Skip to content
Alternative Finance

Underwriting · Underwriters and brokers

Business debt burden calculator

This business debt burden calculator adds every financing obligation a business carries, converting daily debits at 21 business days a month and weekly debits at 52 ÷ 12 weeks, and reports the total as a share of monthly deposits and of gross profit. It then shows the room left under your policy cap in monthly and daily terms. It is for underwriters and brokers checking whether a file can take another position. Watch the gross profit share: a burden that looks modest against deposits can consume most of a thin-margin business's profit.

Total monthly debt burden
$29,950
Share of deposits
25.0%
Share of gross profit
71%
Room under policy cap (monthly)
-$11,950
Room as a daily debit
-$569.05
Daily-equivalent total burden
$1,426.19

Measure burden against gross profit as well as deposits: a 12 percent deposit share is light for a 60 percent margin consultancy and crushing for a 15 percent margin fuel retailer.

Monthly burden by frequency
$19,950Daily debits$5,200Weekly debits$4,800Monthly payments

Formula

Total monthly debt burden = Daily debits × 21 + Weekly debits × (52 ÷ 12) + Monthly loan, lease and card payments.

Share of deposits = Total monthly debt burden ÷ Monthly deposits. Gross profit = Monthly deposits × Gross margin; Share of gross profit = Total monthly debt burden ÷ Gross profit.

Room under policy cap (monthly) = Monthly deposits × Policy cap − Total monthly debt burden; Room as a daily debit = that figure ÷ 21.

Daily-equivalent total burden = Total monthly debt burden ÷ 21.

Worked examples

Example 1: the default file is already over the cap

Inputs: Monthly deposits $120,000, Gross margin 35%, Daily debits (all positions) $950, Weekly debits $1,200, Monthly loan, lease and card payments $4,800, Policy cap 15%. Daily debits to monthly: 950 × 21 = $19,950. Weekly to monthly: 1,200 × 52 ÷ 12 = 1,200 × 4.333 = $5,200. Monthly payments: $4,800. Total monthly debt burden = 19,950 + 5,200 + 4,800 = $29,950. Share of deposits = 29,950 ÷ 120,000 = 24.96%, shown as 25.0%, well above the 15 percent cap. Gross profit = 120,000 × 0.35 = $42,000; share of gross profit = 29,950 ÷ 42,000 = 71%, flagged because it exceeds half. Room under cap = 120,000 × 0.15 − 29,950 = 18,000 − 29,950 = −$11,950 a month, which is −11,950 ÷ 21 = −$569.05 as a daily debit. Daily-equivalent total burden = 29,950 ÷ 21 = $1,426.19. This business sends out more than $1,400 every business day against deposits of about $5,700 a day, and seven dollars of every ten it earns in gross profit go to financing. A new position here is a stack onto an already overloaded account.

Example 2: a thin-margin retailer

Inputs: deposits $60,000, gross margin 15%, daily debits $500, weekly $0, monthly payments $2,200, cap 12%. Daily to monthly: 500 × 21 = $10,500. Weekly: 0. Total = 10,500 + 0 + 2,200 = $12,700. Share of deposits = 12,700 ÷ 60,000 = 21.2%. Gross profit = 60,000 × 0.15 = $9,000; share of gross profit = 12,700 ÷ 9,000 = 141%. Room = 60,000 × 0.12 − 12,700 = 7,200 − 12,700 = −$5,500 a month, or −$261.90 a day. Daily-equivalent burden = $604.76. The deposit share, 21 percent, is lower than the default example's 25 percent, but the gross profit share is the figure that matters: the business pays out $1.41 in financing for every dollar of gross profit it generates. That is only possible for a short time, funded by the balance, by supplier credit or by the next advance. For a fuel station, grocer or distributor with margins in this range, a 12 percent deposit cap is itself too generous; many funders use 8 to 10 percent for such trades.

