Skip to content
Alternative Finance

Underwriting · Lenders and brokers

LTV calculator for collateral-backed business loans

This LTV calculator measures a proposed loan against appraised collateral two ways, alone and combined with existing senior liens, applies an advance rate by collateral type to get lendable value, and returns the maximum loan at your policy LTV plus the equity cushion remaining after the loan. It is for lenders and brokers structuring real-estate, equipment, inventory and receivables-backed facilities. The figure to watch is combined LTV: a low LTV on the new loan alone means little when senior liens already consume most of the value.

Combined LTV
68.8%
LTV of proposed loan alone
25.0%
Maximum loan at policy LTV
$250,000
Lendable value after advance rate
$800,000
Equity cushion after loan
$250,000
Advance rate applied
100%

Advance rates discount the appraisal for how collateral sells in a forced sale: real estate near 100 percent of appraisal, equipment on orderly liquidation value, inventory and receivables lower still.

Formula

LTV of proposed loan alone = Proposed loan ÷ Appraised collateral value. Combined LTV = (Proposed loan + Existing senior liens) ÷ Appraised collateral value.

Advance rate by Collateral type: commercial real estate 100% of appraisal, equipment 80% (of orderly liquidation value), inventory 50%, accounts receivable 85%. Lendable value = Appraised collateral value × advance rate.

Maximum loan at policy LTV = max(0, Lendable value × Policy maximum LTV − Existing senior liens).

Equity cushion after loan = Appraised collateral value − Existing senior liens − Proposed loan. Combined LTV passes when it is at or below Policy maximum LTV.

Worked examples

Example 1: default inputs, a second lien on commercial property

Inputs: Appraised collateral value $800,000, Existing senior liens $350,000, Proposed loan $200,000, Policy maximum LTV 75%, Collateral type commercial real estate. The advance rate for real estate is 100 percent, so lendable value = 800,000 × 1.00 = $800,000. LTV of the proposed loan alone = 200,000 ÷ 800,000 = 25.0%. Combined LTV = (200,000 + 350,000) ÷ 800,000 = 550,000 ÷ 800,000 = 68.8%, which is at or below the 75 percent policy and therefore shown in green. Maximum loan at policy LTV = 800,000 × 0.75 − 350,000 = 600,000 − 350,000 = $250,000, so the request of $200,000 leaves $50,000 of unused capacity. Equity cushion after loan = 800,000 − 350,000 − 200,000 = $250,000, meaning the property could sell for 31 percent less than appraisal before the combined debt is impaired, and for 56 percent less before the senior lender is. That last point is the one the second-lien lender should dwell on: in a forced sale the senior lien is paid first, and the $250,000 cushion is all that stands between the junior loan and a loss.

Example 2: equipment at orderly liquidation value

Inputs: appraised value $500,000, senior liens $0, proposed loan $300,000, policy LTV 80%, collateral type equipment. The equipment advance rate is 80 percent, so lendable value = 500,000 × 0.80 = $400,000. LTV of the loan alone = 300,000 ÷ 500,000 = 60.0%, and with no senior liens combined LTV is the same 60.0%, which passes against 80 percent. Maximum loan at policy LTV = 400,000 × 0.80 − 0 = $320,000. Equity cushion = 500,000 − 0 − 300,000 = $200,000. The two-stage haircut is the point of this example: the appraisal is first discounted to $400,000 for how equipment sells in an orderly liquidation, and the policy LTV is then applied to that figure, so the effective maximum is 64 percent of appraisal even though the policy says 80. A lender that applied 80 percent to the $500,000 appraisal would lend $400,000 against collateral likely to realize $400,000 before costs of sale, leaving no cushion at all.

Example 3: a receivables facility

Inputs: eligible receivables $1,200,000, senior liens $0, proposed loan $500,000, policy LTV 85%, collateral type accounts receivable. The receivables advance rate is 85 percent: lendable value = 1,200,000 × 0.85 = $1,020,000. LTV alone and combined = 500,000 ÷ 1,200,000 = 41.7%. Maximum loan at policy LTV = 1,020,000 × 0.85 = $867,000. Equity cushion = 1,200,000 − 500,000 = $700,000. Receivables are advanced at high rates because they convert to cash on their own schedule, but the 85 percent policy applied on top of the 85 percent advance rate gives an effective 72 percent of face, which is in the range asset-based lenders use for eligible receivables after excluding past-due, concentrated and related-party invoices. The $1,200,000 entered must already be the eligible pool; the tool does not perform the aging and concentration exclusions that an asset-based lender's borrowing base certificate would.

