Skip to content
Alternative Finance

Commercial loans · Brokers and property owners

Commercial mortgage calculator

This commercial mortgage calculator sizes a loan from purchase price and loan-to-value, computes the payment over the amortization, tests it against annual net operating income to produce the DSCR, shows the maximum loan the lender's minimum DSCR supports, and totals the cash needed to close including closing costs. It also reports cap rate and debt yield. It is for brokers, investors and owner-occupiers. Watch the maximum-loan-by-DSCR line: when it is below the LTV loan, the lender will size down and the equity requirement grows.

Monthly payment
$9,757.89
Loan amount
$1,350,000
DSCR
1.45
Maximum loan by DSCR
$1,567,961
Cash needed to close
$495,000
Cap rate
9.44%
Debt yield (NOI ÷ loan)
12.6%

Lenders size commercial mortgages on the lower of LTV and DSCR limits. When the DSCR limit binds, the loan shrinks and the equity requirement grows.

Your funding estimate

$1,350,000

Estimated amount from your inputs, about $9,758 per month over 25 years. An example calculation, not an offer from any lender.

Compare funding options

Formula

Loan amount = Purchase price or value × Loan to value ÷ 100

Monthly payment = Loan amount × r ÷ (1 − (1 + r)^−N), where r = Interest rate ÷ 12 and N = Amortization (years) × 12; Annual debt service = Monthly payment × 12

DSCR = Annual net operating income ÷ Annual debt service; Maximum loan by DSCR = present value, at r over N, of a monthly payment equal to (NOI ÷ Lender minimum DSCR) ÷ 12

Cash needed to close = Purchase price − Loan amount + Purchase price × Closing costs ÷ 100

Cap rate = NOI ÷ Purchase price; Debt yield = NOI ÷ Loan amount

Worked examples

Example 1: $1,800,000 property at 75 percent LTV, 7.25 percent, NOI $170,000

Use the defaults: Purchase price $1,800,000, Loan to value 75 percent, Interest rate 7.25 percent, Amortization 25 years, Annual net operating income $170,000, Closing costs 2.5 percent, Lender minimum DSCR 1.25. Loan amount = $1,800,000 × 0.75 = $1,350,000. r = 0.0725 ÷ 12 = 0.0060417; N = 300. Payment = $1,350,000 × 0.0060417 ÷ (1 − 1.0060417^−300) = $9,757.89. Annual debt service = $9,757.89 × 12 = $117,095. DSCR = $170,000 ÷ $117,095 = 1.45, above the 1.25 minimum. Maximum debt service the lender allows = $170,000 ÷ 1.25 = $136,000 a year, or $11,333.33 a month; the loan that payment supports at 7.25 percent over 300 months = $1,567,961, which is above the LTV loan, so LTV is the binding constraint. Cash needed to close = $1,800,000 − $1,350,000 + $1,800,000 × 0.025 = $450,000 + $45,000 = $495,000. Cap rate = $170,000 ÷ $1,800,000 = 9.44 percent. Debt yield = $170,000 ÷ $1,350,000 = 12.6 percent. Both ratios are comfortable; the lender will fund at 75 percent.

Example 2: $950,000 property at 80 percent LTV where DSCR binds

Enter Purchase price $950,000, Loan to value 80 percent, Interest rate 7.75 percent, Amortization 25 years, NOI $72,000, Closing costs 3 percent, Lender minimum DSCR 1.25. Loan amount = $950,000 × 0.80 = $760,000. r = 0.0775 ÷ 12 = 0.0064583. Payment = $760,000 × 0.0064583 ÷ (1 − 1.0064583^−300) = $5,740.50. Annual debt service = $68,886. DSCR = $72,000 ÷ $68,886 = 1.05, below 1.25, so the DSCR output turns to a warning. Maximum debt service = $72,000 ÷ 1.25 = $57,600 a year = $4,800 a month; the loan that supports = $635,485. The lender will offer about $635,000, not $760,000. Cash needed to close at the requested LTV would be $190,000 + $28,500 = $218,500, but at the DSCR-sized loan it rises to $950,000 − $635,485 + $28,500 = $343,015. Cap rate = 7.58 percent, debt yield = 9.5 percent. The buyer is paying a price whose yield is close to the cost of debt, which is exactly when DSCR, not LTV, sizes the loan.

