Skip to content
Alternative Finance

Commercial loans · Business loan brokers

Business loan broker commission calculator

This calculator turns a loan amount, the points the lender pays, any packaging or success fee the borrower pays and the rep split into gross commission, rep payout, house net and a monthly run rate. It is built for business loan brokers pricing bank, SBA, equipment, line of credit and commercial real estate deals. The one thing to watch: on SBA loans every dollar a borrower pays an agent must be disclosed on SBA Form 159 and is capped, and an undisclosed fee can cost the lender its guarantee.

Gross commission on this deal
$5,000
Lender-paid points
$5,000
Borrower-paid fee
$0
Rep payout
$2,500
House net
$2,500
Monthly gross at this pace
$15,000
Typical range for term
1 – 3 points

Commission on bank and SBA loans is lower than on advances but the amounts are larger. SBA rules require the lender to collect and disclose any fee the borrower pays an agent; undisclosed fees can void the guarantee.

Formula

Lender-paid points = Loan amount × Points paid by the lender ÷ 100

Gross commission = Lender-paid points + Packaging or success fee charged to the borrower

Rep payout = Gross commission × Share paid to the originating rep ÷ 100; House net = Gross commission − Rep payout

Monthly gross at this pace = Gross commission × Deals closed per month

The typical range shown for each product is a label, not an input: 1 to 3 points on term loans, 1 to 2 on SBA 7(a) with borrower fees capped and disclosed, 2 to 5 on equipment, 1 to 2 or a flat referral fee on lines, 0.5 to 2 on commercial real estate.

Worked examples

Example 1: a $250,000 term loan at two points with a 50 percent rep split

Use the tool's defaults: Loan amount $250,000, Product set to bank or online term loan, Points paid by the lender 2, Packaging fee $0, Share paid to the originating rep 50 percent, Deals closed per month 3. Lender-paid points = $250,000 × 0.02 = $5,000. Gross commission = $5,000 + $0 = $5,000. Rep payout = $5,000 × 0.50 = $2,500. House net = $5,000 − $2,500 = $2,500. Monthly gross at this pace = $5,000 × 3 = $15,000. The tool shows a typical range of 1 to 3 points for a term loan, so two points sits in the middle. Notice what is not in the calculation: the borrower's interest rate. On a lender-paid deal the broker's income depends on the amount funded and the points agreed with the lender, which is why brokers in this segment track average funded amount as closely as they track volume.

Example 2: a $1.5 million SBA 7(a) loan with one lender point and a $2,500 packaging fee

Enter Loan amount $1,500,000, Product SBA 7(a), Points paid by the lender 1, Packaging or success fee charged to the borrower $2,500, Share paid to the originating rep 60 percent, Deals closed per month 2. Lender-paid points = $1,500,000 × 0.01 = $15,000. Gross commission = $15,000 + $2,500 = $17,500. Rep payout = $17,500 × 0.60 = $10,500. House net = $17,500 − $10,500 = $7,000. Monthly gross at this pace = $17,500 × 2 = $35,000. One point on an SBA loan is a lower rate than the term-loan example, but the deal is six times larger, so the dollar commission is three and a half times bigger. The $2,500 packaging fee is paid by the borrower and must appear on SBA Form 159, signed by the applicant and the lender, with the lender responsible for ensuring it is reasonable for the work done.

Example 3: an $85,000 equipment deal at four points with a 40 percent rep split

Enter Loan amount $85,000, Product equipment financing, Points paid by the lender 4, Packaging fee $0, Share paid to the originating rep 40 percent, Deals closed per month 6. Lender-paid points = $85,000 × 0.04 = $3,400. Gross commission = $3,400. Rep payout = $3,400 × 0.40 = $1,360. House net = $3,400 − $1,360 = $2,040. Monthly gross at this pace = $3,400 × 6 = $20,400. Equipment lenders commonly pay more points than banks because the ticket is smaller and the vendor relationship does much of the sourcing, which is why the tool labels 2 to 5 points as typical. Six smaller equipment deals a month produce more gross than three term loans in example 1, but they also need six sets of invoices, serial numbers and lien filings, so compare the monthly figure against the processing hours each product consumes.

How business loan broker commission is actually paid

Business loan broker commission on bank, SBA and commercial products arrives in two streams. The first is lender-paid points: a percentage of the funded amount the lender pays the referral source at closing, sometimes called a referral fee, yield spread or origination share. The second is borrower-paid compensation: a packaging, consulting or success fee the client agrees to pay the broker for assembling the file. The calculator keeps them separate because they are treated differently by lenders, by the SBA and by state disclosure laws, and because a rep split usually applies to the combined gross.

