Skip to content
Alternative Finance

Lead gen · Lead buyers and sales teams

Lead scoring calculator for funding leads

This lead scoring calculator rates a business funding lead out of 100 using eight weighted factors: stated revenue (20 points), months in business (15), amount requested relative to revenue (10), stated credit (15), urgency (15), lead age (10), exclusivity (10) and contact validation (5). The score maps to a tier from A to D, a routing instruction and a suggested price as a multiple of your tier-B base price. Lead buyers and sales managers use it to route and to bid. Watch the calibration: the weights are a starting point to be checked against your own funded outcomes.

Lead score
73 / 100
Tier
B
Suggested price
$50.00
Routing
Standard queue, call within 1 hour
Amount to revenue
1.2

Weights: revenue 20, tenure 15, amount fit 10, credit 15, intent 15, freshness 10, exclusivity 10, validation 5. Calibrate them against your own funded outcomes every quarter.

Score contribution
  • Revenue10
  • Tenure10
  • Credit8.4
  • Intent10
  • Freshness9.7
  • Exclusive10

Formula

Revenue points = min(Stated monthly revenue ÷ $100,000, 1) × 20. Tenure points = min(Months in business ÷ 36, 1) × 15. Credit points = min(max((Stated credit − 500) ÷ 250, 0), 1) × 15.

Amount-fit points: ratio = Amount requested ÷ Stated monthly revenue; 10 points if the ratio is between 0.3 and 1.5, 6 points if below 0.3, 3 points if above 1.5. Intent points = 15 for "within days", 10 for "this month", 2 for "just researching".

Freshness points = (1 − min(Lead age in hours ÷ 72, 1)) × 10, so a lead older than 72 hours scores zero here. Exclusivity = 10 points if exclusive, 3 if not. Validation = 5 points if phone and email are validated, otherwise 0.

Lead score = sum of the eight, capped at 100. Tier A ≥ 75, B ≥ 55, C ≥ 35, else D. Suggested price = Base price for a tier-B lead × 1.6 (A), × 1.0 (B), × 0.5 (C) or × 0.15 (D).

Worked examples

Example 1: a typical fresh exclusive lead (tool defaults)

Inputs: $50,000 monthly revenue, 24 months in business, $60,000 requested, credit midpoint 640, timeline "this month", lead age 2 hours, exclusive, phone and email validated, base price $50. Revenue: 50,000 ÷ 100,000 = 0.5 × 20 = 10 points. Tenure: 24 ÷ 36 = 0.667 × 15 = 10 points. Amount fit: 60,000 ÷ 50,000 = 1.2, inside the 0.3 to 1.5 band, 10 points. Credit: (640 − 500) ÷ 250 = 0.56 × 15 = 8.4 points. Intent: "this month" = 10 points. Freshness: 1 − 2 ÷ 72 = 0.972 × 10 = 9.72 points. Exclusive: 10. Validated: 5. Total: 10 + 10 + 10 + 8.4 + 10 + 9.72 + 10 + 5 = 73.12, shown as 73 / 100. Tier B, because 73 is below the 75 threshold for A. Suggested price: $50 × 1.0 = $50.00. Routing: standard queue, call within one hour. Amount to revenue: 1.20. A credit midpoint of 675 (adding 2.1 points) or a "within days" timeline (adding 5) would each push this lead into tier A.

Example 2: an urgent, established merchant

Inputs: $120,000 revenue, 60 months, $100,000 requested, credit 720, "within days", 0.5 hours old, exclusive, validated, base $50. Revenue: 120,000 ÷ 100,000 = 1.2, capped at 1, × 20 = 20. Tenure: 60 ÷ 36 = 1.67, capped at 1, × 15 = 15. Amount fit: 100,000 ÷ 120,000 = 0.83, in band, 10. Credit: (720 − 500) ÷ 250 = 0.88 × 15 = 13.2. Intent: 15. Freshness: 1 − 0.5 ÷ 72 = 0.993 × 10 = 9.93. Exclusive 10, validated 5. Total: 20 + 15 + 10 + 13.2 + 15 + 9.93 + 10 + 5 = 98.13, shown as 98 / 100. Tier A, suggested price $50 × 1.6 = $80.00, routing to a senior rep within five minutes. The caps on revenue and tenure mean that a merchant with $500,000 of revenue and ten years in business scores the same on those factors as this one; the model is built to separate fundable from unfundable, not to rank large merchants against each other.