Example 3: owner-occupied $2,400,000 building at 90 percent with an SBA-style structure

Enter Purchase price $2,400,000, Loan to value 90 percent, Interest rate 7 percent, Amortization 25 years, NOI $260,000 (the operating company's cash flow available for occupancy cost plus the rent it would otherwise pay), Closing costs 2 percent, Lender minimum DSCR 1.2. Loan amount = $2,160,000. r = 0.0058333. Payment = $2,160,000 × 0.0058333 ÷ (1 − 1.0058333^−300) = $15,266.43. Annual debt service = $183,197. DSCR = $260,000 ÷ $183,197 = 1.42. Maximum debt service = $260,000 ÷ 1.2 = $216,667 = $18,055.56 a month; maximum loan = $2,554,625, above the LTV loan, so the 90 percent structure holds. Cash needed to close = $240,000 + $48,000 = $288,000. Cap rate = 10.83 percent; debt yield = 12.0 percent. A conventional lender would rarely go to 90 percent; the structure is what a 504 loan achieves by pairing a 50 percent bank first lien with a 40 percent SBA debenture and a 10 percent injection, which this calculator approximates with a single blended rate.

The three constraints every commercial mortgage is sized on

Lenders do not lend a percentage of price; they lend the least of three numbers. Loan-to-value caps the loan at a share of appraised value, commonly 65 to 80 percent depending on property type, with lower limits for special-purpose, land and hospitality. Debt service coverage caps the loan at the amount whose payment the property's net operating income covers with a margin, commonly 1.20 to 1.35. Debt yield caps the loan at NOI divided by a minimum yield, commonly 8 to 10 percent, and is popular with securitized and larger bank lenders because it ignores both the rate and the amortization and therefore cannot be gamed by a longer schedule or a lower coupon.

This commercial mortgage calculator shows all three. Loan amount is the LTV number. Maximum loan by DSCR is the coverage number, and it turns to a warning when it is below the LTV loan, because that is the case where the lender sizes down. Debt yield is reported so you can compare it with the lender's floor. In example 2 the LTV loan is $760,000, the DSCR loan is $635,485 and the debt yield at the LTV loan is 9.5 percent; a lender with a 10 percent debt-yield floor would size to $720,000 on that test, and the DSCR test is tighter still, so the DSCR loan is the offer.

The relationship between cap rate and interest rate drives which constraint binds. When the cap rate is well above the all-in loan constant (annual debt service ÷ loan), as in example 1 at 9.44 percent against a constant of about 8.7 percent, LTV binds. When the cap rate approaches or falls below the constant, as in example 2 at 7.58 percent against about 9.1 percent, DSCR binds and leverage falls no matter what LTV the lender advertises. Underwriting guidance for banks, including the OCC's commercial real estate lending handbook, expects the lender to document all three tests.

Getting the NOI input right

Everything on the DSCR side depends on Annual net operating income. For investment property, NOI is effective gross income (scheduled rent plus other income, less vacancy and credit loss) minus operating expenses (taxes, insurance, utilities the landlord pays, repairs, management) and minus replacement reserves, before any debt service and before depreciation. Build it line by line with the commercial real estate DSCR calculator, which also shows how the DSCR moves when rate, vacancy or expenses change. Lenders apply their own vacancy and expense assumptions, usually more conservative than the seller's marketing package, and will underwrite to in-place rents rather than projected ones.

For owner-occupied property the lender looks at the operating business. The hint on the NOI field says it: use the business's EBITDA plus the rent it currently pays, because that rent will stop when the business owns the building and becomes available for the mortgage payment. Subtract a market-level owner salary and any distributions needed for taxes. The EBITDA and cash flow underwriting guide covers the add-backs lenders accept and reject. A business with volatile earnings will be asked for a higher DSCR than a leased building with credit tenants.

Cash needed to close, and where it goes

Cash needed to close is the down payment (price minus loan) plus closing costs as a share of price. The down payment is the equity the lender requires; closing costs are the third-party and lender charges that a commercial purchase carries. Commonly these include an appraisal by a state-certified general appraiser, a Phase I environmental site assessment and sometimes a Phase II, lender legal review, title insurance and a lender's policy, recording fees, survey, and the lender's origination fee. The 2.5 percent default is a planning figure; itemize the actual costs with the loan closing cost calculator.

Lenders also look at post-closing liquidity: the cash the borrower has left after closing, often expressed as months of debt service. A buyer who puts every dollar into the down payment and closing costs and has nothing in reserve for a vacancy or a roof is a weaker credit than the DSCR alone suggests. When the DSCR-sized loan is smaller than the LTV loan, the shortfall comes out of the buyer's cash, as example 2 shows: an extra $124,515 of equity on a $950,000 purchase. Options at that point are to negotiate the price down, to bring in a partner, to find a lender with a lower DSCR floor or longer amortization, or to walk away.

How a change in one input moves the result (from example 1)
ChangeEffect on DSCREffect on cash to close
Rate +1 point (8.25 percent)Falls toward 1.32 as the payment risesNo change at the same LTV
LTV 70 percent instead of 75Rises as the loan and payment fallRises by 5 percent of price ($90,000)
NOI −10 percent ($153,000)Falls to about 1.31; still clears 1.25No change unless the lender re-sizes
Amortization 20 years instead of 25Falls as the payment risesNo change at the same LTV
Closing costs 4 percent instead of 2.5No changeRises by 1.5 percent of price ($27,000)

Owner-occupied versus investment, and the SBA route

Conventional lenders treat owner-occupied and investment property differently. Owner-occupied property, where the borrower's operating business occupies a majority of the space, is underwritten on the business's cash flow and often qualifies for higher leverage and longer amortization because the lender has a relationship with an operating company, not just a rent roll. Investment property is underwritten on the lease income and the strength of the tenants, and carries lower LTV limits and higher DSCR floors, particularly for single-tenant or short-lease buildings.

