Skip to content
Alternative Finance

Loan calculators · Small business owners

How much business loan can I afford? Affordability calculator

If you are asking how much business loan can I afford, this calculator answers it the way a lender would: it takes the monthly cash you have available for debt, divides by a target coverage ratio, subtracts existing debt payments to get the largest new payment you can carry, and converts that payment into a loan amount at the rate and term you expect. It is for owners sizing a request before applying. The thing to watch is the cash figure: it must be after owner pay and taxes.

Loan you can afford
$148,352
Maximum new monthly payment
$3,300.00
Coverage after the new loan
1.25x
Total interest over the term
$49,648

Affordability is the payment your cash flow covers at the target ratio, converted into a principal amount at the rate and term you expect.

Your funding estimate

$148,352

Estimated amount from your inputs, about $3,300 per month over 60 months. An example calculation, not an offer from any lender.

Compare funding options

Formula

Maximum new monthly payment = (monthly cash available for debt payments ÷ target coverage ratio) − existing monthly debt payments, floored at zero.

Loan you can afford = maximum new payment × (1 − (1 + r)^−n) ÷ r, where r = expected interest rate ÷ 12 and n = term in years × 12. If the rate is zero, it is simply the payment × n.

Coverage after the new loan = monthly cash available ÷ (existing payments + maximum new payment). By construction this equals the target ratio whenever the new payment is above zero.

Total interest over the term = maximum new payment × n − loan you can afford.

Worked examples

Example 1: $6,000 of monthly cash, $1,500 of existing payments, 1.25 coverage, 12 percent, 5 years (the defaults)

Step 1: cash available ÷ target coverage = $6,000 ÷ 1.25 = $4,800. That is the most total debt service the cash flow supports at a 1.25 cushion. Step 2: subtract existing payments: $4,800 − $1,500 = $3,300 maximum new monthly payment. Step 3: convert to a loan amount. r = 0.12 ÷ 12 = 0.01; n = 60. (1.01)^−60 = 0.5504; 1 − 0.5504 = 0.4496; $3,300 × 0.4496 = $1,483.50; $1,483.50 ÷ 0.01 = $148,352. Step 4: coverage after the loan = $6,000 ÷ ($1,500 + $3,300) = $6,000 ÷ $4,800 = 1.25x, matching the target. Step 5: total interest = $3,300 × 60 − $148,352 = $198,000 − $148,352 = $49,648. The tool shows $148,352, $3,300.00, 1.25x and $49,648. A lender using the same inputs and the same 1.25 ratio would land on roughly the same ceiling, which is the point of the exercise.

Example 2: a stronger business with a longer term and a stricter lender

Inputs: $12,000 monthly cash, $4,000 existing payments, target coverage 1.35, 9 percent, 10 years. Step 1: $12,000 ÷ 1.35 = $8,888.89. Step 2: $8,888.89 − $4,000 = $4,888.89 maximum new payment. Step 3: r = 0.0075; n = 120; (1.0075)^−120 = 0.4079; 1 − 0.4079 = 0.5921; $4,888.89 × 0.5921 = $2,894.53; ÷ 0.0075 = $385,937. Coverage after = $12,000 ÷ $8,888.89 = 1.35x. Total interest = $4,888.89 × 120 − $385,937 = $586,667 − $385,937 = $200,730. The ten-year term is what makes $385,937 possible; at five years the same $4,888.89 payment supports only about $235,500. Terms that long are mainly available through SBA 7(a) loans for working capital and equipment, which is why the affordable amount and the product are decided together.

Example 3: when the answer is zero

Inputs: $3,000 monthly cash, $2,500 existing payments, 1.25 coverage, 12 percent, 3 years. Step 1: $3,000 ÷ 1.25 = $2,400. Step 2: $2,400 − $2,500 = −$100, floored at $0. Loan you can afford: $0. Coverage after = $3,000 ÷ $2,500 = 1.2x, which is the coverage the business already has on its existing debt, below the 1.25 target. The tool shows a warning: existing payments already use the cash flow available at this ratio. This is not a quirk of the calculator; it is the answer a bank underwriter would give. The routes out are to raise cash flow, reduce existing payments by refinancing or consolidating (the refinance calculator and debt consolidation calculator model both), or to use a product that does not depend on coverage, such as factoring secured by specific invoices.

Getting the cash figure right

Everything rests on the first input, and it is the one owners most often overstate. Monthly cash available for debt payments is operating cash flow after the owner has been paid a market salary and after taxes have been set aside, but before any new loan payment. It is not revenue, not gross profit and not the bank balance. Lenders rebuild it from tax returns and statements: net income, plus depreciation, amortization and interest, less owner draws and distributions, less taxes, divided by twelve. Our guide to EBITDA and cash flow underwriting walks through the add-backs lenders accept and the ones they do not.

  • Include existing loan payments in the second field, not the first. The tool subtracts them for you.
  • Include cash advance remittances, equipment leases and the minimum payments on cards and lines in existing debt. Underwriters will.
  • Exclude one-off receipts, owner capital contributions and the proceeds of the loan you are applying for.
  • Use a trailing twelve-month average unless the business is clearly seasonal, in which case use the low season; the payment will be due in it.

The cash flow calculator builds the monthly figure from collections and outflows if you do not have a clean number, and the debt-to-income ratio calculator adds up the existing obligations.

The coverage ratio: why 1.25 and what changes it

The target coverage ratio is the cushion a lender wants between cash flow and debt service. At 1.25, every dollar of payments is backed by $1.25 of cash flow, leaving 20 percent of the cash as margin for a bad month. Banks and SBA lenders commonly set minimums between 1.2 and 1.35 for operating businesses; real estate lenders use similar figures on property income; cash-flow lenders that fund in days accept thinner cover and price for it. The DSCR calculator computes the ratio from annual figures the way a credit memo presents it.

