Skip to content
Alternative Finance

Loan calculators · Small business owners

SBA 504 calculator

This SBA 504 calculator takes a total project cost and your contribution percentage and splits the project three ways: a bank first lien for 50 percent, a fixed-rate debenture through a Certified Development Company for the remainder, and your equity. It then computes the monthly payment on each piece at its own rate and term. It is for owners buying real estate or heavy equipment. The thing to watch is the debenture's effective rate, which includes fees the quoted bond rate does not.

Combined monthly payment
$10,340.54
Bank first lien (50%)
$750,000
CDC debenture
$600,000
Your contribution
$150,000
Bank payment
$6,041.95
CDC payment
$4,298.59

The 504 structure pairs a conventional first lien with a fixed-rate debenture issued through a Certified Development Company. Debenture fees are added to the CDC loan; ask the CDC for the effective rate.

Project funding split
$750,000Bank$600,000CDC$150,000Equity

Your funding estimate

$1,350,000

Estimated amount from your inputs, about $10,341 per month. An example calculation, not an offer from any lender.

Compare funding options

Formula

Bank first lien = total project cost × 50 percent. Your contribution = total project cost × borrower contribution. CDC debenture = total project cost × (50 percent − borrower contribution).

Bank payment = bank loan × r₁ ÷ (1 − (1 + r₁)^−n₁), where r₁ = bank first-lien rate ÷ 12 and n₁ = bank loan term × 12.

CDC payment = CDC debenture × r₂ ÷ (1 − (1 + r₂)^−n₂), where r₂ = CDC debenture rate ÷ 12 and n₂ = CDC debenture term × 12.

Combined monthly payment = bank payment + CDC payment.

Worked examples

Example 1: a $1.5 million building with the standard 10 percent contribution (the defaults)

Total project cost $1,500,000; contribution 10 percent. Split: bank = $1,500,000 × 0.50 = $750,000; equity = $1,500,000 × 0.10 = $150,000; CDC = $1,500,000 × (0.50 − 0.10) = $600,000. Bank payment at 7.5 percent over 20 years: r₁ = 0.075 ÷ 12 = 0.00625, n₁ = 240; (1.00625)^−240 = 0.2242; 1 − 0.2242 = 0.7758; $750,000 × 0.00625 = $4,687.50; $4,687.50 ÷ 0.7758 = $6,041.95. CDC payment at 6 percent over 20 years: r₂ = 0.005, n₂ = 240; (1.005)^−240 = 0.3021; 1 − 0.3021 = 0.6979; $600,000 × 0.005 = $3,000; $3,000 ÷ 0.6979 = $4,298.59. Combined = $6,041.95 + $4,298.59 = $10,340.54 a month. The tool shows the same six figures: $10,340.54 combined, $750,000 bank, $600,000 CDC, $150,000 contribution, $6,041.95 and $4,298.59.

Example 2: an $800,000 special-purpose property bought by a start-up

A start-up buying a special-purpose property (a car wash, say) must contribute 20 percent; a start-up buying a general-purpose building, or an established business buying a special-purpose one, contributes 15 percent. Take the 15 percent case. Project $800,000: bank = $400,000; equity = $800,000 × 0.15 = $120,000; CDC = $800,000 × (0.50 − 0.15) = $280,000. Bank at 8 percent over 25 years: r₁ = 0.0066667, n₁ = 300; (1.0066667)^−300 = 0.1363; $400,000 × 0.0066667 = $2,666.67; $2,666.67 ÷ 0.8637 = $3,087.26. CDC at 6.5 percent over 25 years: r₂ = 0.0054167, n₂ = 300; (1.0054167)^−300 = 0.1979; $280,000 × 0.0054167 = $1,516.67; $1,516.67 ÷ 0.8021 = $1,890.58. Combined = $4,977.84. The higher contribution lowers the CDC piece from 40 to 35 percent, so the owner needs $40,000 more cash at closing but pays about $270 less a month than the 10 percent structure would.

