Skip to content
Alternative Finance

Calculator

Cash-flow stress test for daily debits

Subtract fixed costs and all financing debits from deposits, then repeat with deposits reduced by the test percentage. If the stressed cushion is negative or debits exceed 20% – 25% of stressed deposits, the financing stack is fragile and another advance will not fix it.

Cushion after a 25% drop
$3,500
Cushion today
$26,000
Debits as share of deposits today
10.0%
Debits as share of deposits after drop
13.3%
Funders treat combined debits above 15% – 20% of deposits as a default risk. If the stressed cushion is negative, the next advance will not fix it; talk to the existing funders about reconciliation or look at consolidation.

How to use it

  1. Enter monthly deposits, fixed costs and every financing debit.
  2. Choose a revenue drop to test, 25% is a common underwriting stress.

What the calculator does

  • Cushion = deposits × (1 − drop) − fixed costs − debits
  • Debit share = debits ÷ stressed deposits

Limits of the estimate

  • Variable costs are assumed to scale with revenue; if they do not, the result is optimistic.

Why fixed debits are the problem, not the revenue drop

A revenue decline hurts every business, but a business with only variable costs shrinks and survives. The damage comes from obligations that do not shrink: rent, salaried payroll, insurance, and above all financing debits that are fixed in dollars and collected daily or weekly. The stress test isolates that effect by holding fixed costs and debits constant while cutting deposits. The result, the stressed cushion, is the cash the business would generate (or consume) each month in the bad case. The debit share, financing debits divided by stressed deposits, is the figure funders themselves watch, because it predicts whether the next deposit will bounce the next debit.

The 25% default drop is not arbitrary. It is roughly the kind of decline underwriters at banks apply when they stress a borrower's projections, and it is within the range of a single bad quarter for most seasonal or discretionary businesses. The BLS Business Employment Dynamics data on establishment births and deaths and the Census Bureau's Business Trends and Outlook Survey show how common sharp revenue swings are; use your own worst recent quarter if it was worse than 25%.

Worked example one: a resilient stack

A specialty food distributor in Texas deposits $90,000 a month, carries $38,000 of fixed costs and services $14,000 a month of financing debits: an equipment loan, a term loan and one small advance.

  1. Base cushion = $90,000 − $38,000 − $14,000 = $38,000 (before variable costs, which scale with sales).
  2. Stressed deposits at a 25% drop = $90,000 × 0.75 = $67,500.
  3. Stressed cushion = $67,500 − $38,000 − $14,000 = $15,500.
  4. Debit share, base = $14,000 ÷ $90,000 = 15.6%; stressed = $14,000 ÷ $67,500 = 20.7%.
  5. Drop that zeroes the cushion = 1 − ($52,000 ÷ $90,000) ≈ 42%.

The business can lose a quarter of its revenue and still cover every fixed cost and every debit with $15,500 to spare, and it takes a 42% collapse to break it. The stressed debit share crosses 20%, which is where funders start to decline new positions, so this business should not add another advance, but the existing stack is survivable. The distributor's next financing should be cheaper and longer: a line of credit or a term loan that retires the advance.

Worked example two: a stack one bad month from failure

A restaurant in Florida deposits $60,000 a month with $30,000 of fixed costs and $16,000 of debits from two advances and a short-term loan. Base cushion = $60,000 − $30,000 − $16,000 = $14,000, which looks healthy. Stressed deposits = $45,000; stressed cushion = $45,000 − $30,000 − $16,000 = −$1,000. Debit share rises from 26.7% to 35.6%. The revenue drop that zeroes the cushion is only 1 − ($46,000 ÷ $60,000) ≈ 23%: one slow month, a hurricane week or a road closure.

Restaurant: cushion across revenue scenarios ($30,000 fixed, $16,000 debits)
Revenue dropDepositsCushionDebit share
0%$60,000+$14,00026.7%
10%$54,000+$8,00029.6%
20%$48,000+$2,00033.3%
25%$45,000−$1,00035.6%
35%$39,000−$7,00041.0%

A third advance offered to 'consolidate' the first two would add to the $16,000 line and move every row down. The only moves that improve this table are reducing the debit line (negotiating a reconciliation under the advance contracts' true-up clauses, refinancing into a monthly-pay term loan) or raising the fixed-cost line's flexibility (renegotiating rent, converting salaried roles to hourly). The stacking guide explains why consolidation offers usually make the second table worse.

