 + r)^−n) ÷ r, which is the present value of one dollar paid every period for n periods at the periodic rate r. The annuity factor is the whole story: it grows as the term lengthens and shrinks as the rate rises, and because of the exponent it grows more slowly with each added year. Doubling the term never doubles the loan.
The right payment to enter is the one the business can sustain in a weak month, after owner draws, taxes and a reserve contribution, not the one it can cover in a strong month. Underwriters are going to compute the same thing from your tax returns and bank statements, and the output here is only useful if it predicts what they will find. The EBITDA calculator builds the annual cash-flow figure; dividing it by 1.25 and subtracting existing debt service, then dividing by 12, gives the lender's version of the affordable payment.
Worked example one: $2,500 a month
A landscaping company in North Carolina can commit $2,500 a month and expects a 10% rate.
Monthly rate = 10% ÷ 12 = 0.8333%.
48-month annuity factor = (1 − 1.008333^−48) ÷ 0.008333 ≈ 39.43. Maximum principal = $2,500 × 39.43 ≈ $98,570.
36 months: factor ≈ 30.99, principal ≈ $77,478.
84 months: factor ≈ 60.24, principal ≈ $150,592.
Rate sensitivity at 48 months: 7% supports $104,401; 14% supports $91,486. A seven-point swing in rate moves the ceiling by about $13,000, while adding three years to the term adds $52,000.
The lesson is that term is the lever and rate is the dial. If the company needs $130,000 for a fleet, a 48-month loan at any realistic rate will not get there on $2,500 a month; it needs either a longer term matched to the vehicles' useful life, or a larger payment, or a smaller purchase.
Worked example two: $6,000 a month and the lender's ceiling
A dental practice in Virginia can pay $6,000 a month. At 9% the ceiling is about $289,040 over 60 months and $473,650 over 120 months; at 12% over 60 months it drops to $269,730. Suppose the practice's adjusted cash flow is $150,000 a year with $20,000 of existing debt service. A lender requiring 1.25× coverage allows total service of $120,000, so new service of $100,000 a year or $8,333 a month, more than the practice chose to commit. The affordability ceiling ($289,040) is below the lender's ceiling (about $401,500 at 9% over 60 months), so affordability governs. Had the practice entered $9,000 a month, the lender's limit would have governed instead.
Ceiling for a $6,000 payment at 9% by term
Term
Annuity factor
Maximum loan
36 months
31.45
$188,680
60 months
48.17
$289,040
84 months
62.15
$372,920
120 months
78.94
$473,650
How lenders set their own maximum
Banks start from cash flow, as above, then check collateral coverage (the loan as a percentage of the liquidation value of what secures it) and leverage (total liabilities to net worth). For SBA 7(a) loans, lenders document repayment ability under SOP 50 10 and take available collateral up to the loan amount without declining a loan solely for lack of it. Online lenders usually size against revenue instead: a term loan of one to three times monthly deposits, an advance of roughly one to one-and-a-half times, a line of credit similar. The eligibility checker applies those rules of thumb.
The two approaches collide most often for businesses with high revenue and thin margins. A restaurant doing $150,000 a month may be offered a $200,000 advance by revenue-based sizing while its cash flow supports a payment of only $3,000 a month, which at 10% over 48 months is a loan of about $118,000. The revenue-based offer is the larger number and the more dangerous one. The Federal Reserve's Small Business Credit Survey regularly finds that firms with weak profitability report the highest reliance on high-cost products, which is the pattern that sizing on revenue rather than on cash flow produces.
Mistakes in choosing the payment
Using average cash flow. Use the slow season. A lender will look at twelve months of statements and see the slow months; so should you.
Forgetting taxes on pass-through income. A profitable S corporation's owner owes personal income tax on the profit whether or not it was distributed; the payment comes out of after-tax cash.
Ignoring owner draws. If the owner needs $8,000 a month to live, that is a fixed cost ahead of debt service in every lender's global cash-flow analysis.
Counting a new asset's projected income before it exists. Lenders discount projections; the affordable payment should be covered by current cash flow, with the new income as the cushion.
Committing the whole cushion. Leave room for a 20% to 25% revenue drop; the stress test shows whether the payment survives one.
Raising the ceiling honestly
1
Match the term to the asset life
Equipment lenders will go to the useful life; real estate lenders to 20 or 25 years. IRS Publication 946 class lives are a reasonable guide to what a lender considers normal.
2
Retire a small expensive debt first
Paying off a $15,000 balance with a $1,200 monthly payment frees $1,200 of capacity, which at 10% over 60 months supports about $56,000 of new borrowing.
3
Add a down payment
Each dollar of down payment is a dollar of purchase that needs no payment; on equipment it also improves the lender's collateral position and often the rate.
4
Improve the rate
Twelve months of clean statements and a credit score above 700 move most lenders a tier. The bad credit funding guide explains what moves the score fastest; annualcreditreport.com provides the reports to check.
5
Split the need
A line of credit for the working-capital portion and a term loan for the fixed asset usually supports more total capital than one loan for both, because the line is sized on receivables rather than on payment capacity.
The same payment buys different amounts under different structures
The calculator assumes a fully amortizing loan: each payment retires principal and the balance is zero at the end. Other structures stretch the same payment further on paper. On an interest-only line of credit at 12%, a $2,500 monthly payment services a $250,000 balance ($2,500 × 12 ÷ 0.12) indefinitely, but never repays it; the lender expects the balance to be cleared from receivables or refinanced. A balloon loan amortizes as if over a long term but comes due early: a $2,500 payment on a 20-year amortization at 10% supports roughly $259,000, with most of it still owed at a five-year balloon. A $1-buyout equipment lease behaves like the amortizing loan. These structures do not create capacity; they defer the day the principal must be found. If the balloon or line balance cannot be refinanced on that day, the business is in default with a payment history that looked perfect.
Use the amortizing figure as the honest ceiling and treat anything larger as a refinancing bet. Lenders know this: bank examiners expect balloon and interest-only loans to be underwritten on the borrower's ability to amortize, not just to service, and the FDIC's examination guidance describes that standard for commercial credit.
Questions people ask
Should I enter the payment before or after taxes?
After. The payment is made from cash that remains after the business and its owner have paid income taxes on profits. For a pass-through entity, estimate the owner's tax on business income and subtract it from monthly cash flow before deciding what is affordable.
Why does doubling the term not double the loan?
Because later payments are worth less today. The annuity factor at 10% is 30.99 for 36 months and 48.17 for 60 months: adding 24 months adds only 17 units of factor. Each additional year adds less than the one before, and at high rates the curve flattens quickly.
What rate should I assume?
Use a rate from an actual quote if you have one. Otherwise model a range: a bank or SBA rate near prime plus two to three points at the low end and an online term-loan rate in the high teens or twenties at the top. The [Federal Reserve's H.15 release](https://www.federalreserve.gov/releases/h15/) gives the current prime rate.
Does the lender care what I think I can afford?
Only indirectly. The lender computes affordability from your documents. But a request sized to your own payment capacity, with the arithmetic shown, reads as a well-prepared file and often gets a faster decision than a request for the maximum the lender might allow.
Run your numbers, then request quotes. Partners see your request, you compare total payback with the calculators above, and nothing is binding until you sign.
Soft inquiry to request offers; a hard pull only if you proceed with a funder.
Decisions in as little as 24 hours for many products; funding often within days.
Use our calculators to check the true cost before you accept anything.
See what you may qualify for
Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.