Skip to content
Alternative Finance

Loan calculators · Small business owners

Equipment loan calculator

This equipment loan calculator prices a purchase financed with a down payment and a fixed-rate loan: the monthly payment, total interest and documentation fee, an illustrative first-year Section 179 deduction at your marginal tax rate, and the net cost of ownership after the equipment's resale value. It is for owners comparing a loan with cash, a lease or doing without. The thing to watch is the tax line: it assumes the full price qualifies for first-year expensing, which depends on limits and your own tax position.

Monthly payment
$1,606.64
Amount financed
$76,500
Total interest and fees
$20,249
Illustrative first-year Section 179 tax saving
$25,500
Net cost of ownership over the term
$59,749
Payment as share of price per month
1.89%

Section 179 lets many businesses deduct the full price of qualifying equipment in the year it is placed in service, subject to annual limits set by the IRS; confirm eligibility and limits with your CPA.

Your funding estimate

$76,500

Estimated amount from your inputs, about $1,607 per month over 60 months. An example calculation, not an offer from any lender.

Compare funding options

Formula

Amount financed = equipment price × (1 − down payment). Monthly payment = amount financed × r ÷ (1 − (1 + r)^−months), where r = annual interest rate ÷ 12.

Total interest = monthly payment × months − amount financed. Total interest and fees = total interest + documentation fee.

Illustrative Section 179 tax saving = equipment price × your combined marginal tax rate, assuming the full price is deducted in the year the equipment is placed in service and the deduction is fully usable.

Net cost of ownership over the term = down payment + (monthly payment × months + documentation fee) − expected resale value − tax saving. Payment as share of price per month = monthly payment ÷ equipment price.

Worked examples

Example 1: $85,000 of equipment, 10 percent down, 9.5 percent for 60 months (the defaults)

Down payment = $85,000 × 0.10 = $8,500. Amount financed = $85,000 × 0.90 = $76,500. r = 0.095 ÷ 12 = 0.0079167; (1.0079167)^−60 = 0.6231; 1 − 0.6231 = 0.3769; $76,500 × 0.0079167 = $605.63; $605.63 ÷ 0.3769 = $1,606.64 per month. Total of payments = $1,606.64 × 60 = $96,399. Total interest = $96,399 − $76,500 = $19,899; plus the $350 documentation fee = $20,249 of interest and fees. Section 179 saving at a 30 percent combined rate = $85,000 × 0.30 = $25,500. Net cost of ownership = $8,500 down + ($96,399 + $350) − $20,000 resale − $25,500 tax = $8,500 + $96,749 − $45,500 = $59,749. Payment as share of price = $1,606.64 ÷ $85,000 = 1.89 percent per month. The tool shows $1,606.64, $76,500, $20,249, $25,500, $59,749 and 1.89 percent. Over five years the equipment costs $59,749 net, or about $996 a month, against a $1,607 payment; the tax saving and resale value cover the rest.

Example 2: $150,000 financed in full over 84 months at 12 percent

Down payment 0, so amount financed = $150,000. r = 0.01; (1.01)^−84 = 0.4335; 1 − 0.4335 = 0.5665; $150,000 × 0.01 = $1,500; $1,500 ÷ 0.5665 = $2,647.91 per month. Total of payments = $2,647.91 × 84 = $222,424. Total interest = $72,424; plus a $500 documentation fee = $72,924. Section 179 saving at 24 percent = $150,000 × 0.24 = $36,000. Resale after seven years $35,000. Net cost = $0 + ($222,424 + $500) − $35,000 − $36,000 = $151,924. Payment share = $2,647.91 ÷ $150,000 = 1.77 percent per month. Financing 100 percent over seven years keeps the payment low but puts nearly half the price into interest; the net cost ends up slightly above the price even after the tax saving and resale. If the equipment earns well above $2,648 a month in added gross profit it is still a good purchase, which the ROI on capital calculator tests. If not, a shorter term or a larger down payment is the fix, not a different lender.