Owner-occupied property is also where the SBA programs apply. A 504 loan finances fixed assets through a bank first lien, typically 50 percent, and an SBA-guaranteed debenture, typically 40 percent, leaving a 10 percent injection that rises for start-ups and special-purpose buildings; the debenture carries a long fixed rate. A 7(a) loan can finance real estate on a 25-year term as a single loan. Both require the business to occupy the required share of the building and to meet the program's eligibility rules; screen them with the SBA loan qualification checker and size them with the SBA 504 loan calculator. Investment property is not eligible for either program and goes to a conventional commercial real estate loan.

Rates, resets and the refinancing event

Most bank commercial mortgages are not fixed for the amortization period. A common structure fixes the rate for five, seven or ten years and then either matures with a balloon or resets to a margin over an index for the remainder. The Interest rate field takes the initial rate; test the reset by re-running the calculator at the index plus margin the note specifies at a higher index level. The Federal Reserve's H.15 release publishes the prime rate and Treasury yields that these notes reference. For the balloon structure itself, including the balance due at maturity, use the commercial loan calculator.

A DSCR of 1.45, as in example 1, is a cushion against rate resets and vacancy; a DSCR of 1.25 exactly is the lender's minimum, and any adverse change puts the loan in covenant trouble. Many commercial notes include an ongoing DSCR covenant tested annually from the borrower's operating statements, with a cash-sweep or re-margining remedy if it is breached. Compare the fixed vs variable loan calculator results for the same loan before choosing a floating-rate structure that starts cheaper.

Market context for the ratios

Cap rates vary by property type, location and tenant quality, and move with interest rates over time; a cap rate that is low relative to borrowing costs produces the DSCR squeeze shown in example 2. The National Association of Realtors publishes commercial market reports, and the Federal Reserve publishes financial stability and lending-standard surveys that describe how commercial real estate credit conditions are tightening or easing. Use them as context for whether a lender's LTV and DSCR floors are typical of the moment rather than as inputs.

Brokers presenting a request should lead with the binding constraint. If LTV binds, show the appraisal support. If DSCR binds, show the rent roll, the lease expiry schedule and the expense history. If debt yield binds, there is no structuring fix; only a lower price or more equity solves it. Presenting all three ratios on the first page of a package, as this calculator produces them, is the single most effective way to shorten a commercial mortgage approval.

Questions people ask

How much can I borrow on a commercial mortgage?

The least of three limits: loan-to-value (commonly 65 to 80 percent of appraised value), the loan whose payment the net operating income covers at the lender's minimum DSCR (commonly 1.20 to 1.35), and the loan at which NOI divided by loan clears the lender's debt-yield floor (commonly 8 to 10 percent). The calculator shows the LTV loan, the DSCR loan and the debt yield so you can see which binds.

What is a good DSCR for a commercial mortgage?

Lenders commonly require at least 1.20 to 1.25 on stabilized multi-tenant property and more on single-tenant, special-purpose or owner-occupied buildings with volatile earnings. A DSCR above 1.40 gives room for rate resets and vacancy. Below the lender's floor the loan is sized down to the maximum loan by DSCR shown in the tool.

How much cash do I need to buy a commercial property?

The down payment (price minus loan) plus closing costs, which commonly run one to three percent of price for appraisal, environmental assessment, legal, title, recording and the lender's fee, plus post-closing reserves the lender may require. On a $1.8 million purchase at 75 percent LTV with 2.5 percent closing costs the tool shows $495,000.

What is debt yield and why do lenders use it?

Debt yield is NOI divided by the loan amount. It measures the return the lender would earn on the loan balance if it owned the property, and unlike DSCR it does not depend on the interest rate or amortization, so a longer schedule or a lower coupon cannot improve it. Lenders commonly set floors of 8 to 10 percent; the calculator reports it next to DSCR.

Can I use a commercial mortgage calculator for an owner-occupied building?

Yes. Enter the business's cash flow available for occupancy, meaning EBITDA plus the rent it currently pays and minus a market owner salary, as NOI. The lender underwrites the operating company rather than a rent roll. Owner-occupied property is also eligible for SBA 504 and 7(a) financing at higher leverage than conventional lenders offer.

Sources and further reading

Site calculators on the same topic

Related tools and guides

More commercial loans

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Turn the estimate into real offers

One request, several funding partners, side-by-side payback. Nothing is binding until you accept an offer.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

Check commercial real estate loans offers

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.