Example 3: $600,000 of machinery on 10-year terms

Equipment projects use the 10-year debenture, and the bank loan is usually matched to it. Project $600,000, contribution 10 percent: bank = $300,000; equity = $60,000; CDC = $240,000. Bank at 7 percent over 10 years: r₁ = 0.0058333, n₁ = 120; (1.0058333)^−120 = 0.4976; $300,000 × 0.0058333 = $1,750; $1,750 ÷ 0.5024 = $3,483.25. CDC at 5.5 percent over 10 years: r₂ = 0.0045833, n₂ = 120; (1.0045833)^−120 = 0.5777; $240,000 × 0.0045833 = $1,100; $1,100 ÷ 0.4223 = $2,604.63. Combined = $6,087.89 a month. Compare that with the same $540,000 financed as a straight equipment loan at 9.5 percent over 84 months, which the equipment financing calculator puts near $8,800; the 504 payment is lower because the term is longer and the debenture rate is fixed below market, at the price of a slower closing.

How the 504 structure works

The 504 program finances fixed assets, mainly owner-occupied commercial real estate and long-lived equipment, through two loans. A bank or other private lender makes a first-lien loan for up to 50 percent of the project at its own rate and term. A Certified Development Company, a non-profit licensed by SBA, provides up to 40 percent through a debenture that is pooled and sold to investors with a full SBA guarantee; the debenture rate is fixed for its life and set at each monthly sale. You contribute the rest, 10 percent in the standard case. The maximum debenture is $5 million, or $5.5 million for small manufacturers and certain energy projects; the bank portion has no SBA cap, so total projects can be much larger.

Borrower contribution rules
SituationContributionCDC share
Established business, general-purpose property10%40%
Start-up (commonly under two years) or special-purpose property15%35%
Start-up and special-purpose property20%30%

Eligible project costs include land, existing buildings, construction, renovation, machinery, and the soft costs of the project such as appraisal and closing. Working capital, inventory and debt consolidation are not 504 purposes; a 7(a) loan covers those, and the SBA 7(a) calculator prices it. The business must occupy a majority of an existing building it buys, with a higher occupancy requirement for new construction.

The debenture rate versus the effective rate

The rate you enter for the CDC piece should be the effective rate, not the bond coupon. The debenture carries an ongoing SBA guarantee fee, a CDC servicing fee and a central servicing agent fee, all of which are added to the note rate; the CDC will quote you an effective rate that includes them. Up-front fees (the CDC processing fee, the SBA guarantee fee on the debenture, underwriting and legal) are financed into the debenture, so the net debenture is slightly larger than the 40 percent share shown here. Ask the CDC for the gross debenture amount and the effective rate and enter those for a precise payment.

The bank piece is priced like any commercial mortgage: often a fixed rate for five or ten years, then a reset, on a 20- or 25-year amortization. Because the bank sits in first position with only 50 percent loan-to-value, it is well protected and its rate is usually below what the same bank would charge on a conventional 75 or 80 percent loan. That is the quiet advantage of the 504: the bank's rate is lower because the CDC is behind it.

Reading the combined payment against your cash flow

The combined payment replaces rent, so the first comparison is simple: is $10,340.54 a month more or less than what you pay a landlord for similar space, after adding property taxes, insurance and maintenance you will now carry? The second comparison is the lender's: annual net operating income of the business divided by annual debt service, including the new payments, should land at or above the lender's minimum, commonly 1.2 to 1.35. On the default project, annual debt service is $124,086, so a 1.25 target requires about $155,000 of annual cash flow after owner pay and taxes for the building alone.

Run the DSCR calculator with the combined annual payment, or the commercial real estate DSCR calculator if part of the building will be leased to tenants, whose rent counts toward coverage. If coverage is short, the levers are a larger contribution (which lowers the CDC piece), a longer bank amortization, or a smaller project.