Example 3: an aged, shared, researching lead

Inputs: $15,000 revenue, 6 months, $50,000 requested, credit 560, "just researching", 96 hours old, not exclusive, not validated, base $50. Revenue: 0.15 × 20 = 3. Tenure: 6 ÷ 36 = 0.167 × 15 = 2.5. Amount fit: 50,000 ÷ 15,000 = 3.33, above 1.5, so 3 points. Credit: (560 − 500) ÷ 250 = 0.24 × 15 = 3.6. Intent: 2. Freshness: 96 ÷ 72 exceeds 1, capped, so 0 points. Not exclusive: 3. Not validated: 0. Total: 3 + 2.5 + 3 + 3.6 + 2 + 0 + 3 + 0 = 17.1, shown as 17 / 100. Tier D, suggested price $50 × 0.15 = $7.50, routing to email only or discard. The lead asks for more than three months of revenue, which most cash advance funders would not approve, and it has been on the market for four days.

The eight factors and why they are weighted as they are

The weights total 100: revenue 20, tenure 15, amount fit 10, credit 15, intent 15, freshness 10, exclusivity 10 and validation 5. Fifty points describe the merchant's fundability (revenue, tenure, amount fit, credit), twenty-five describe the lead's commercial state (intent, freshness) and fifteen describe the record itself (exclusivity, validation). The split reflects how funding leads fail: most unfunded leads are either unfundable merchants or fundable merchants who were reached too late or by too many buyers. A lead scoring calculator that ignored the second half would route perfectly fundable but stale leads to senior reps.

Scoring factors as coded
FactorMax pointsFull marks atZero or minimum at
Stated monthly revenue20$100,000 or more$0
Months in business1536 months or more0 months
Amount to revenue fit10Ratio 0.3 to 1.56 points below 0.3; 3 points above 1.5
Stated credit midpoint15750 or above500 or below
Stated timeline15Within days2 points for just researching
Lead age100 hours72 hours or older
Exclusive10Yes3 points if shared
Phone and email validated5Yes0 if not

Revenue and tenure are linear up to a cap, because beyond about $100,000 a month and three years the additional revenue or tenure rarely changes whether a funder will approve; it changes the amount, which price captures elsewhere. Credit is linear between 500 and 750 because that band is where funder appetite differs most. Amount fit is a band rather than a line: a request far below revenue suggests a small deal, and a request far above it suggests a merchant who will be declined or disappointed; both are penalised, the second more heavily.

Tiers, routing and price multiples

The tier thresholds are 75 for A, 55 for B and 35 for C. Routing follows: tier A to a senior rep within five minutes, tier B to the standard queue within an hour, tier C to a nurture sequence with a same-day call, and tier D to email only or discard. The price multiples of 1.6, 1.0, 0.5 and 0.15 against your tier-B base are deliberately steep because lead value is multiplicative; a lead that is both fresher and more fundable is worth far more than the sum of two small improvements. The lead response time calculator quantifies why the five-minute routing for tier A matters, and the lead distribution calculator can use tiers as the basis for weighting buyers.

A buyer uses the score two ways. Internally, it decides who calls and how fast. Externally, the suggested price is a bid: if a vendor's leads average tier C by your scoring, a price of half your tier-B base is what their economics justify, and the business loan lead value calculator will confirm that from the funding rates you observe on each tier.

Default example: points by factor
  • Revenue10
  • Tenure10
  • Amount fit10
  • Credit8.4
  • Intent10
  • Freshness9.7
  • Exclusive10
  • Validated5

The default lead loses most of its points on revenue, tenure and credit, which are the merchant's facts, and almost none on freshness or exclusivity, which are the vendor's.

Calibrating the weights to your own outcomes

The weights are a reasonable prior, not a fitted model. The right weights for your operation are the ones that best predict funded deals in your own data, and they drift as your funder panel and products change. A simple calibration routine every quarter: score every lead received in the quarter with the current weights, group by tier, and compute the funding rate per tier. If tier A funds at three times tier B and tier B at twice tier C, the tiers are ordering leads correctly and the multiples are roughly right. If tier B funds as often as tier A, the factors that separate them, usually credit and intent, are over-weighted for your funders.

  1. 1

    Pull one quarter of leads with outcomes

    You need stated revenue, tenure, amount, credit range, timeline, age at first call, exclusivity, validation status and whether the lead funded.

  2. 2

    Compute funding rate by each factor's bands

    For instance, funding rate for credit 500 to 580, 580 to 660 and 660 plus. Factors whose bands show the largest spread deserve more weight.

  3. 3

    Adjust one or two weights, keeping the total at 100

    Move five points at a time; large changes overfit a single quarter.

  4. 4

    Check price multiples against lead value by tier

    Expected revenue per lead by tier, from your funding rates and commission, should be roughly proportional to 1.6 : 1.0 : 0.5 : 0.15. If not, adjust the multiples rather than the weights.

Wikipedia's overview of lead scoring describes the general method, including statistical approaches that replace hand-set weights once you have enough outcomes.

