Skip to content
Alternative Finance

Underwriting · Brokers and underwriters

Average monthly deposits calculator

This average monthly deposits calculator takes three or four months of gross bank deposits and the non-sales credits in each month, and returns the true average that funders size advances on, the recency-weighted average that gives later months more influence, the lowest true month, and exclusions as a share of gross. It is for brokers preparing a submission and underwriters checking one. The number to watch is the exclusion share: above 15 percent, the gross figure on the application is materially overstated.

Average true monthly deposits
$67,833
Average gross deposits
$74,667
Recency-weighted average
$66,000
Lowest true month
$57,000
Exclusions as share of gross
9.2%
Annualized true deposits
$814,000

Funders size advances on true deposits. Counting a loan deposit or an owner transfer as revenue is the most common reason an offer is cut at the final review.

True deposits by month
$68,000M1$78,500M2$57,000M3

Your funding estimate

$67,833

Estimated amount from your inputs. An example calculation, not an offer from any lender.

Compare funding options

Formula

True deposits for each month = Gross deposits − Transfers, loans and refunds for that month; months with zero gross deposits are ignored.

Average true monthly deposits = sum of true deposits ÷ number of months entered. Average gross deposits = sum of gross ÷ number of months.

Recency-weighted average = (M1 true × 1 + M2 true × 2 + M3 true × 3 [+ M4 true × 4]) ÷ (1 + 2 + 3 [+ 4]).

Exclusions as share of gross = sum of exclusions ÷ sum of gross deposits. Annualized true deposits = Average true monthly deposits × 12.

Worked examples

Example 1: three default months

Inputs: Month 1 gross deposits $74,000 with $6,000 of transfers, loans and refunds; Month 2 gross $81,000 with $2,500 excluded; Month 3 gross $69,000 with $12,000 excluded; Month 4 left at zero so it is ignored. True deposits: M1 = 74,000 − 6,000 = $68,000; M2 = 81,000 − 2,500 = $78,500; M3 = 69,000 − 12,000 = $57,000. Average gross = (74,000 + 81,000 + 69,000) ÷ 3 = 224,000 ÷ 3 = $74,667. Average true = (68,000 + 78,500 + 57,000) ÷ 3 = 203,500 ÷ 3 = $67,833. Recency-weighted = (68,000 × 1 + 78,500 × 2 + 57,000 × 3) ÷ 6 = (68,000 + 157,000 + 171,000) ÷ 6 = 396,000 ÷ 6 = $66,000. Lowest true month = $57,000. Exclusions = (6,000 + 2,500 + 12,000) ÷ 224,000 = 20,500 ÷ 224,000 = 9.2%. Annualized = 67,833 × 12 = $814,000. The gross average overstates sizing revenue by about $6,800 a month; the weighted figure is lower still because the weakest month is the most recent, which is why a funder would likely size at $66,000 rather than $74,667.

Example 2: a loan deposit hiding in month two

Inputs: M1 gross $50,000, exclusions $0; M2 gross $48,000, exclusions $25,000; M3 gross $55,000, exclusions $1,500; M4 gross $60,000, exclusions $2,000. True: M1 $50,000; M2 = 48,000 − 25,000 = $23,000; M3 = 55,000 − 1,500 = $53,500; M4 = 60,000 − 2,000 = $58,000. Average gross = 213,000 ÷ 4 = $53,250. Average true = 184,500 ÷ 4 = $46,125. Weighted = (50,000 × 1 + 23,000 × 2 + 53,500 × 3 + 58,000 × 4) ÷ 10 = (50,000 + 46,000 + 160,500 + 232,000) ÷ 10 = 488,500 ÷ 10 = $48,850. Lowest true month = $23,000. Exclusions = 28,500 ÷ 213,000 = 13.4%. Annualized = $553,500. Month two is the interesting one: $25,000 of its $48,000 was an advance landing in the account, so only $23,000 was sales. Without the exclusion the month looks ordinary; with it, the business had a weak month that it covered by borrowing. The weighted average of $48,850 is above the simple average because the last two months were the strongest, which supports a slightly larger sizing than the plain mean, provided the existing advance's debits are counted in the debt burden.

