Skip to content
Alternative Finance

Underwriting · Underwriters and brokers

Maximum business funding calculator

This maximum business funding calculator computes three independent ceilings on a funding amount, the policy multiple of true monthly deposits, the amount a new daily debit can repay within the debit cap over the term, and the amount EBITDA can cover at your minimum coverage, then returns the lowest as the maximum and names the binding limit. It is for underwriters and brokers sizing advances and short-term loans. The number to watch is the binding limit: when coverage binds far below the deposit multiple, the deposits are real but the profit is not.

Maximum funding
$31,453
Binding limit
Coverage
By deposit multiple
$100,000
By debit capacity
$50,989
By EBITDA coverage
$31,453
Daily debit at maximum
$255.56

The lowest of the three limits binds. Deposit multiples are the market's rule of thumb; debit capacity and coverage are what keep the merchant alive long enough to pay.

Three limits
$100,000Multiple$50,989Capacity$31,453Coverage

Your funding estimate

$31,453

Estimated amount from your inputs. An example calculation, not an offer from any lender.

Compare funding options

Formula

By deposit multiple = True monthly deposits × Policy multiple of monthly deposits.

Daily room = (True monthly deposits × Max debits as share of deposits) ÷ 21 − Existing daily debits. By debit capacity = max(0, Daily room) × Term in business days ÷ Factor or cost multiple.

Coverage room (monthly) = Monthly EBITDA ÷ Minimum coverage − Existing daily debits × 21. By EBITDA coverage = max(0, Coverage room) ÷ 21 × Term in business days ÷ Factor.

Maximum funding = the lowest of the three; Daily debit at maximum = Maximum funding × Factor ÷ Term in business days.

Worked examples

Example 1: default inputs, coverage binds at $31,453

Inputs: True monthly deposits $100,000, Policy multiple 1, Existing daily debits $300, Max debits as share of deposits 15%, Factor 1.3, Term 160 business days, Monthly EBITDA $14,000, Minimum coverage 1.2. Limit one, deposit multiple: 100,000 × 1 = $100,000. Limit two, debit capacity: the cap allows 100,000 × 0.15 = $15,000 a month, or 15,000 ÷ 21 = $714.29 a day; less the existing $300 leaves daily room of $414.29. Over 160 days that collects 414.29 × 160 = $66,286 of payback, which at a 1.3 factor funds 66,286 ÷ 1.3 = $50,989. Limit three, coverage: EBITDA can support 14,000 ÷ 1.2 = $11,666.67 of monthly debits at 1.2x cover; existing debits already use 300 × 21 = $6,300, leaving $5,366.67 a month, or 5,366.67 ÷ 21 = $255.56 a day; over 160 days that is $40,889 of payback, or 40,889 ÷ 1.3 = $31,453 of funding. The lowest is coverage, so Maximum funding = $31,453, Binding limit = Coverage, and the daily debit at maximum = 31,453 × 1.3 ÷ 160 = $255.56. The deposits would support three times as much; the profit would not.

Example 2: a small, unleveraged file

Inputs: deposits $50,000, multiple 1.2, existing daily debits $0, cap 12%, factor 1.35, term 120 days, EBITDA $5,000, minimum coverage 1.25. Deposit multiple: 50,000 × 1.2 = $60,000. Debit capacity: 50,000 × 0.12 = 6,000 ÷ 21 = $285.71 a day with nothing existing; × 120 = $34,286 of payback; ÷ 1.35 = $25,397. Coverage: 5,000 ÷ 1.25 = $4,000 a month, nothing existing; ÷ 21 = $190.48 a day; × 120 = $22,857; ÷ 1.35 = $16,931. Maximum = $16,931, binding limit Coverage, daily debit 16,931 × 1.35 ÷ 120 = $190.48. Note the gap between the deposit multiple and the actual maximum: a broker quoting 1.2 times deposits would promise $60,000 to a business whose profit supports a quarter of that. The 10 percent EBITDA margin is the constraint, and no change in cap or term fixes it; only a lower factor or a longer term raises the coverage limit, and both reduce the funder's return.