Points are quoted on the funded amount, not the approved amount, and most lender agreements pay only after the loan closes and the rescission or cancellation window, if any, has passed. On lines of credit some lenders pay on the committed limit and others on the initial draw; the calculator assumes the figure you enter as Loan amount is the figure the points apply to, so enter the drawn amount if that is what the lender pays on. Commercial real estate lenders pay the fewest points because the loans are large and the sales cycle is long; equipment funders pay the most because tickets are small and the broker often brings the vendor relationship.

The split field models the most common brokerage structure: the house holds the lender relationships and the licence, the originating rep is paid a share of gross. Some shops pay the rep on house net after a processing charge, others pay on gross with a draw against commission. If your plan deducts a per-file processing cost before the split, subtract it from the packaging fee field or run the deal twice. The how brokers get paid guide walks through these structures product by product.

SBA rules: Form 159, fee caps and what voids the guarantee

The SBA permits lenders to pay referral fees to agents from their own funds, and it permits applicants to pay agents for packaging and consulting, but it regulates the borrower-paid side closely. When an applicant pays any fee to an agent in connection with a 7(a) loan or a 504 loan, the fee must be disclosed on SBA Form 159, the Fee Disclosure and Compensation Agreement, signed by the applicant, the agent and the lender. The lender must keep the form in the file and the SBA can review it on a guarantee purchase request.

  • Fees must be reasonable for the services actually performed and documented with an itemized statement; the SBA's standard operating procedures set ceilings that step down as the loan size rises, so always check the current limit before quoting a packaging fee on a large request.
  • Contingency fees tied to approval, fees paid from loan proceeds without disclosure and fees charged for services the lender already performs are prohibited.
  • Agents cannot be paid by both the lender and the borrower for the same service on the same loan without disclosure of both amounts.
  • A lender that funds a loan with undisclosed agent fees risks a denial or repair of the guarantee, which is why SBA lenders ask brokers to sign Form 159 before closing rather than after.

The practical consequence for a broker is that SBA commission is mostly lender-paid. A one point referral fee on a $1.5 million loan, as in example 2, is comparable in dollars to several smaller bank deals, and it carries no disclosure burden beyond the lender's own agent paperwork. Use the SBA loan qualification checker before you spend packaging hours on a file that fails a statutory test.

Reading the result: gross, rep payout, house net and run rate

Gross commission on this deal is the number the lender and borrower together pay the brokerage. Rep payout is the originating rep's share; House net is what remains for the firm before its own costs. Monthly gross at this pace multiplies the single deal by the Deals closed per month figure and is a planning number, not a forecast: it assumes every deal looks like this one. A rep who closes three $250,000 term loans and one $85,000 equipment deal a month has a different mix, and the mix matters because the point rates differ by product.

Sanity-check the output against the typical range label. If you entered five points on a commercial mortgage, the label of 0.5 to 2 points tells you the lender is unlikely to pay that and the borrower would have to make up the difference, which triggers disclosure. If you entered a packaging fee of $15,000 on a $250,000 SBA loan, the fee is implausible against the SBA ceilings and the lender will not close it. The ranges are commonly observed conventions, not a rate card, and a new lender relationship may fall outside them.

What each output is used for
OutputWho looks at itDecision it informs
Gross commissionBrokerage ownerWhether the deal is worth the packaging hours
Lender-paid pointsLender, complianceAgent fee reporting on SBA and bank files
Borrower-paid feeBorrower, SBA, state regulatorForm 159 disclosure and state commercial financing disclosures
Rep payoutOriginating repCompensation plan and draw reconciliation
House netBrokerage ownerCovering processing, marketing and lead cost
Monthly gross at this paceOwner, lead buyerMarketing budget and cost per acquisition targets

Disclosure beyond the SBA: state laws and federal reporting

Several states now require commercial financing providers, and in some cases brokers, to give borrowers written disclosures of cost and fees before a commercial financing contract is signed. California's rules are administered by the Department of Financial Protection and Innovation, New York's by the Department of Financial Services, and Utah, Virginia, Georgia, Florida, Connecticut and Kansas have their own statutes with different thresholds and formats. Broker-paid compensation is a disclosable item under some of these regimes, and some states require brokers of commercial financing to register. Check the rule for the borrower's state, not your own.

At the federal level, the CFPB's small business lending rule under Section 1071 requires covered lenders to collect and report data about applications from small businesses, including pricing. It applies to lenders rather than brokers, but it shapes the data lenders ask you to supply at submission. The FTC's small business guidance applies to advertising and sales practices, which includes the way commission-funded offers are presented to borrowers. Commission income itself is ordinary income to the brokerage and, when paid to independent reps, is reported on information returns; the IRS small business pages cover the contractor reporting rules.

