Skip to content
Alternative Finance

Lead gen · Lead generators and sales managers

Lead distribution calculator

This lead distribution calculator splits a month's leads across buyers or reps. Each line holds a name, a monthly cap, a weight and a price per lead; the tool allocates lead slots in proportion to weight until each buyer's cap is reached, then reports leads and revenue per buyer, fill rate, unmet demand and the average price realized. Lead generators use it to plan contracts and sales managers to balance a floor. Watch unmet demand: capacity you cannot fill is the clearest signal of what your next traffic dollar is worth.

Monthly revenue from distribution
$84,000
Lead slots allocated
1,500 of 1,500
Total buyer demand (caps)
1,800
Unmet demand
300
Average price realized
$56.00

Allocation is weighted round-robin up to each buyer's cap. Selling to more than one buyer per lead raises revenue now and lowers the price buyers will pay next quarter.

Leads allocated
  • Buyer A600
  • Buyer B400
  • Buyer C300
  • Buyer D200
Allocation by buyer
BuyerCapWeightPriceAllocatedFillRevenue
Buyer A6003$65600100%$39,000
Buyer B4002$55400100%$22,000
Buyer C3002$50300100%$15,000
Buyer D5001$4020040%$8,000

Formula

Lead slots to allocate = Monthly lead volume × Maximum buyers per lead. Total buyer demand = sum of monthly caps.

Allocation runs in passes. In each pass, every buyer still below its cap receives min(cap − already allocated, floor(remaining slots × weight ÷ sum of open buyers' weights)). The pass repeats, with the remaining slots, until the slots run out, no buyer is below cap, or 20 passes have run; if a pass allocates nothing because of rounding, each open buyer receives one slot in turn.

Revenue = sum over buyers of allocated leads × price per lead. Fill = allocated ÷ cap for each buyer. Unmet demand = max(0, total caps − total allocated). Average price realized = Revenue ÷ total allocated.

Buyer lines are entered as: name, cap, weight, price. Weight is relative: a weight of 3 against weights of 2, 2 and 1 claims 3 ÷ 8 of each pass.

Worked examples

Example 1: 1,500 exclusive leads across four buyers (tool defaults)

Buyers: A cap 600, weight 3, $65; B cap 400, weight 2, $55; C cap 300, weight 2, $50; D cap 500, weight 1, $40. Slots: 1,500 × 1 = 1,500. Pass 1, all four open, weights sum to 8: A gets min(600, floor(1,500 × 3 ÷ 8) = 562) = 562; B gets min(400, floor(375)) = 375; C gets min(300, 375) = 300, hitting its cap; D gets min(500, floor(187.5)) = 187. Allocated 1,424; remaining 76. Pass 2, A, B and D open, weights 6: A gets min(38, floor(76 × 3 ÷ 6) = 38) = 38, reaching 600; B gets min(25, floor(25.3)) = 25, reaching 400; D gets min(313, floor(12.7)) = 12, now 199. Allocated 75; remaining 1. Pass 3, only D open: D gets 1, now 200. Final: A 600, B 400, C 300, D 200; 1,500 of 1,500 slots. Revenue: 600 × $65 + 400 × $55 + 300 × $50 + 200 × $40 = $39,000 + $22,000 + $15,000 + $8,000 = $84,000. Demand 1,800; unmet 300, all of it D's. Average price: $84,000 ÷ 1,500 = $56.00. Fill: A, B, C 100%; D 40%.

Example 2: the same buyers with each lead sold to two

Set maximum buyers per lead to 2. Slots: 1,500 × 2 = 3,000. Pass 1, weights 8: A gets min(600, floor(3,000 × 3 ÷ 8) = 1,125) = 600; B min(400, 750) = 400; C min(300, 750) = 300; D min(500, floor(375)) = 375. Allocated 1,675; remaining 1,325. Pass 2, only D open: D gets min(125, 1,325) = 125, reaching 500. Allocated 125; remaining 1,200. Pass 3: no buyer below cap, so the loop stops. Final: 1,800 of 3,000 slots allocated; every buyer at 100% fill; unmet demand 0. Revenue: $39,000 + $22,000 + $15,000 + $20,000 = $96,000. Average price: $96,000 ÷ 1,800 = $53.33. Revenue rose by $12,000 because D was filled, but 1,200 slots went unsold, and the prices entered were exclusive prices; a lead sold to two buyers would normally be priced lower, so re-run with shared prices from the lead pricing calculator before relying on the $96,000.