Example 3: a consultancy with room to spare

Inputs: deposits $250,000, gross margin 60%, daily $0, weekly $3,500, monthly payments $9,000, cap 20%. Weekly to monthly: 3,500 × 4.333 = $15,166.67. Total = 0 + 15,166.67 + 9,000 = $24,167. Share of deposits = 24,167 ÷ 250,000 = 9.7%. Gross profit = 250,000 × 0.60 = $150,000; share of gross profit = 24,167 ÷ 150,000 = 16%. Room = 250,000 × 0.20 − 24,167 = 50,000 − 24,167 = $25,833 a month, or 25,833 ÷ 21 = $1,230.16 a day. Daily-equivalent burden = $1,150.79. Here the policy cap of 20 percent is comfortably above the current burden, and gross profit covers financing six times over. The account could carry another $1,230 a day, which at 160 business days and a 1.3 factor supports roughly $150,000 of new funding before the deposit multiple or coverage limits are checked. Whether it should is a question of use of proceeds; the burden analysis says only that the cash is there.

Why every obligation has to be converted to one frequency

Small businesses in the alternative-finance market carry debt at three frequencies at once: daily ACH debits for advances, weekly debits for some advances and revenue-based products, and monthly payments for term loans, equipment leases, vehicle notes and business credit cards. The application form asks for monthly payments, so the daily and weekly obligations, usually the largest, are routinely left off. A business debt burden calculator fixes that by normalizing everything to a month. The conversion factors are the market's conventions: 21 business days a month for daily debits, and 52 ÷ 12, or about 4.33, weeks a month for weekly ones. Using 4 weeks a month understates weekly debt by 8 percent, which on a $3,500 weekly debit is $1,167 a month.

The daily-equivalent total burden runs the conversion the other way and is the figure a daily-debit funder should compare with the business's daily deposits. In the default example the business deposits about $5,714 a business day and sends out $1,426, so a quarter of every day's inflow is spoken for before payroll, rent and suppliers. The tool's bars chart splits the burden by frequency; when daily debits dominate, as there, the business is being financed mostly by advances, and the MCA stacking calculator will show how many positions sit behind that figure.

  • Daily debits: every advance or loan that pulls on business days, summed across positions.
  • Weekly debits: weekly-remit advances, revenue-based financing with weekly settlement, some equipment and vehicle notes.
  • Monthly payments: term loans, SBA loans, leases, lines of credit at the current balance, and the minimum payments on business credit cards.
  • Not included: rent, payroll, taxes and supplier terms; those are operating costs, and the gross profit measure is where they are implicitly accounted for.

Deposits versus gross profit: two denominators, two questions

The share of deposits answers the funder's collection question: how much of the cash flowing through the account is already committed to other creditors, and how much can be committed to me? The share of gross profit answers the survival question: can this business keep operating while paying all of us? A 15 percent deposit share is sustainable for a consultancy with a 60 percent margin because financing takes a quarter of its gross profit; it is fatal for a fuel retailer with a 12 percent margin, because the same share would exceed the whole gross profit. The tool flags a gross profit share above 50 percent because beyond that point financing is the largest single claim on the business's earnings, ahead of the owner.

Gross margin is therefore the input that most changes the interpretation. Use the figure from the last tax return or year-to-date financials, cost of goods sold against revenue, rather than an estimate. Typical ranges by trade are wide: distribution and fuel in the low teens, restaurants and retail in the 25 to 40 percent range for gross margin before labour, contractors 20 to 35 percent, professional and medical services 50 percent and above. The EBITDA and cash flow underwriting guide explains how to get from gross profit to the EBITDA figure used in coverage ratios, which is the next step when a file passes the burden test.

Setting the policy cap and using the room figure

The cap is the share of deposits a funder allows all financing debits combined to take. Caps between 10 and 20 percent are commonly used; the margin discussion above explains why one number cannot fit every trade. A practical approach is a sliding cap: lower for low-margin industries, higher for high-margin ones, and lower again when deposit volatility is high. The room under the cap is then the monthly amount, and the daily figure beside it is the largest new daily debit that keeps the file within policy. Feed that daily figure into the maximum funding amount calculator as the existing daily debit, or directly into the daily ACH payment calculator to see what advance it supports at a given factor and term.

Negative room means the business is already past your cap. Three responses are common. Decline, which is appropriate when the burden is rising or the gross profit share is above 100 percent. Consolidate, where one funder pays off the existing positions and replaces several daily debits with one smaller payment over a longer term; the MCA consolidation calculator shows whether the combined daily payment actually falls. Or wait, since advances amortize quickly and a position that ends in six weeks frees its daily debit; the MCA payoff balance calculator gives the remaining schedule.