Example 3: a $30,000 machine with 20 percent down over 36 months

Down payment = $6,000. Amount financed = $24,000. r = 0.075 ÷ 12 = 0.00625; (1.00625)^−36 = 0.7990; 1 − 0.7990 = 0.2010; $24,000 × 0.00625 = $150; $150 ÷ 0.2010 = $746.55 per month. Total of payments = $26,876. Total interest = $2,876; plus $250 documentation = $3,126. Section 179 saving at 35 percent = $30,000 × 0.35 = $10,500. Resale $12,000. Net cost = $6,000 + ($26,876 + $250) − $12,000 − $10,500 = $10,626. Payment share = $746.55 ÷ $30,000 = 2.49 percent per month. A short term at a modest rate makes interest almost incidental: $2,876 on $24,000 over three years. The net cost of $10,626 over 36 months is about $295 a month for a $30,000 machine, which is the number to compare with renting one or paying someone else to do the work.

Reading the net cost of ownership

The headline payment tells you what the loan takes from cash flow each month; the net cost of ownership tells you what the equipment actually costs over the term once you count the tax saving and what you can sell it for. The two numbers answer different questions. The payment has to clear the bank account every month regardless of tax timing; the net cost is what the decision should rest on. Divide the net cost by the months to get a monthly figure to set against rental, outsourcing or a lease.

  • Resale value is a guess, and it should be a conservative one. Vehicles and general-purpose machinery hold value; custom and technology equipment often does not. Enter zero if you are unsure and let any resale be upside.
  • The tax saving arrives once, in the first year, while the payments continue for the term. A business that is tight on cash gets the benefit as a smaller tax bill or refund months after the purchase.
  • Payment as share of price is a quick comparison across quotes: a payment near 2 percent of price per month over five years means a rate in the low teens; near 1.7 percent over seven years, a similar rate on a longer term.
  • Sanity check: the first payment's interest should be the amount financed × rate ÷ 12. On the defaults that is $605; if the lender's first statement shows far more, the quote included fees you have not entered.

Section 179 and bonus depreciation: what the tax line assumes

Section 179 of the Internal Revenue Code lets a business elect to deduct the cost of qualifying equipment in the year it is placed in service instead of depreciating it over several years. IRS Publication 946 explains the rules, and the election is made on Form 4562. The calculator's tax line multiplies the full price by your marginal rate, which assumes three things: the equipment qualifies, the price is within the annual deduction limit, and the business has enough taxable income to use the deduction. Each can fail.

Conditions behind the Section 179 line
ConditionWhy it mattersIf it fails
Qualifying propertyTangible equipment, vehicles (with limits), off-the-shelf software and certain building improvements qualify; land and most buildings do notDepreciate over the recovery period instead; the saving is spread over years
Annual deduction limitThe IRS sets a maximum Section 179 deduction each year, reduced once total purchases exceed a thresholdExcess may qualify for bonus depreciation or regular depreciation
Business income limitThe deduction cannot exceed the year's taxable business incomeUnused amounts carry forward to later years
Business use above 50 percentRequired for the election, and recapture applies if use later dropsDeduction limited to the business-use share
Placed in service in the tax yearOrdered and paid is not enough; it must be ready and available for useThe deduction moves to the next year

Bonus depreciation is a separate first-year allowance with its own percentage, which has been changed by legislation more than once; your CPA will know the current figure. Financing does not affect either deduction: the full price is deductible in the year of purchase even though you pay for it over five years, which is the main tax argument for buying on a loan rather than leasing. Confirm your own numbers with a CPA before relying on the tax line; the IRS Small Business Tax Center is the starting point.

Loan or lease

An equipment loan makes you the owner from day one, with the tax deductions, the resale value and the obligation to maintain it. A lease keeps ownership with the lessor; payments are usually lower, the lessor often handles maintenance on operating leases, and the deduction is the lease payment rather than Section 179. Finance leases and dollar-buyout leases behave like loans and are usually taxed like them; fair-market-value leases behave like rentals. The equipment lease versus loan calculator runs both side by side on the same equipment.

  • Buy on a loan when the equipment has a long useful life, holds resale value and you can use the Section 179 deduction this year.
  • Lease when the equipment becomes obsolete quickly, when you want maintenance bundled, when cash for a down payment is short, or when the business cannot use a large deduction now.
  • Watch the end-of-term terms on a lease: automatic renewals, return conditions and buyout prices are where leases get expensive.
  • Watch the documentation fee and any blanket lien on a loan: an equipment loan should take a lien on the equipment, not on all business assets.

