Skip to content
Alternative Finance

Calculator

MCA daily payment and holdback calculator

Daily remittance equals daily card sales times the holdback percentage. Divide total payback by that number to estimate business days to repay. Funders usually keep the remittance under 15% – 20% of total deposits; anything higher strains payroll and rent.

Estimated daily remittance
$514.29
Total payback
$76,800
Estimated business days to repay
149
Estimated months to repay
7.1
Remittance as share of all deposits
9.0%
Assumes 21 business days per month and that card sales stay flat. With a true split, the daily amount falls when card sales fall; with a fixed ACH debit it does not. Funders generally want the remittance below about 15% – 20% of total deposits.

How to use it

  1. Enter monthly revenue and the share paid by card.
  2. Enter the holdback percentage from the offer.
  3. Enter the advance and factor rate.
  4. Check the daily remittance and the share of deposits it consumes.

What the calculator does

  • Daily card sales = monthly revenue × card share ÷ 21
  • Daily remittance = daily card sales × holdback
  • Business days to repay = (advance × factor) ÷ daily remittance

Limits of the estimate

  • Assumes 21 business days per month and flat sales.
  • Fixed ACH contracts ignore sales entirely; use the stress test for those.

Holdback, split and fixed ACH: three remittance mechanics

The calculator models a holdback: a fixed percentage of each day's card settlements that the processor diverts to the funder before the rest reaches your account. Two other mechanics appear in contracts and behave differently. A lockbox or split routes all card receipts to a controlled account, from which the funder takes its share and forwards the remainder, usually with a one-day delay that reduces your working cash. A fixed daily ACH debits a set dollar amount from your operating account regardless of sales; it is written as a percentage of receivables with a 'reconciliation' clause, but in practice the number does not move unless you ask for an adjustment and document a sales decline.

For a true holdback the days-to-repay figure is an estimate that floats with sales. For a fixed ACH it is a contractual count, and the holdback field here should be used in reverse: enter the daily debit the contract specifies, divide by your average daily deposits, and treat the result as the effective holdback. The stress test is built for that fixed-debit case.

Worked example one: a restaurant with high card volume

A restaurant in Ohio does $120,000 a month in sales, 70% by card, and is offered a $50,000 advance at 1.30 with a 12% holdback.

  1. Daily card sales = $120,000 × 70% ÷ 21 = $4,000.
  2. Daily remittance = $4,000 × 12% = $480.
  3. Total payback = $50,000 × 1.30 = $65,000.
  4. Business days to repay = $65,000 ÷ $480 ≈ 135 days, about 6.4 months.
  5. Total daily deposits = $120,000 ÷ 21 ≈ $5,714, so the remittance is $480 ÷ $5,714 ≈ 8.4% of deposits.

An 8.4% draw on deposits is at the comfortable end of what funders and the business can tolerate. The useful next step is the factor rate to APR calculator with 135 daily payments: the implied APR for this schedule is high because of the short term, but the business can clearly carry it.

Worked example two: a smaller business with a steep holdback

A salon in Nevada does $45,000 a month, 90% by card, and is offered $30,000 at 1.38 with an 18% holdback. Daily card sales = $45,000 × 0.9 ÷ 21 = $1,928.57. Remittance = $1,928.57 × 18% = $347.14. Payback = $30,000 × 1.38 = $41,400. Days = $41,400 ÷ $347.14 ≈ 119 days. Total deposits per day ≈ $2,142.86, so the remittance is 16.2% of deposits.

At 16% the business has crossed the line where payroll and rent start competing with the funder. The usual failure sequence from here: the owner delays a vendor, the vendor shortens terms, inventory tightens, sales dip, the remittance stays fixed (if it is an ACH) or the term extends (if it is a true holdback), and a broker calls offering a second position to 'bridge' the gap. The stacking guide explains why the second deal makes the first one worse. The right move at the offer stage is to ask for a 12% holdback over a longer term, which drops the remittance to $231 a day and the deposit share to about 11%.

Holdback sensitivity for the $30,000 at 1.38 example
HoldbackDaily remittanceBusiness daysShare of deposits
10%$192.862159.0%
12%$231.4317910.8%
15%$289.2914313.5%
18%$347.1411916.2%
22%$424.299819.8%

Reading the result like an underwriter

Funders pull three to six months of bank statements and compute average daily balance, total monthly deposits, deposit count, number of negative-balance days and the existing debits from other funders. The remittance they propose is sized so that all financing debits together stay under a ceiling that, in practice, is commonly in the 15% to 25% range of deposits for first positions and tighter for stacked files. The calculator's 'share of deposits' line is the number that matters to them. If yours comes out above 20%, expect either a smaller advance, a longer term, or a counteroffer that quietly raises the factor.