  • Sanity check the split: bank + CDC + equity must equal the project cost. If your CDC quotes a different split, it is usually because fees were financed or because the property type triggers a higher contribution.
  • Appraisal risk: the bank lends against the lower of cost and appraised value. If the appraisal comes in low, your contribution rises.
  • Rate timing: the debenture rate is set at the monthly sale after the bank closes, so the CDC payment is not final until then. Budget for a rate half a point above the current one.

Qualifying and the closing process

  1. 1

    Confirm eligibility

    For-profit, within SBA size standards (504 uses a tangible net worth and after-tax income test as an alternative to industry size standards), owner-occupied, and a project that creates or retains jobs or meets a public-policy or community-development goal.

  2. 2

    Find a CDC and a bank

    CDCs are regional; SBA's local assistance directory and the 504 program page point you to them. Many banks have a 504 desk and a CDC they work with regularly.

  3. 3

    Assemble the file

    Three years of business and personal tax returns, interim financials, a debt schedule, the purchase contract or equipment quote, construction budgets, and projections if the project changes the business materially. Our documents guide has the list.

  4. 4

    Close the bank loan, then the debenture

    The bank typically funds first, often with an interim loan covering the CDC share until the debenture sells. The debenture closes at the next monthly funding, which is when the fixed rate is locked.

  5. 5

    Keep the covenants

    Expect annual financial statements, insurance requirements, occupancy maintenance and limits on additional liens. Ongoing fees are built into the payment, so there is nothing extra to pay month to month.

504 against a conventional commercial mortgage

A conventional commercial mortgage usually requires 20 to 30 percent down and prices the whole loan at the bank's rate; the commercial mortgage calculator models it. The 504 halves the down payment and fixes 40 percent of the project at a below-market rate for 20 or 25 years. The costs of that advantage are time (two lenders, two closings), fees financed into the debenture, the prepayment premium, and the occupancy and eligibility rules. For an owner who intends to hold the building for a decade, the 504 is usually the cheaper structure; for one who may sell within five years, the premium and the slower close can erase the advantage.

Taxes follow ownership rather than the loan: interest on both pieces is deductible, the building is depreciated over its recovery period under IRS Publication 946, and equipment financed through a 504 may qualify for Section 179 expensing. Many owners hold the real estate in a separate entity that leases it to the operating business; the 504 rules allow this eligible passive company structure, and your CPA should be in the room when you choose it.

Questions people ask

What is the 50/40/10 structure in an SBA 504 loan?

A bank lends 50 percent of the project cost in first position, a Certified Development Company lends 40 percent through an SBA-guaranteed debenture in second position, and the borrower contributes 10 percent. Start-ups and special-purpose properties push the contribution to 15 percent, and both together to 20 percent, with the CDC share falling to match.

Is the SBA 504 rate fixed?

The CDC debenture rate is fixed for the full 10, 20 or 25 years, set at the monthly debenture sale after your bank loan closes. The bank first lien is priced by the bank and is commonly fixed for an initial period and then adjustable. Ask the CDC for the effective rate, which includes the ongoing guarantee and servicing fees.

What can a 504 loan be used for?

Fixed assets: buying land or an existing building, construction or renovation, and long-lived machinery and equipment, plus the project's soft costs. It cannot fund working capital, inventory, or most refinancing of unrelated debt. The business must occupy most of the property.

How big can an SBA 504 loan be?

The debenture is capped at $5 million, or $5.5 million for small manufacturers and certain energy-efficiency projects. Because the bank portion has no SBA cap, total project sizes can be well above $10 million. There is no formal minimum, but CDC fees make very small projects inefficient.

Does this SBA 504 calculator include the debenture fees?

Only if you enter the CDC's effective rate rather than the coupon. The up-front fees financed into the debenture make the actual note slightly larger than the 40 percent shown. For a precise payment, ask the CDC for the gross debenture amount and the effective rate, and enter those.

Sources and further reading

Site calculators on the same topic

Related tools and guides

More loan calculators

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Turn the estimate into real offers

One request, several funding partners, side-by-side payback. Nothing is binding until you accept an offer.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

Check sba loan offers

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.