Reading the two shares together
Share of depositsShare of gross profitReading
Under capUnder 30%Capacity for a new position; check coverage and use of proceeds
Under cap30% to 50%Capacity exists but financing is a major cost; size conservatively
Over capUnder 50%High-margin business over a deposit cap; consider a term product instead of a daily one
Over capOver 50%Over-leveraged; consolidate or decline
AnyOver 100%Financing exceeds gross profit; the business is being funded by its creditors

Finding the obligations the application left out

The statements are the primary source. Read three months of debits and list every recurring pull by payee, amount and frequency; funders' names are usually recognizable, and the amounts are identical day to day. A UCC search under Article 9 shows financing statements filed by secured lenders and most advance companies; the UCC Article 9 text explains the filing and priority rules. The owner's personal credit report shows personally guaranteed term loans and business credit cards reported in the owner's name, and the business credit file shows the rest. Equipment leases are often missing from all three and turn up only on the statements or the tax return's depreciation schedule, which is why IRS Publication 946 on depreciation is a useful companion when reviewing a return for financed assets.

Ask the owner directly as well, with the list in hand. An owner who volunteers a position the statements did not show, because it debits a second account, has told you something useful about both the debt and themselves. One who denies a position that the statements clearly show has told you something else. The documents needed for business funding guide covers what to request so that the full obligation list can be assembled before the burden is computed.

Debt burden, disclosure and the regulatory backdrop

Business credit is exempt from the Truth in Lending Act's consumer disclosures under Regulation Z, whose scope provision the CFPB publishes in its Regulation Z text, which is why a daily debit has no federally mandated APR disclosure. A growing group of states has filled that gap for commercial financing: California and New York were first, and Utah, Virginia, Georgia, Florida, Connecticut and Kansas have followed with their own disclosure or registration regimes. The California DFPI, New York DFS, Utah Department of Financial Institutions and Virginia State Corporation Commission publish their rules. Several require the provider to state the payment amount and frequency, which is exactly what this tool normalizes, so the burden analysis and the disclosure should agree.

For the business owner on the other side of the table, the burden figure is also the most honest statement of what the financing costs in cash terms. A broker who can show a merchant that their existing positions take 25 percent of deposits and 71 percent of gross profit, as in the default example, has a stronger case for consolidation than any rate comparison. The how to compare funding offers guide covers the borrower's side of that conversation, and the business debt-to-income ratio calculator gives the same measure in the format banks and SBA lenders use.

Questions people ask

What is an acceptable debt burden for a small business?

Most daily-debit funders cap total financing debits at 10 to 20 percent of monthly deposits, with the lower end for thin-margin trades. Against gross profit, a burden under 30 percent leaves room for the business to operate and the owner to be paid; above 50 percent financing becomes the largest claim on earnings. The business debt burden calculator reports both shares so you can apply whichever your policy uses.

Why convert daily debits at 21 days and weekly at 4.33 weeks?

Daily advances pull on business days, of which there are about 252 a year, or 21 a month. Weekly debits occur 52 times a year, which is 4.33 a month. Using calendar days or four weeks a month understates the obligation; on a $1,200 weekly debit the difference between 4 and 4.33 weeks is $400 a month, which can tip a file over a policy cap.

Should credit card payments be included?

Yes, at the minimum monthly payment or the amount the owner actually pays if it is consistently higher. Business credit cards are financing, and the card balance often grows when daily debits squeeze cash. Include lines of credit at the payment due on the current balance, and leases and vehicle notes at their monthly amount.

What does negative room under the policy cap mean?

That existing obligations already take more than the cap's share of deposits. A new position would push the business further past your own limit. The options are to decline, to consolidate the existing debt into one lower payment, or to wait for a short-term position to pay off and re-run the calculation with the remaining obligations.

How does debt burden differ from debt service coverage?

Debt burden measures financing payments against deposits and gross profit, the figures available from bank statements and a margin estimate. Debt service coverage measures them against EBITDA, which requires financial statements or a tax return. Burden is the first screen for cash-flow products; coverage is the standard for term loans. Both should be checked when a file is large enough to justify the extra work.

Sources and further reading

Related tools and guides

More underwriting

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Turn the estimate into real offers

One request, several funding partners, side-by-side payback. Nothing is binding until you accept an offer.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

See what you may qualify for

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.