Example 3: a short month of 800 leads

Volume 800, one buyer per lead, same buyer lines. Pass 1, weights 8: A gets min(600, floor(800 × 3 ÷ 8) = 300) = 300; B min(400, 200) = 200; C min(300, 200) = 200; D min(500, 100) = 100. Allocated 800; remaining 0, so the loop ends after one pass. Revenue: 300 × $65 + 200 × $55 + 200 × $50 + 100 × $40 = $19,500 + $11,000 + $10,000 + $4,000 = $44,500. Demand 1,800; unmet 1,000. Average price: $44,500 ÷ 800 = $55.63. Fill: A 50%, B 50%, C 67%, D 20%. When volume is short, weights decide everything and caps never bind: A's weight of 3 claims 37.5% of every lead, and the cheapest buyer, D, is starved. If D's contract has a minimum, the weights must change.

How the allocation works, pass by pass

The method is weighted round-robin with caps, the same family of algorithms used to share a resource among queues; Wikipedia's entry on weighted round robin describes the general scheme. Each pass takes the slots still unallocated and hands each open buyer a share proportional to its weight among the open buyers, rounded down, but never more than the room left under its cap. Buyers that reach their cap drop out, the remaining buyers' weights are re-normalised, and the next pass distributes what is left. Because each pass rounds down, a few slots can be left over; a final rule hands them out one at a time so the total always reconciles.

Three consequences follow. When volume is below total demand, weights control the outcome and low-weight buyers are starved first (example 3). When volume exceeds total demand, caps control the outcome, every buyer is filled and the surplus is unsold (example 2). In between, high-weight buyers fill first and the lowest-weight buyer absorbs whatever remains (example 1), so the buyer with weight 1 is effectively your overflow partner. Design weights with that in mind: the weight is not a share of volume, it is a priority in the queue.

Setting caps, weights and prices in buyer contracts

A cap is the buyer's stated monthly maximum, usually written into the insertion order along with filters (states, minimum revenue, months in business) and a return window. Weight is yours to set, and the sensible basis is value to you per lead: price, return rate and reliability of payment. A buyer paying $65 with few returns and prompt payment deserves a higher weight than one paying $40 who returns a fifth of deliveries. Many lead generators set weight proportional to price net of returns, which makes the allocation maximise revenue subject to caps; others reserve part of the weight for relationship reasons, such as a buyer who is scaling and will raise its cap.

Default example: what each buyer contributes
BuyerCapWeightPriceAllocatedRevenueShare of revenue
Buyer A6003$65600$39,00046.4%
Buyer B4002$55400$22,00026.2%
Buyer C3002$50300$15,00017.9%
Buyer D5001$40200$8,0009.5%

Concentration is the risk the table exposes: nearly half of revenue depends on Buyer A. If A pauses, 600 leads a month need a home, and D's spare cap of 300 at $40 only absorbs half of them at a lower price. A diversified buyer panel costs a little average price and buys a lot of resilience. The lead pricing calculator sets the price for each buyer type, and the lead generation profit calculator shows what the resulting average price does to margin.

Unmet demand and what the next lead is worth

Unmet demand is the sum of caps minus leads allocated: 300 in the default example, all of it Buyer D's. It tells you the price of the marginal lead you could produce: the next 300 leads would sell to D at $40, not at the $56 average, because the higher-paying buyers are full. That is the figure to compare with your marginal cost of traffic in the break even CPC calculator. If producing another lead costs $45 and the only open buyer pays $40, more traffic loses money until you add a buyer or raise caps.

Conversely, when every buyer is at 100% fill and slots are left over, the next buyer you sign is worth the full price they pay on every lead you cannot currently place; that is the strongest position a lead generator can be in and the time to raise prices on renewal of existing contracts. Track fill rates monthly; a buyer consistently at 100% fill with a cap that never rises is a buyer whose cap is a negotiating position rather than a capacity.

For a sales manager distributing leads to reps instead of buyers, the same mechanics apply with price replaced by expected revenue per lead for that rep, which is the rep's funding rate times commission. Weighting toward reps with higher funding rates raises floor revenue; capping each rep at what they can call within the hour protects contact rates, which the lead response time calculator quantifies.

Compliance constraints on who can receive which lead

Distribution is also where consent and licensing are enforced. Under the FCC's rules implementing the Telephone Consumer Protection Act, 47 CFR 64.1200, a buyer that autodials or texts a mobile number needs the called party's prior express written consent, and the FCC has moved to require that consent name each seller individually. If your consent form names four buyers, a fifth buyer added to the rotation cannot lawfully autodial those leads, and if the form names a long list of partners its validity has been questioned. The practical rule is that maximum buyers per lead cannot exceed the number of sellers the consent language supports, and a buyer's weight must be zero for leads whose consent does not name it.