Loan supported by $6,000 of monthly cash with $1,500 of existing payments at 12 percent over 5 years
$202,2981.00x$157,3431.20x$148,3521.25x$132,3681.35x$112,3881.50x

At 1.00x every dollar of cash goes to debt; no lender lends there, and no owner should borrow there.

Use the ratio as a dial for your own risk, not just the lender's. A business with lumpy revenue, a single large customer or thin margins should size at 1.5 even if a lender would accept 1.25. The cash flow stress test shows what a 20 percent revenue drop does to coverage.

Rate and term: the levers that move the amount

The maximum payment is fixed by cash flow; the loan amount it buys depends entirely on rate and term. The table shows how much principal $1,000 of monthly payment supports at 12 percent for each term, which is a quick way to translate any payment into an amount.

Principal supported by $1,000 a month at 12 percent
TermPaymentsPrincipal
2 years24$21,243
3 years36$30,108
5 years60$44,955
7 years84$56,648
10 years120$69,701

Doubling the term from five to ten years raises the affordable amount by about 55 percent, not 100 percent, because the longer loan carries more interest. Rate works the other way: at 12 percent the default cash flow supports $148,352 over five years; at 9 percent it supports about $159,000, and at 18 percent about $130,000. Collateral and an SBA guarantee are the two ordinary ways to buy a lower rate and a longer term at the same time, which is why the SBA 7(a) calculator is the next stop for businesses with two years of history.

How lenders size loans, and where they differ from this tool

Banks and SBA lenders size from coverage much as this calculator does, then cap the result by collateral and by policy limits on loan-to-revenue. Online term lenders start from monthly revenue and bank balances instead of tax returns, and often cap loans at a share of annual revenue regardless of coverage; the eligibility checker shows that cap. Cash-advance funders size from average daily deposits and existing remittances and ignore coverage entirely, which is why advances can be approved for businesses this tool says can afford nothing, and why those advances so often fail.

The Federal Reserve's Small Business Credit Survey consistently finds that a large share of applicants receive less than the amount they asked for. Sizing the request to what the cash flow supports, and showing the arithmetic in the application, is the most direct way to be in the other group. The CFPB's Section 1071 rule will, over time, make the gap between amounts requested and amounts approved visible across lenders.

What to do with the number

  1. 1

    Compare it with what you need

    The funding needs calculator sizes the request from the other direction, one-time costs plus the working-capital gap plus a cushion. If need exceeds affordability, the project is too big for debt alone.

  2. 2

    Close a gap with structure, not stretch

    Finance the equipment on an equipment loan whose term matches its life, carry receivables on a line or factoring, and reserve the term loan for the rest. Several right-sized products often fit where one large loan does not.

  3. 3

    Improve the inputs before applying

    Refinancing an expensive existing loan lowers existing payments and raises affordability directly. Raising prices or cutting a cost that does not drive revenue does the same through the cash figure.

  4. 4

    Apply for the affordable amount, with evidence

    Submit the cash-flow build-up and the coverage calculation with the application. Underwriters trust applicants who have done their arithmetic, and the documents guide lists what to attach.

  5. 5

    Keep a margin

    Borrow less than the maximum. The ceiling assumes the next five years look like the last twelve months; they rarely do.

Taxes, guarantees and the personal side of affordability

Loan payments are not deductible, but interest is, so the after-tax cost of the payment is lower than its face value; the IRS Small Business and Self-Employed Tax Center explains business interest. Principal is repaid from after-tax profit, which is why a business that is profitable on paper but pays high taxes can still find a loan unaffordable: the tax must be set aside before the payment. The quarterly estimated tax schedule belongs in the cash figure.

Because almost every small business loan carries a personal guarantee, affordability is ultimately personal. If the business fails with $148,352 outstanding, the owner owes it. Size the loan to what you could carry through a bad year, not just what the ratio permits, and read our guide to personal guarantees before signing one.

Questions people ask

How much business loan can I afford on $10,000 a month of cash flow?

Divide the cash by the coverage ratio and subtract existing payments. At 1.25 with no existing debt, $10,000 supports an $8,000 monthly payment. At 12 percent over five years that is about $359,600 of principal; over three years about $240,900; over ten years about $557,600. Enter your own rate, term and existing payments in the calculator for the exact figure.

What coverage ratio do lenders use for small business loans?

Commonly 1.2 to 1.35 for bank and SBA term loans, meaning cash flow must exceed total debt payments by 20 to 35 percent. Some lenders accept 1.15 on strong collateral; online lenders look at revenue and bank balances instead. The calculator defaults to 1.25, a common middle.

Does the calculator include my existing loans?

Yes. Existing monthly debt payments, including cash advance remittances, equipment leases and minimum card and line payments, are subtracted from the debt service your cash flow supports before the new payment is calculated. If existing payments already use the available cash, the affordable new loan is zero and the tool says so.

Why does a longer term let me afford more?

The same monthly payment spread over more months repays more principal, because each payment carries a smaller share of the balance. The gain is less than proportional: doubling the term from five to ten years at 12 percent raises the affordable amount by roughly half, since the extra years are mostly interest. A longer term also means a higher total cost.

What should I do if the affordable amount is less than I need?

Split the need across products matched to each use, refinance expensive existing debt to free up payment capacity, improve cash flow before applying, or reduce the project. Do not take an advance to fill the gap; an advance sized on deposits rather than coverage is how businesses in this position end up with payments they cannot make.

Sources and further reading

Site calculators on the same topic

Related tools and guides

More loan calculators

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Turn the estimate into real offers

One request, several funding partners, side-by-side payback. Nothing is binding until you accept an offer.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

Check business term loan offers

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.