How equipment lenders underwrite

Equipment financing is the most forgiving credit product because the equipment secures the loan. Lenders care about the asset first: its type, age, resale market and the share of price they are financing. A 10 to 20 percent down payment on hard assets with an active used market gets the best rates; soft costs like installation, software and training are financed reluctantly and at a higher rate, if at all. Then they look at the business: time in business, owner credit (often acceptable from the high 500s because of the collateral), and bank statements for payment capacity. The eligibility checker reflects those lighter thresholds.

The lender files a financing statement against the specific equipment under UCC Article 9, and a purchase-money security interest filed promptly gives it priority over an earlier blanket lien, which is why equipment loans are available even when a bank or funder already has a lien on everything else. Vehicles are titled rather than UCC-filed. Expect a personal guarantee on smaller loans and a requirement to insure the equipment with the lender named as loss payee.

Deciding whether the equipment pays for itself

  1. 1

    Estimate the monthly gross profit the equipment adds

    New capacity, lower labour, fewer outsourced jobs, less downtime. Be specific and conservative; the break-even calculator handles the volume question.

  2. 2

    Compare it with the net monthly cost

    Net cost of ownership ÷ months. On the defaults that is $996 a month. If the equipment adds less gross profit than that, it is a cost, not an investment.

  3. 3

    Check the payment against cash flow

    The tax saving does not help in month two. Run the affordability calculator with the full payment and your existing debt.

  4. 4

    Match the term to the useful life

    A loan that outlives the equipment leaves you paying for scrap. Five years on a machine with a ten-year life is conservative; seven years on a laptop is not.

  5. 5

    Shorten the term if you can

    Example 3's three-year loan pays $2,876 of interest on $24,000; the same amount over seven years would pay more than twice that. If the payment fits, the shorter term always wins on cost.

For large equipment and heavy machinery, the SBA 504 program finances long-lived equipment with a 10-year fixed-rate debenture and a 10 percent contribution, often at lower rates than conventional equipment lenders; the SBA 504 calculator models it. The loan-to-value calculator shows how a lender sees your down payment against the equipment's value.

Questions people ask

What is a typical equipment loan rate?

It depends on the equipment, the down payment, your credit and time in business more than on the lender type. Hard assets with a strong resale market and a solid business get rates near bank term-loan levels; soft assets, start-ups and weak credit pay more. Dealer and manufacturer promotions can be lower still but may come with a higher price. Compare quotes on the same equipment with the same down payment.

How does Section 179 work with a financed purchase?

The deduction is based on the cost of the equipment placed in service in the year, not on how much you have paid for it. Financing the purchase does not reduce the deduction, so you can deduct the full price in year one while paying the loan over five years. Limits, qualifying property rules and the business income cap apply; the calculator's tax line is an illustration to confirm with a CPA.

How much down payment do I need for equipment financing?

Commonly 0 to 20 percent. Zero-down offers exist for strong borrowers and hard assets; 10 percent is a frequent middle; 20 percent or more is asked of newer businesses, weaker credit or equipment with poor resale. A larger down payment lowers the rate and the payment and reduces the chance of owing more than the equipment is worth.

Is an equipment loan better than a lease?

A loan is usually cheaper over the equipment's life when it has a long useful life and resale value and when you can use the first-year deduction. A lease is often better for equipment that becomes obsolete quickly, when you want maintenance included, or when cash for a down payment is tight. The lease versus loan calculator compares both on the same equipment.

What does the equipment loan calculator leave out?

Sales tax on the purchase, delivery and installation, insurance, maintenance and the lender's lien filing fee, all of which add to the cost of ownership. It also assumes the full price qualifies for Section 179 and that your business can use the deduction this year. Add those items to the price or the documentation fee to see their effect on the payment and net cost.

Sources and further reading

Site calculators on the same topic

Related tools and guides

More loan calculators

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Turn the estimate into real offers

One request, several funding partners, side-by-side payback. Nothing is binding until you accept an offer.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

Check equipment financing offers

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.