Two inputs deserve scrutiny. Card share: pull it from processor statements, not memory; restaurants and salons often overestimate it because cash tips and third-party delivery payouts settle differently. Monthly revenue: use the trailing three-month average, and if the Bureau of Labor Statistics' industry data shows your sector is seasonal, use the slowest quarter instead. The funder will.

21

business days per month assumed by the calculator

15% – 20%

commonly cited ceiling for total daily debits as a share of deposits

3 – 6 months

bank statements typically reviewed for a cash advance

Mistakes that make the estimate useless

  • Counting gross card sales before chargebacks, refunds and processor fees. The holdback is taken from net settlements in most contracts, so a 3% processing cost lengthens the real term.
  • Treating delivery-platform payouts as card sales. Third-party ordering platforms pay by ACH on their own schedule; some funders include those deposits in a split, most do not. Read the definition of 'receipts' in the agreement.
  • Entering annual revenue divided by twelve for a seasonal business. A pool contractor's August number tells you nothing about February.
  • Forgetting existing advances. If a first funder already takes 10% of card sales, a new 12% holdback produces a combined 22% draw.
  • Ignoring the processor switch. Many holdback deals require moving to the funder's processor; compare the new processing rate, because a half-point increase on $84,000 of monthly card volume is $420 a month on top of the remittance.

What to negotiate before signing

  1. 1

    Term before factor

    Ask for the lowest holdback the funder will accept. Longer terms at the same factor cost the same dollars and consume less cash per day.

  2. 2

    Written reconciliation procedure

    Get the contract section that explains how to request a remittance adjustment, how many days of statements are required, and how fast the funder must respond.

  3. 3

    No minimum daily amount on a true split

    A 'minimum daily remittance' clause converts a holdback into a fixed ACH during slow weeks. Strike it or lower it.

  4. 4

    Prepayment discount schedule

    If you expect a receivable or a tax refund, a discount for early payoff is worth more than a lower holdback.

  5. 5

    Confession of judgment and guarantee language

    Check the guide on confessions of judgment and personal guarantees; some states restrict their use against out-of-state businesses.

If the remittance share is above 15% even after negotiation, the advance is the wrong product. Invoice factoring for B2B sellers, a line of credit for anyone with twelve months of history and decent credit, or an SBA microloan for very small amounts will each cost less per day of cash. The Federal Trade Commission's small business guidance also covers what to do if a funder's collection practices cross into deception.

Checking the contract's own numbers

Advance contracts state a 'specified percentage' of receipts, a 'daily amount' and an 'estimated term'. The three should agree with each other and with your statements. Multiply the daily amount by 21 and divide by your average monthly deposits: the result should be close to the specified percentage times your card share. If the contract's daily amount implies 18% of deposits while the specified percentage reads 10%, the funder has sized the fixed debit on an inflated revenue figure, and the reconciliation clause will be your only protection. Run the same check on the estimated term: payback divided by the daily amount, divided by 21, should match the stated months. A gap means one of the three numbers was written to look better than the deal.

Keep the funding statement that shows the wire actually received. If it is less than the purchase price by more than the disclosed fees, the difference is an undisclosed charge, and the effective holdback on the money you really got is higher than the calculator shows.

Questions people ask

What happens to the remittance if sales fall?

On a true holdback the dollar amount falls with sales and the term extends; the funder bears the timing risk. On a fixed ACH the amount stays the same until you invoke the reconciliation clause. Document the decline with statements and request the adjustment in writing; a funder that refuses to reconcile is treating the deal as a loan, which can matter if the contract is ever disputed.

Why does the calculator use 21 business days?

A calendar month has roughly 21 to 22 weekdays after federal holidays. Twenty-one is conservative and slightly overstates the daily remittance, which is the safer error. If your contract lists an exact number of debits, divide payback by that count instead.

Does the holdback include processor fees?

Usually the holdback is applied to net settlements after interchange and processor fees. Read the receipts definition. If it applies to gross, the funder collects faster and the effective term shortens, which raises the APR you compute on the factor rate page.

Can I keep my current card processor?

Fixed ACH deals do not require a processor change. Split or lockbox deals almost always do, because the funder needs the processor to divert funds. Compare the new processor's rates and contract term; early termination fees on processing agreements can exceed the savings of a lower factor.

Sources and further reading

Related calculators

Funding options this applies to

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Ready to compare real offers?

Run your numbers, then request quotes. Partners see your request, you compare total payback with the calculators above, and nothing is binding until you sign.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

See what you may qualify for

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.