Example 3: a larger business with an existing position

Inputs: deposits $200,000, multiple 0.8, existing daily debits $900, cap 18%, factor 1.25, term 200 days, EBITDA $40,000, minimum coverage 1.5. Deposit multiple: 200,000 × 0.8 = $160,000. Debit capacity: 200,000 × 0.18 = 36,000 ÷ 21 = $1,714.29 a day, less 900 = $814.29; × 200 = $162,857; ÷ 1.25 = $130,286. Coverage: 40,000 ÷ 1.5 = $26,666.67 a month, less existing 900 × 21 = $18,900, leaves $7,766.67; ÷ 21 = $369.84 a day; × 200 = $73,968; ÷ 1.25 = $59,175. Maximum = $59,175, binding Coverage, daily debit $369.84. The existing $900 daily position is the swing factor: it consumes $18,900 of the $26,667 monthly debit capacity that a 1.5x coverage standard allows. Pay that position off with part of the proceeds and the coverage limit rises to 26,666.67 ÷ 21 × 200 ÷ 1.25 = $203,175, at which point the deposit multiple of $160,000 would bind instead. That is the arithmetic case for consolidation.

Three limits, three different questions

Each ceiling answers a different question. The deposit multiple is the market's rule of thumb: funders have long sized advances at some fraction or multiple of a month's true deposits, commonly between 0.5 and 1.5, and the multiple is a policy setting that encodes risk appetite. Debit capacity asks whether the daily payment physically fits in the account: given a cap on the share of deposits all debits may take, how much can a new debit be, and what advance does that debit repay over the term at the factor? Coverage asks whether the business earns enough to pay: how much debit can EBITDA support at a safety margin, after the debits it already pays? A maximum business funding calculator that reports only the multiple, as many do, answers the first question and ignores the two that predict default.

The binding limit is the one a funder should talk about. When the multiple binds, the file is strong on both cash and profit and the funder is choosing to be conservative; competing offers will size higher. When debit capacity binds, the account is crowded, usually by existing positions, and consolidation or a smaller amount are the options. When coverage binds, as in all three examples, deposits are flowing through a business that does not keep enough of them; the deposit multiple would have overfunded it. The bars chart shows all three so the gap between them is visible.

What each limit depends on
LimitRises withFalls withFix when it binds
Deposit multipleDeposits, policy multipleNothing elsePolicy decision only
Debit capacityDeposits, cap, termExisting debits, factorConsolidate positions, lengthen term, lower factor
EBITDA coverageEBITDA, termExisting debits, factor, minimum coverageLower factor, lengthen term, verify EBITDA add-backs

Setting the policy inputs

The policy multiple, debit cap, factor, term and minimum coverage are all yours to set, and the defaults are illustrative of common practice rather than rules. A multiple of 1.0 is a frequent starting point for standard files; premium files may see 1.2 to 1.5 and weaker ones 0.5 to 0.8. Caps of 10 to 20 percent of deposits are typical, lower for thin-margin trades. Minimum coverage for daily-debit products is usually set lower than for term loans, around 1.1 to 1.3, because the term is short and the funder's exposure amortizes quickly; the business loan underwriting calculator uses 1.25 for a multi-year loan, and the two should be consistent in your policy.

Monthly EBITDA is the input most likely to be wrong, because most small businesses do not report it. Derive it from the tax return or year-to-date financials: net income plus interest, taxes, depreciation and amortization, plus defensible owner add-backs, divided by twelve. For an advance applicant with only bank statements, estimate it as true deposits times gross margin less fixed monthly costs, and say so in the file. The EBITDA calculator and the EBITDA and cash flow underwriting guide cover the add-backs that survive scrutiny. An EBITDA figure that is a round 15 percent of deposits with no support is a guess, and the coverage limit built on it is a guess too.

Reading the maximum alongside the rest of the file

The maximum is a ceiling, not a recommendation. A file that supports $31,453 may be better served by $20,000 if the use of proceeds is a specific purchase, and the lower amount reduces the daily debit and the default risk. A file that supports $160,000 on the multiple but $59,000 on coverage should be funded at $59,000 or restructured, not at the figure the broker was hoping for. The tool's estimate card passes the maximum to the funding comparison so a borrower can see what products exist at that size; the funder's job is to decide how far below the ceiling to sit.

The inputs here are the outputs of other analysis. True monthly deposits should come from the average monthly deposits calculator with transfers and loan proceeds stripped; existing daily debits from the debt burden calculator, which converts weekly and monthly obligations to a daily equivalent; and the statements' trend and volatility from the bank statement cash flow analyzer. A declining or volatile deposit line argues for using the lowest recent month rather than the average as the deposit input, which lowers all three limits proportionately. The MCA funding capacity estimator gives the borrower-facing version of the same calculation.