Fair lending, credit data and what a score may not use

The score uses stated facts about the business and the lead, which is appropriate for routing and pricing. Two lines should not be crossed. First, the Equal Credit Opportunity Act and Regulation B, 12 CFR Part 1002, apply to business credit as well as consumer credit and prohibit discrimination on bases such as race, sex, national origin, religion, marital status and age; a scoring model must not use those characteristics or close proxies for them, such as neighbourhood as a stand-in for race. Second, if your scoring feeds the credit decision rather than only the routing, Regulation B's adverse action notice requirements may apply when an application is declined, and the CFPB's small business lending rule under Section 1071 requires covered lenders to collect and report demographic data on small business credit applications, with a firewall between that data and underwriters.

The credit input is the merchant's stated range, not a pulled score. Pulling a consumer credit report on the owner requires a permissible purpose under the Fair Credit Reporting Act, typically the owner's written authorisation on the application; a lead form that asks for a self-reported range avoids that until there is an application. Owners who want to know their own standing can get free reports at annualcreditreport.com.

Freshness and exclusivity also carry a legal dimension. A 72-hour-old shared lead is not only less likely to fund; it has been called by several buyers, and if the consent on which those calls rest did not name each caller, the TCPA exposure sits with every buyer who dialed. The FCC's consent rules are at 47 CFR 64.1200; a routing rule that sends unvalidated, shared leads to email only, as tier D does, is also a compliance rule.

Input mistakes and sanity checks

  • Entering annual revenue in the monthly field. A $600,000-a-year business has $50,000 of monthly revenue; the annual figure caps the factor at full marks for every lead.
  • Using the requested amount from a dropdown's top band rather than the merchant's stated figure; it pushes the amount-fit ratio out of band.
  • Entering credit as a range label ("fair") rather than the midpoint number; the tool needs a number between 300 and 850.
  • Measuring lead age from delivery rather than from the merchant's submission. Age is the merchant's clock.
  • Treating a vendor's "exclusive" claim as validated. Exclusive means not sold elsewhere, including after a holding period.
  • Assuming the score is a funding probability. It is an ordinal rank; calibrate it to your own funding rates before quoting probabilities.

A quick plausibility check: a lead that scores above 90 should look like a merchant any funder would approve today, and one below 25 should look like a lead you would not call. If either feels wrong, the input most likely at fault is revenue or amount.

Using tiers in the rest of the operation

Scoring pays for itself through routing before it pays through pricing. Senior reps spend their time on tier A, where speed matters most; tier C goes to a nurture sequence that costs nothing per lead; tier D is not dialed, which removes the lowest-yield calls from the floor and the highest-risk calls from the compliance log. The funnel effect is visible in the lead conversion rate calculator: contact and application rates rise when reps work the right leads first.

For vendor management, score every lead at delivery and report the tier mix back to each vendor monthly. Vendors whose mix drifts toward C and D are reselling, aging or loosening their forms, and the suggested price per tier gives you an objective basis for repricing. For merchants, a product fit check is a useful complement to the score: a tier C lead asking for three times its monthly revenue may be a good equipment financing or SBA loan prospect even if it is a poor cash advance prospect, and routing it to the right product is better than discarding it.

Questions people ask

How does the lead scoring calculator weight each factor?

Revenue 20 points, tenure 15, amount fit 10, credit 15, intent 15, freshness 10, exclusivity 10 and validation 5, totalling 100. Revenue, tenure and credit are linear up to caps of $100,000 a month, 36 months and a 750 score; freshness falls to zero at 72 hours; intent gives 15, 10 or 2 points; exclusivity gives 10 or 3; validation 5 or 0.

What score makes a lead tier A?

75 or more. Tier B is 55 to 74, tier C is 35 to 54 and tier D is below 35. The default example scores 73, just under tier A; a credit midpoint of about 675 or a "within days" timeline would lift it over the line.

How is the suggested price calculated?

As a multiple of your base price for a tier-B lead: 1.6 times for tier A, 1.0 for B, 0.5 for C and 0.15 for D. With a $50 base, that is $80, $50, $25 and $7.50. Adjust the base to what your funnel economics support and check the multiples against funding rates by tier each quarter.

Can I use this score to decline applications?

It is designed for routing and pricing leads, not for credit decisions. If scoring feeds a credit decision, Regulation B's prohibitions on discriminatory factors and its adverse action requirements apply, and the CFPB's Section 1071 data collection rule may apply to the lender. Keep routing scores and underwriting separate.

Why does a lead older than 72 hours get zero freshness points?

Because the model treats three days as the point at which a funding lead has usually been contacted by other buyers or lost urgency. Freshness falls linearly from 10 points at zero hours to zero at 72 hours. If your data shows leads still converting well at four days, extend the window when you calibrate.

Sources and further reading

Related tools and guides

More lead gen

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Turn the estimate into real offers

One request, several funding partners, side-by-side payback. Nothing is binding until you accept an offer.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

See what you may qualify for

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.