Where a state requires a cost disclosure that includes broker compensation, the Borrower-paid fee field is the figure that appears. Lender-paid points usually appear only where the law requires disclosure of all compensation paid to a broker, which is why keeping the two streams separate in your records is good practice regardless of product.

Pricing a deal: when to take points, a fee, or both

  1. 1

    Start from the lender's agreement

    Each lender publishes a referral schedule, often tiered by amount or product. Enter that figure as Points paid by the lender. Do not assume you can negotiate above the schedule on a first deal.

  2. 2

    Decide whether the file justifies a borrower-paid fee

    A packaging fee is defensible when you assemble projections, a business plan or a debt schedule the borrower could not produce alone. On SBA deals it must be itemized and within the SBA ceiling; on bank deals it must be disclosed to the lender if the lender's agreement requires it.

  3. 3

    Check the combined cost against the alternative

    If points plus fee push the borrower's all-in cost above what a competing lender would charge with no broker, the borrower will eventually find out. Run the deal through the loan closing cost calculator to see the fee alongside everything else.

  4. 4

    Set the split before the file goes in

    Disputes over rep splits on large SBA or commercial real estate deals are common because the payout is large and the sales cycle is long. Agree the split in writing when the file is submitted.

  5. 5

    Track monthly gross against lead cost

    The Monthly gross figure only means something next to what it costs to generate the deals. A brokerage spending more on leads than House net can cover is financing growth with its own margin.

Brokers who also place merchant cash advances will notice that bank and SBA points are a fraction of advance commissions. The MCA commission calculator shows the comparison; the trade-off is that bank and SBA deals are larger, renew into long relationships and carry far less regulatory exposure for the broker.

Red flags that cost brokers their lender relationships

  • Charging a borrower a fee that depends on approval or on loan size. Prohibited on SBA loans and a disclosure problem in several states.
  • Collecting a borrower fee from loan proceeds without the lender's knowledge. SBA lenders will decline the file; bank lenders will end the referral agreement.
  • Submitting the same file to several lenders without telling the borrower. Many lender agreements require exclusivity for a period and some states require disclosure of all submissions.
  • Presenting lender-paid points as free to the borrower. The points are priced into the rate or fee, and the borrower is entitled to ask.
  • Splitting commission with an unlicensed referrer in a state that requires broker registration. The registered broker carries the liability.

The common thread is disclosure. A commission structure that would embarrass you if the borrower, the lender and the state regulator all saw it on one page is the structure to avoid. The calculator's separation of lender-paid and borrower-paid compensation exists so that each line can be shown to whoever is entitled to see it.

Questions people ask

How much commission does a business loan broker make on an SBA loan?

Lender-paid referral fees on SBA 7(a) loans commonly fall in the one to two point range, paid from the lender's own funds at closing. Borrower-paid packaging fees are allowed but must be reasonable for the work, itemized, within the SBA's published ceiling for the loan size and disclosed on SBA Form 159. On a $1.5 million loan one point is $15,000, which is why SBA volume is attractive despite the lower rate.

Can a broker charge the borrower a fee and receive lender points on the same loan?

Yes on most bank and commercial products, provided the lender's referral agreement allows it and any state disclosure law is followed. On SBA loans both amounts must be disclosed and the borrower-paid fee cannot be for services the lender already performs. Enter both in the calculator to see the combined gross and make sure the total is defensible against what the borrower could get elsewhere.

What is a typical business loan broker commission on equipment financing?

Equipment funders commonly pay two to five points of the financed amount, higher than banks because tickets are smaller and the broker often brings a vendor relationship. On an $85,000 deal four points is $3,400. Some funders also allow the broker to add a documentation fee paid by the borrower; treat that as the packaging fee in the calculator.

Are lender-paid points taxable to the brokerage?

Commission income is ordinary business income to the brokerage. Amounts paid onward to independent reps are a business expense and, above the reporting threshold, are reported to the IRS on information returns. The IRS small business pages explain contractor reporting. The calculator shows pre-tax figures; it does not model payroll or self-employment tax on the rep payout.

Does the calculator work for commercial real estate loans?

Yes. Select commercial real estate as the product and the tool labels 0.5 to 2 points as the commonly observed range. Points are lower because loan amounts are large; on a $3 million mortgage one point is $30,000. Expect lenders to pay at funding, which on commercial property can be months after submission, so the monthly run-rate figure should be read as an average over a long pipeline.

Sources and further reading

Related tools and guides

More commercial loans

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Turn the estimate into real offers

One request, several funding partners, side-by-side payback. Nothing is binding until you accept an offer.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

See what you may qualify for

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.