Example 3: a gently declining account

Inputs: M1 gross $30,000 with $4,000 excluded; M2 gross $28,000 with $3,000 excluded; M3 gross $26,000 with $2,000 excluded. True: $26,000, $25,000, $24,000. Average gross = 84,000 ÷ 3 = $28,000. Average true = 75,000 ÷ 3 = $25,000. Weighted = (26,000 × 1 + 25,000 × 2 + 24,000 × 3) ÷ 6 = (26,000 + 50,000 + 72,000) ÷ 6 = 148,000 ÷ 6 = $24,667. Lowest = $24,000. Exclusions = 9,000 ÷ 84,000 = 10.7%. Annualized = $300,000. All three averages are within $1,000 of each other, so the sizing base is not in dispute. What the bars show is a steady decline of about $1,000 a month in true deposits. For a business this size, a funder would want to know why before offering more than a fraction of a month's deposits, and would use the lowest month, $24,000, rather than the average as the base. The tool's note that funders size on true deposits applies with particular force when the direction is down.

Why gross deposits are the wrong number

A bank statement's total credits line counts everything that entered the account: customer payments, but also transfers from the owner's savings or another business account, proceeds of a loan or advance, refunds from suppliers, returned items re-presented, insurance claims, tax refunds and the occasional capital contribution. None of those are revenue, and none will recur in the way a funder needs deposits to recur to collect a daily debit. An average monthly deposits calculator exists to remove them. The industry term for the result is true deposits, and it is the base on which advance offers are sized, typically as a multiple between roughly 0.5 and 1.5 times the monthly figure depending on the file.

The exclusion share is the quality check. In the default example, exclusions are 9.2 percent of gross, which is ordinary; most operating accounts carry some transfers. Above 15 percent, the tool flags the share because at that level the application's gross figure is materially misleading and the underwriter should expect a cut at final review. Above 25 to 30 percent, the account is being used as a conduit rather than an operating account and the deposits may not be a reliable proxy for sales at all. The business revenue verification tool adds card processing and tax return cross-checks when that happens.

  • Transfers from other accounts of the same owner or business, including savings sweeps.
  • Proceeds of loans, advances, lines of credit and equipment financing.
  • Refunds, chargebacks reversed in the merchant's favour and returned deposits re-presented.
  • Owner capital contributions, insurance payouts, tax refunds and asset sales.
  • Large one-time customer payments that will not recur, which many funders also exclude or cap.

Simple average, weighted average and lowest month

Three figures are reported because funders use all three. The simple average of true deposits is the default sizing base and the number most offers quote. The recency-weighted average multiplies each month's true deposits by its position, so with three months the latest month counts three times as much as the first; it moves the base toward the current run-rate, up for a growing business and down for a shrinking one. The lowest true month is the conservative base used for weaker files and for setting the daily debit, because the debit must clear in the weakest month, not the average one.

The gap between the three tells you about the shape of the deposit line. When the weighted average is well above the simple average, deposits are rising and the funder can size closer to the recent months. When it is below, as in the default example, the most recent month was weak, and a cautious underwriter will ask whether that is a seasonal dip or the start of a decline. When the lowest month is far below both averages, the business is lumpy and the debit should be sized to that month. The bank statement cash flow analyzer measures that lumpiness formally as volatility and also reports the trend across all months.

How funders use the true deposit figure

The first use is sizing. An advance is commonly offered as a multiple of true monthly deposits, and the tool's estimate card uses the average true figure for that purpose. The maximum funding amount calculator combines the deposit multiple with two further limits, daily debit capacity and EBITDA coverage, and reports which one binds. The second use is the deposit trend input in scoring models such as the merchant risk score calculator, which should be fed with true rather than gross figures or an advance landing in the latest month will look like growth. The third use is setting the daily or weekly payment, where the lowest true month is the right base because it is the month in which the debit is most likely to bounce.

Brokers benefit from running the calculation before submission rather than after. Most funders recompute true deposits as the first step in underwriting, and an offer sized on gross deposits that is then cut at final review damages the broker's relationship with the merchant and the funder alike. The submission readiness checker includes this step, and the guide to how brokers get paid explains why commissions calculated on a pre-cut offer rarely survive.