How funders run the same test

Advance underwriters pull the bank statements and build a version of this table from them: total deposits by month, count and size of existing daily or weekly debits (identified by the originators' names on the ACH lines), negative-balance days and NSF returns. Their rule of thumb is a maximum combined debit share, commonly in the 15% to 25% range of deposits, above which they decline or cut the offer. Some will fund a position above that line at a higher factor and shorter term, which is how stacks like the restaurant's get built. Bank lenders run the equivalent as a sensitivity on projected cash flow, usually cutting revenue by a fixed percentage and raising rates on floating debt, as described in the FDIC's examination manual for commercial credit.

The regulatory frame matters here. SBA SOP 50 10 allows 7(a) proceeds to refinance existing debt, including expensive short-term obligations, when the refinancing improves cash flow by a documented margin; a stress table showing debits falling from $16,000 to a single monthly payment is exactly that documentation. For businesses in states with commercial financing disclosure laws, such as those administered by the California DFPI, the disclosure forms also state the estimated monthly cost of each advance, which can be entered here directly.

20.7%

stressed debit share, worked example one: survivable

35.6%

stressed debit share, worked example two: fragile

15% – 25%

commonly cited funder ceilings for combined debit share

Getting the inputs right

  • Deposits: total credits to the operating account from sales, excluding transfers from savings, loan proceeds and owner contributions. Those inflate the base and hide the problem.
  • Fixed costs: everything you pay regardless of sales, including the owner's draw, estimated taxes spread monthly and insurance spread monthly. Do not include cost of goods or hourly labor that falls with volume.
  • Debits: every financing obligation converted to a monthly figure. Daily remittance × 21; weekly × 4.33; monthly as is. Include credit-card minimums and equipment leases.
  • Variable costs: the calculator assumes they scale with revenue, so leave them out of fixed costs. If some are sticky (a minimum order, a labor contract), add that portion to fixed costs.
  • Revenue drop: use 25% as a floor and your own worst recent month as an alternative. A business that lost 40% in a past slow season should test 40%.

What to do with a negative result

  1. 1

    Stop adding positions

    A new advance raises the debit line; the table shows it cannot help.

  2. 2

    Invoke reconciliation clauses

    Send each advance funder the statements showing the decline and request the remittance adjustment the contract promises. The MCA guide explains the mechanism.

  3. 3

    Refinance to monthly

    A term loan or SBA loan that retires the stack converts daily debits into one monthly payment that is usually a fraction of the combined amount; use the DSCR calculator to show the lender the improvement.

  4. 4

    Convert fixed costs to variable

    Hourly scheduling, percentage rent where a landlord will agree, commission-based sales roles.

  5. 5

    Build the reserve in good months

    The cash runway calculator sets the target; a cushion of two to three months of debits turns a negative stressed month into an inconvenience rather than a default.

  6. 6

    Know the default mechanics

    If a debit bounces, most advance contracts declare default, accelerate the full balance and may invoke a confession of judgment where enforceable; the guide to confessions of judgment and guarantees describes what follows. Acting before the first bounce preserves options.

Related guides

Questions people ask

Why does the calculator ignore variable costs?

Because it assumes they fall in proportion to revenue, which is true of cost of goods and hourly labor. The cushion shown is therefore contribution margin minus fixed costs minus debits, not net profit. If a large share of your 'variable' costs is sticky, move that share into fixed costs for a more conservative result.

What debit share is safe?

Funders commonly draw the line somewhere between 15% and 25% of deposits for all positions combined. From the business's side, a stressed share under about 20% with a positive stressed cushion is survivable. Above 30% stressed, a single slow month produces bounced debits.

Should I include my own salary in fixed costs?

Yes, at the amount you actually need to take. A stress test that passes only because the owner stops paying themselves is not a pass; lenders include an owner's living expenses in global cash flow for the same reason.

How is this different from DSCR?

DSCR is annual and uses adjusted cash flow from tax returns; it answers whether the business can service debt over a year. The stress test is monthly and uses bank deposits; it answers whether the business can survive the next bad month. A business can pass DSCR and fail the stress test if its debt is concentrated in daily debits.

Can I test a revenue increase instead?

Enter a negative drop. The useful case is testing whether growth fixes a fragile stack: usually it does not, because true-split advances collect faster when sales rise, and because growth consumes working capital. The [revenue-based financing calculator](/calculators/revenue-based-financing/) shows the faster-collection effect.

Sources and further reading

Related calculators

Funding options this applies to

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Ready to compare real offers?

Run your numbers, then request quotes. Partners see your request, you compare total payback with the calculators above, and nothing is binding until you sign.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

See what you may qualify for

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.