LTV, combined LTV and why the second matters more

Loan-to-value is the simplest measure of collateral coverage: the loan divided by what the collateral is worth. It is the first number a credit committee asks for on any secured facility, and the Wikipedia entry on loan-to-value gives the general background. But a single LTV only describes one loan. Where the collateral already secures another lender, the junior lender's real exposure is described by combined LTV, which adds the senior liens to the new loan before dividing. In the default example the new loan is 25 percent of value on its own and 69 percent combined; the second figure is the one that determines whether a forced sale repays everyone.

Priority between lenders on the same collateral is governed by recording order for real estate and by Article 9 of the Uniform Commercial Code for personal property such as equipment, inventory and receivables; the UCC Article 9 text sets out the perfection and priority rules. A junior lender is paid only from what remains after the senior lender is made whole, including that lender's costs of enforcement, which is why an LTV calculator that ignores senior liens overstates the junior position's safety. A title search for real estate and a UCC search for other assets are prerequisites for the senior liens input.

Advance rates applied by collateral type
CollateralAdvance rate in the toolWhy
Commercial real estate100% of appraisalAppraisals already estimate market value; policy LTV provides the cushion
Equipment80% of appraisalProxy for orderly liquidation value, which runs below fair market value
Inventory50%Finished goods sell at steep discounts in liquidation; raw materials and work in progress lower still
Accounts receivable85%Eligible invoices convert to cash but some will dispute, dilute or default

Advance rates: what the appraisal is worth to a lender

An appraisal estimates what a willing buyer pays a willing seller with time to market. A lender that forecloses is not a willing seller with time, so the collateral value that matters is what it would bring in an orderly liquidation, or in the worst case a forced one. Advance rates discount the appraisal to that realization. Real estate is advanced at or near the full appraisal because the policy LTV, commonly 65 to 80 percent for commercial property, already builds in the discount. Equipment appraisals often come in three values, fair market, orderly liquidation and forced liquidation; lenders advance against orderly liquidation value, which the tool approximates at 80 percent of the value entered. Inventory and receivables are discounted most heavily because their value depends on the business continuing to operate.

The tool's rates are common starting points, not a standard. Supervisory guidance for banks, including the OCC's Comptroller's Handbook and the FDIC's examination materials, discusses collateral valuation and the supervisory loan-to-value limits that apply to real estate lending by insured institutions; non-bank lenders are not bound by those limits but routinely adopt similar ranges. For equipment, specialized collateral such as restaurant fixtures or custom machinery sells at a fraction of general-purpose collateral such as trucks and construction equipment, so a single 80 percent rate is generous for the former and conservative for the latter.

Setting the policy LTV

The policy maximum LTV is the cushion a lender requires between its exposure and the collateral's lendable value. Commercial real estate policies commonly fall between 65 and 80 percent depending on property type, with owner-occupied buildings at the higher end and special-purpose or land at the lower. Equipment lenders often apply 70 to 90 percent to orderly liquidation value. Inventory and receivable facilities are usually expressed as advance rates in a borrowing base rather than as an LTV, with 80 to 90 percent on eligible receivables and 30 to 60 percent on eligible inventory. SBA 504 loans, which finance real estate and equipment through a bank first lien and a certified development company second lien, are structured around a 10 percent borrower contribution for standard projects, and the SBA 504 program page describes the structure.

  • Lower the policy LTV for special-purpose property, older equipment, perishable or fashion inventory, and receivables concentrated in a few customers.
  • Lower it when the appraisal is more than a year old, was commissioned by the borrower, or is a broker opinion rather than a certified appraisal.
  • Raise it only with a guaranty, a cash reserve, or cross-collateral that the tool does not model.
  • Tie the policy LTV to coverage: a loan within LTV but failing debt service coverage is a loan you will have to foreclose on to recover, and the commercial real estate DSCR calculator checks that side.

