Skip to content
Alternative Finance

Calculator

EBITDA calculator with lender add-backs

EBITDA = net income + interest + taxes + depreciation + amortization. Lenders then add back excess owner salary above a market replacement and documented one-time expenses. The adjusted figure, divided by the required coverage ratio, sets your borrowing capacity.

Adjusted EBITDA
$225,000
EBITDA before add-backs
$145,000
Add-backs
$80,000
Adjusted EBITDA margin
18.8%
Lenders accept add-backs only with documentation. Excess owner salary and genuine one-time items are standard; personal expenses run through the business are accepted by some lenders and rejected by others. Feed the adjusted figure into the DSCR calculator.

How to use it

  1. Take the figures from the most recent business tax return or P&L.
  2. Enter owner compensation and what a replacement manager would cost.
  3. Enter one-time expenses you can document.

What the calculator does

  • EBITDA = NI + I + T + D + A
  • Adjusted EBITDA = EBITDA + (owner comp − market salary) + one-time items

Limits of the estimate

  • Undocumented add-backs are rejected; keep invoices and explanations.
  • Pass-through entities usually show zero entity-level income tax.

Where each line comes from on the tax return

Lenders rebuild EBITDA from the business tax return rather than from your bookkeeping, because the return is signed under penalty of perjury and can be verified against IRS transcripts requested with Form 4506-C. On a Form 1120-S, net income is the ordinary business income line, interest is the interest deduction line, depreciation comes from the return and from Form 4562, and amortization appears among other deductions. On a Schedule C the same items sit on different lines but the logic is identical. A C corporation shows income tax on the return; pass-through entities show none, because the tax is paid by the owners, which is why the T in EBITDA is often zero for small businesses.

The add-backs that turn EBITDA into adjusted EBITDA are the subject of negotiation. Interest and depreciation are mechanical. Owner compensation above a replacement salary, one-time expenses, personal expenses run through the business, and rent paid to a related entity above market are judgment calls, and each needs evidence: payroll records, invoices, a lease, a letter from the CPA. The EBITDA and cash-flow underwriting guide walks through the documentation; this page focuses on the arithmetic and on how lenders treat the result.

Worked example one: an S corporation with a well-paid owner

A plumbing contractor in Ohio files as an S corporation. The return shows ordinary business income of $62,000, interest expense of $14,000, depreciation of $21,000 and amortization of $3,000. The owner draws $180,000 of W-2 salary; a replacement manager would cost about $95,000. The year included $12,000 of legal fees for a one-time dispute that has been settled.

  1. EBITDA = $62,000 + $14,000 + $0 + $21,000 + $3,000 = $100,000.
  2. Excess owner compensation = $180,000 − $95,000 = $85,000.
  3. One-time items = $12,000, supported by the law firm's invoices and the settlement agreement.
  4. Adjusted EBITDA = $100,000 + $85,000 + $12,000 = $197,000.
  5. Borrowing capacity at a 1.25× coverage requirement = $197,000 ÷ 1.25 = $157,600 of annual debt service. With no existing debt, that supports roughly $994,000 at 10% over 10 years; with existing payments the DSCR calculator subtracts them first.

The add-backs nearly doubled the figure, which is exactly why underwriters scrutinize them. Expect the lender to ask for the replacement-salary basis (job postings or BLS occupational wage data for a comparable manager in the metro area are acceptable support), and to test the one-time claim against the prior year's return: if legal fees appear every year, they are not one-time.

Worked example two: when the adjustment goes the other way

A bakery in Oregon shows net income of $45,000, interest of $9,000, depreciation of $16,000 and no amortization, for EBITDA of $70,000. The owner takes only $30,000 of salary because the business cannot afford more, while a replacement manager would cost $80,000. A lender normalizes compensation in both directions: adjusted EBITDA = $70,000 − ($80,000 − $30,000) = $20,000. At 1.25× coverage that supports only $16,000 of annual debt service, about $101,000 at 10% over 10 years, and that is before any existing debt.

The bakery's owner may feel the business 'makes $70,000'. The lender's view is that it makes $20,000 after paying someone a market wage to run it, and that the difference is the owner's unpaid labor, which cannot be pledged. Underpaid owners are the second most common reason an apparently healthy small business fails underwriting; the first is undocumented add-backs.