State licensing works the same way through filters. California requires brokers of commercial loans to hold a California Financing Law license; Virginia requires providers and brokers of sales-based financing to register with the State Corporation Commission; Utah requires commercial financing providers to register with the Department of Financial Institutions. A buyer not licensed or registered where required should have those states excluded from its filter, which lowers the leads it can accept and should be reflected in a lower cap or weight. Buyers also operate under the FTC's Telemarketing Sales Rule where consumers are called, and sellers who knowingly supply leads to a buyer violating it can be liable for assisting.

Lead files contain non-public personal information about business owners, and the FTC's Safeguards Rule applies to finders that bring borrowers and lenders together; delivering leads through encrypted channels, with access limited to the buyers named in the consent, is part of distribution design rather than an afterthought.

Input mistakes and how the tool reacts to them

  • Lines with fewer than four comma-separated values are ignored silently. Check the table for missing buyers.
  • Non-numeric caps, weights or prices become zero. A zero weight never receives leads; a zero cap is always full.
  • Entering a share (such as 40) as a weight. Weights are relative, so 40, 30, 20, 10 behaves like 4, 3, 2, 1, but mixing shares and small integers across lines distorts priorities.
  • Setting caps above what buyers actually pay for. Caps should be contractual maximums, not aspirations.
  • Using exclusive prices with maximum buyers per lead above 1. Shared prices are lower; see the lead pricing calculator.
  • Forgetting returns. Allocated leads are deliveries; revenue after returns is lower by your return rate.

A sanity check: the sum of the allocated column must equal the smaller of total slots and total caps, and revenue must equal the sum of allocated times price per line. If a buyer with a high weight shows a low fill, its cap was reached in an early pass and the remaining slots went elsewhere, which is expected; if a buyer with a high weight and spare cap shows a low fill, a line was probably parsed as zero weight.

Planning next month's distribution

  1. 1

    Enter real caps from insertion orders

    And prices net of volume discounts. Run the tool at expected volume and at 70% of it.

  2. 2

    Read unmet demand and fill

    If unmet demand is large and concentrated in your best-paying buyers, buy more traffic. If it is concentrated in the lowest payer, do not.

  3. 3

    Fix concentration

    If one buyer exceeds about 40% of revenue, recruit a buyer with a complementary filter (different states or revenue band) so that both can be filled from the same leads.

  4. 4

    Decide on sharing with prices, not slots

    Run example 2 with shared prices. Sharing beats exclusivity only if total revenue per lead rises after the price cut and buyers' funding rates stay acceptable; the funding conversion rate calculator is what your buyers will use to check.

The lead generation revenue forecast takes the average price realized from this tool as its revenue per sold lead and projects twelve months forward, which is the natural next step once the distribution plan is set.

Questions people ask

How does the lead distribution calculator split leads between buyers?

By weighted round-robin with caps. In each pass, every buyer below its cap receives a share of the remaining slots proportional to its weight, rounded down and limited by its cap; buyers that fill drop out and the next pass shares what is left. With 1,500 leads and the default buyers, the result is 600, 400, 300 and 200.

What do cap and weight mean?

Cap is the most leads a buyer will take in the month, usually from the insertion order. Weight is a priority: a buyer with weight 3 claims three times as many slots per pass as one with weight 1 until a cap binds. Weights are relative, so 3, 2, 2, 1 and 30, 20, 20, 10 give the same allocation.

Why does one buyer have a low fill rate?

Because higher-weight buyers took most slots before the lowest-weight buyer's turn, and volume ran out. In the default example Buyer D has weight 1 and ends at 40% fill. Raise D's weight, raise volume or lower other caps if D's contract requires a minimum.

What does maximum buyers per lead do?

It multiplies volume into slots: 1,500 leads with two buyers per lead is 3,000 slots to allocate. Revenue rises if there is spare buyer demand, but shared leads are priced lower than exclusive ones, so enter shared prices before trusting the revenue figure.

Can I use this to distribute leads to sales reps?

Yes. Enter each rep's name, the number of leads they can work in the month, a weight based on their funding rate and expected revenue per lead as the price. The allocation then favours productive reps while respecting what each can call promptly.

Sources and further reading

Related tools and guides

More lead gen

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Turn the estimate into real offers

One request, several funding partners, side-by-side payback. Nothing is binding until you accept an offer.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

See what you may qualify for

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.