Using the maximum loan and the equity cushion

The maximum loan at policy LTV is the amount the collateral supports; it says nothing about whether cash flow can service it. Pair the figure with a coverage test, through the business loan underwriting calculator for operating businesses or the commercial mortgage calculator for income property, and lend to the lower of the two. For a request above the collateral maximum, the options are additional collateral, a larger equity contribution from the borrower, a senior lender's agreement to subordinate or be paid down, or an unsecured piece priced for the exposure, which the secured versus unsecured loan calculator compares.

The equity cushion is the plain-dollar version of the same information and is the better number to put in a credit memo, because it states how far value can fall before the loan is impaired. Divide the cushion by the appraised value to express it as the percentage decline the loan can absorb. For a junior lien, also compute the cushion above the senior lien alone, since that is the margin before the junior position begins to lose; in the default example it is $450,000 of value above a $350,000 senior lien, of which the new loan takes $200,000.

Documentation, taxes and enforcement

Collateral value is only useful if the lien is enforceable. Real estate requires a recorded mortgage or deed of trust, a title policy and, for income property, an assignment of rents. Personal property requires a security agreement and a UCC-1 financing statement filed in the correct state, with a search confirming no earlier filings cover the same collateral; purchase-money security interests in equipment have special priority if perfected within the statutory window. Receivables and inventory facilities also need periodic borrowing base reporting and the right to verify receivables with the account debtors.

For equipment, the tax treatment of the asset affects the borrower's cash flow and therefore coverage, though not the LTV: Section 179 expensing and bonus depreciation, described in IRS Publication 946, let a business deduct much of the purchase price in the year of acquisition, which lowers taxes and raises after-tax cash available for debt service. The equipment financing calculator and the equipment lease versus loan calculator model the payment side. When a secured loan does default, the realized recovery after costs of sale and time is what sets loss given default; the loan recovery rate calculator converts gross recoveries into the net present-value figure that reserve calculations need, and comparing it with the advance rate used at origination is the best test of whether the advance rate was right.

Questions people ask

What is a good LTV for a commercial loan?

Commercial real estate lenders commonly cap loan-to-value between 65 and 80 percent of appraised value, with owner-occupied property at the higher end. Equipment lenders typically advance 70 to 90 percent of orderly liquidation value, and receivables lenders 80 to 90 percent of eligible invoices. The LTV calculator applies an advance rate by collateral type before the policy LTV, so the effective maximum against appraisal is lower than the policy number.

What is the difference between LTV and combined LTV?

LTV measures one loan against the collateral value. Combined LTV adds every lien ahead of or alongside it. A second-lien lender's risk is described by the combined figure, because the senior lender is repaid first in any sale. In the default example the new loan is 25 percent LTV alone but 68.8 percent combined, and the combined figure is the one tested against policy.

Why does the calculator discount equipment to 80 percent before applying the policy LTV?

Because equipment appraisals state fair market value, while a lender that has to sell repossessed equipment realizes orderly liquidation value, which is typically lower. The 80 percent advance rate approximates that gap. Applying the policy LTV to the discounted figure keeps a genuine cushion; applying it to the full appraisal often leaves none after costs of sale.

How do senior liens affect the maximum loan?

They are subtracted from lendable value times the policy LTV. If a $800,000 property carries a $350,000 first mortgage and the policy LTV is 75 percent, the maximum second lien is 600,000 − 350,000 = $250,000. Confirm senior balances from payoff statements rather than the original loan amounts, since amortization reduces them and a line of credit may have grown.

Does passing the LTV test mean the loan is safe?

No. LTV measures what a lender might recover if the loan fails, not whether it will fail. A loan at 60 percent LTV on a business that cannot cover the payments will still default and the lender will still bear foreclosure costs, time and a distressed sale. Pair the LTV result with a coverage test and lend to the lower of the two limits.

Sources and further reading

Related tools and guides

More underwriting

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Turn the estimate into real offers

One request, several funding partners, side-by-side payback. Nothing is binding until you accept an offer.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

See what you may qualify for

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.