Add-backs lenders commonly accept, question or reject
ItemTreatmentEvidence needed
Interest, depreciation, amortizationAccepted mechanicallyTax return
Owner salary above marketAccepted with supportPayroll records, wage benchmark
Owner salary below marketDeductedLender's own benchmark
One-time legal, moving or disaster costsAccepted if truly non-recurringInvoices, prior-year comparison
Personal auto, travel, meals run through businessQuestioned; partial acceptanceGeneral ledger detail
Above-market rent to owner's entityAccepted with lease and market comparisonLease, broker opinion
'Projected' savings or growthRejectedNone accepted

From adjusted EBITDA to cash available for debt service

Adjusted EBITDA is a starting point, not the final numerator. Most bank and SBA cash-flow analyses subtract three things before dividing by debt service: taxes actually paid or distributions taken to pay them, owner distributions needed for living expenses when the owner's salary is normalized downward, and maintenance capital expenditures, the replacement spending needed to keep equipment running. A trucking company with $300,000 of adjusted EBITDA that must replace a tractor every year has materially less cash for debt than a consulting firm with the same figure. The Comptroller's Handbook on commercial lending describes this cash-flow waterfall as the basis for repayment analysis, and SBA lenders apply the same discipline under SOP 50 10.

Public companies face a parallel discipline. The SEC requires any non-GAAP measure such as adjusted EBITDA to be reconciled to the nearest GAAP figure under Regulation G, and filings on EDGAR show how large companies justify each adjustment. Reading a few of those reconciliations is a useful model for presenting your own: list each add-back, state the amount, cite the document, and explain why it will not recur.

Input errors that inflate or deflate the figure

  • Adding back section 179 expensing twice. If the return already shows the full deduction as depreciation on Form 4562, add it once as part of depreciation; do not add it again as a 'one-time' item.
  • Adding back interest on an advance that is recorded as a purchase of receivables rather than as interest. The cost sits in a different expense line; find it and add it back explicitly, since the lender will count the remittances as debt service.
  • Treating guaranteed payments to partners as net income. On a partnership return they are a deduction; they are owner compensation and belong in the compensation normalization.
  • Ignoring related-party rent. If the business pays $120,000 of rent to the owner's real estate LLC and market rent is $80,000, the $40,000 difference is an add-back; if the business pays below market, it is a deduction.
  • Using a fiscal year that does not match the return. Interim statements must reconcile to the last filed return or the lender will discard them.

Raising adjusted EBITDA the legitimate way

  1. 1

    Clean the general ledger before year end

    Personal expenses booked to the business reduce reported income and are only partially recoverable as add-backs. Pay them personally and take a distribution instead.

  2. 2

    Set owner salary deliberately

    An S corporation owner must take reasonable compensation under IRS rules; setting it at a defensible market figure makes the normalization step neutral and simplifies underwriting. The IRS S corporation compensation guidance explains the standard.

  3. 3

    Isolate one-time items in their own accounts

    A separate ledger account for a lawsuit, a flood or a relocation makes the add-back self-documenting.

  4. 4

    Retire the most expensive debt before applying

    It does not change EBITDA but it reduces the denominator, which is what the DSCR calculator measures.

  5. 5

    Benchmark against your industry

    Margins vary widely by sector; BEA industry data and the Census Bureau's business surveys provide aggregate figures, and a lender comparing your 8% EBITDA margin with a sector norm will want to know why it is above or below.

Related guides

Questions people ask

Is EBITDA the same as cash flow?

No. EBITDA ignores working-capital changes, capital expenditure, taxes paid and distributions. A growing business can show rising EBITDA while cash falls because receivables and inventory absorb it. Lenders start from EBITDA because it is reproducible from the tax return, then adjust toward true cash available for debt service.

Why does the lender reject my owner-salary add-back?

Usually because the replacement salary you assumed is too low or unsupported. If you draw $180,000 and claim a $60,000 replacement cost for a role that requires a licensed manager, the lender will substitute its own benchmark. Use published wage data for the specific occupation and region, and expect the lender to add payroll taxes and benefits to the base figure.

Can I add back depreciation if I will need to replace the equipment?

Lenders add it back mechanically, then many subtract an estimate of maintenance capital expenditure. If your equipment genuinely needs annual replacement, a sophisticated lender will reduce cash flow by that amount. It is better to present the figure yourself than to have it discovered.

What if my business had a loss?

EBITDA can still be positive if interest and depreciation exceed the loss, and add-backs can lift it further. A negative adjusted EBITDA generally ends a bank or SBA application; revenue-based products may still be available, but at a cost the [ROI calculator](/calculators/roi-on-capital/) will usually show is unjustified.

How many years do lenders look at?

Commonly the last two or three filed returns plus a year-to-date statement. SBA lenders frequently require three years where available. A business under two years old is evaluated on projections and the owner's personal financial strength instead, which is why time in business is a threshold on the [eligibility checker](/calculators/funding-eligibility/).

Sources and further reading

Related calculators

Funding options this applies to

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Ready to compare real offers?

Run your numbers, then request quotes. Partners see your request, you compare total payback with the calculators above, and nothing is binding until you sign.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

See what you may qualify for

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.