Which figure to use for what
PurposeFigureReason
Advance sizingAverage true monthly depositsStandard market base for deposit multiples
Growing or shrinking businessRecency-weighted averageReflects the current run-rate
Setting the daily debitLowest true monthThe payment must clear in the weakest month
Risk score trend inputTrue deposits month by monthRemoves loan proceeds that mimic growth
Comparing with tax returnAnnualized true depositsSame basis as gross receipts on the return

Reading the statements to find the exclusions

Go through each month's credits line by line. Transfers are usually labelled as such by the bank and show a counterparty account; proceeds of financing arrive as ACH credits from a lender or funder and are often round numbers; refunds reference an original debit. Where the description is ambiguous, look for a matching debit of the same amount within a few days, which indicates a round trip rather than a sale. Card settlements are sales and stay in. Zelle, Venmo and similar peer-to-peer credits are sales for some businesses and owner transfers for others, so ask. The documents needed for business funding guide lists what to request so the full picture is available before the calculation.

Pay particular attention to financing credits, because each one indicates an obligation that will debit the account going forward. A $25,000 credit from a funder in month two, as in the second example, means a daily or weekly payment began shortly afterward, and that payment must be entered as an existing debit in the debt burden calculator. Financing statements under Article 9 of the UCC are public and a search confirms what the credits suggest; the UCC Article 9 text describes the filing system. Undisclosed positions found this way are the single most common reason a file moves from approve to decline.

Deposits, revenue and the tax return

True deposits approximate cash revenue, not accounting revenue. A business that invoices on 30-day terms deposits last month's sales this month; a business that collects deposits from customers in advance shows cash before it earns it. Over several months the differences wash out, which is one reason to use more than three months when a business has long collection cycles. The IRS explains cash and accrual accounting methods in Publication 538; a business filing on the accrual basis can legitimately show gross receipts that differ from deposits over any short window.

The annualized true deposit figure gives a direct comparison with gross receipts on the last return. The two will rarely match exactly, but a gap beyond 20 to 30 percent in either direction needs an explanation: growth, a lost customer, a second account, or a return that understates receipts. The Census Bureau's Annual Business Survey provides context on the size distribution of U.S. firms if you need to judge whether a claimed revenue figure is plausible for the business type and headcount in front of you.

When true deposits come in well below what the application stated, the correct response is a smaller offer rather than a decline, unless the exclusion pattern suggests the account is not an operating account at all. Explain the calculation to the merchant; most accept a figure derived from their own statements, and a broker who shows the work keeps the deal. For the funder, sizing on true deposits is also a matter of disclosure accuracy in states such as California, New York and Virginia whose commercial financing disclosure laws require stated payment amounts and cost figures that depend on the funded amount.

Questions people ask

What counts as a true deposit?

A credit to the operating account that represents a customer paying for goods or services: card settlements, ACH and wire payments from customers, cheque deposits and cash deposits from sales. Everything else, including transfers between the owner's accounts, loan and advance proceeds, refunds, insurance payouts and capital contributions, is excluded. The average monthly deposits calculator subtracts those exclusions month by month.

How many months do funders average?

Three months is the common minimum for an advance and the default in this tool; many funders ask for four to six and seasonal businesses for twelve. More months smooth out lumpy collections and reveal trend. Use the optional fourth month when you have it, and run the bank statement cash flow analyzer for longer histories.

Why is the recency-weighted average different from the simple average?

The weighted figure multiplies each month's true deposits by its position, so the most recent month has the most influence. If deposits are rising it sits above the simple average; if the latest month was weak, as in the default example, it sits below. Funders use it to size closer to the current run-rate rather than a historical mean.

What exclusion share is too high?

The tool flags exclusions above 15 percent of gross deposits. At that level the gross figure on an application overstates sizing revenue enough that most funders will cut the offer at final review. Above 25 to 30 percent the account is behaving more like a conduit than an operating account, and card processing and tax return cross-checks become essential.

Do I exclude large one-off customer payments?

They are genuine revenue, so they are not transfers, but many funders cap or exclude payments that will clearly not recur, such as a single contract settlement several times the usual monthly total. The conservative approach is to run the calculator both ways and size on the lower figure, noting the one-off in the file so the decision is explainable.

Sources and further reading

Related tools and guides

More underwriting

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Turn the estimate into real offers

One request, several funding partners, side-by-side payback. Nothing is binding until you accept an offer.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

See what you may qualify for

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.