  1. Strip deposits to the true figure and enter the daily equivalent of all existing positions.
  2. Enter EBITDA from documents, or from deposits times margin less fixed costs with the method noted.
  3. Run the calculation and note the binding limit.
  4. If coverage binds well below the multiple, re-check EBITDA before concluding; if it holds, size at the coverage figure.
  5. If capacity binds because of existing positions, model a consolidation and re-run with the replaced debits.

Term, factor and the shape of the limits

Both capacity and coverage limits scale with the term in business days and inversely with the factor, because a longer term collects more daily payments and a lower factor converts more of that payback into funded amount. Extending 160 days to 200 raises both limits by a quarter; cutting the factor from 1.3 to 1.2 raises them by about 8 percent. The deposit multiple does not move. This is why a coverage-bound file can often be funded at a larger amount with a longer term, provided the funder is willing to hold the exposure longer and the business is stable enough to justify it. The factor rate versus APR guide explains why that longer term also lowers the annualized cost to the merchant even at the same factor.

Term in business days is used because advances are repaid on business days, roughly 252 a year; 160 days is about seven and a half months and 200 days about nine and a half. Convert a quoted term in months by multiplying by 21. The factor is the total payback divided by the amount funded; for a loan priced with an interest rate, the equivalent factor is total payments divided by principal, which the MCA factor rate calculator will produce.

Policy, disclosure and when the maximum is not enough

The three-limit structure also supports consistent, explainable decisions. Documenting which limit bound and at what figure gives a clear reason for a counter-offer, which matters under the fair-lending rules of Regulation B and for the data that the CFPB's Section 1071 rule requires covered lenders to collect on small-business applications, including the amount applied for and the amount approved. For state disclosure regimes such as those administered by the California DFPI and the Georgia Department of Banking and Finance, the funded amount drives the disclosed total cost and payment figures, so sizing precision is also disclosure precision.

When the maximum falls short of what the business needs, the product may be wrong rather than the business. A purchase of equipment can be financed against the asset through equipment financing, where the lender's exposure is secured and coverage requirements are lower. Receivables can be advanced through invoice factoring, which sizes on the invoices rather than EBITDA. A business with two or more years of history and a strong owner may qualify for an SBA-guaranteed loan with a much longer term; the SBA 7(a) program page sets out the eligibility rules, and the Federal Reserve's Small Business Credit Survey documents how often applicants receive less than they sought and which products they turn to next.

Questions people ask

How much funding can a business get relative to its monthly deposits?

Advances are commonly sized between half and one and a half times true monthly deposits, but the deposit multiple is only one of three limits. The daily debit must also fit under a cap on the share of deposits all financing takes, and the business's EBITDA must cover all debits with a margin. The maximum business funding calculator returns the lowest of the three, which in most real files is coverage or capacity, not the multiple.

Why does coverage bind so often?

Because deposits measure sales and coverage measures profit, and most small businesses keep a modest share of sales as EBITDA. A business depositing $100,000 a month with $14,000 of EBITDA can carry a daily debit of about $255 at 1.2x coverage after existing positions, which funds roughly $31,000 at a 1.3 factor over 160 days, far below one month of deposits. The multiple ignores that.

How do existing daily debits affect the maximum?

They reduce both the debit capacity and the coverage limits by the same daily amount, converted to monthly at 21 business days. In the third example a $900 daily position consumed most of the coverage room; paying it off from the new proceeds would more than triple the coverage limit. Enter the daily equivalent of every position, including weekly and monthly obligations divided down to a day.

What term should I enter?

The number of business days over which the new advance or loan will be repaid, which is the quoted term in months times about 21. Longer terms raise the capacity and coverage limits because more daily payments are collected, but they extend the funder's exposure. Use the term you would actually offer, not the longest one your policy allows.

Is the maximum funding figure what I should offer?

It is the ceiling under your own policy. Offering below it reduces the daily debit and the default risk, which is often the better trade for a marginal file. Offering above it means overriding one of the three limits, which should require a documented reason such as verified collateral or a confirmed contract that will raise deposits during the term.

Sources and further reading

Related tools and guides

More underwriting

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Turn the estimate into real offers

One request, several funding partners, side-by-side payback. Nothing is binding until you accept an offer.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

Check business funding offers

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.