Skip to content
Alternative Finance

Calculator

Revenue-based financing calculator

Divide total payback (advance × cap) by the monthly remittance (revenue × share) to get months to repay. $100,000 at a 1.3× cap with 8% of $150,000 monthly revenue repays in about 11 months at an implied APR near 60%. Faster growth shortens the term and raises the APR.

Months to repay
10.8
Total payback
$130,000
Monthly remittance
$12,000
Approximate APR
56.6%
If revenue grows, you repay faster and the APR rises because the cap is fixed. If revenue falls, payments fall and the APR drops, which is the product's real advantage.

How to use it

  1. Enter the advance, cap and revenue share from the offer.
  2. Enter current monthly revenue.
  3. Test higher and lower revenue to see the APR move.

What the calculator does

  • Payback = advance × cap
  • Monthly remittance = revenue × share
  • Months = payback ÷ remittance; APR = IRR of the monthly stream

Limits of the estimate

  • Remittances are often daily from platform payouts; the monthly model is an approximation.
  • Some providers charge platform fees on top of the cap.

The cap, the share and the term you do not control

Revenue-based financing fixes two numbers and leaves the third to your sales. The cap (often written as a multiple like 1.3× or as a 'repayment amount') sets total payback. The share (a percentage of monthly or daily revenue) sets how fast you pay. The term is whatever those two produce. This is the same economics as a merchant cash advance with a true split; the differences are usually in who offers it (platforms serving e-commerce and software companies), how remittance is collected (from payment-processor or marketplace payouts rather than a card processor) and the size of the share, which is often lower than an MCA holdback.

Because the term floats, the APR floats with it. Growth shortens the term and raises the annualized cost; a slow quarter lengthens the term and lowers it. The provider is betting on your growth and gets paid more per year when the bet pays off. The calculator's APR is therefore a point estimate at your current revenue. Run it at least three times: current revenue, 30% higher and 30% lower.

Worked example one: steady revenue

An online retailer in Colorado with $120,000 of monthly revenue takes $80,000 at a 1.35× cap with a 7% revenue share.

  1. Payback = $80,000 × 1.35 = $108,000.
  2. Monthly remittance = $120,000 × 7% = $8,400.
  3. Months to repay = $108,000 ÷ $8,400 ≈ 12.9 months.
  4. Dollar cost = $108,000 − $80,000 = $28,000.
  5. Implied APR: the monthly rate equating 12.86 payments of $8,400 with $80,000 is about 4.6%, so roughly 56% APR.

A simple cross-check: cost ÷ advance ÷ years = $28,000 ÷ $80,000 ÷ 1.07 ≈ 33%. The true rate is higher because you are paying the money back steadily rather than at the end, so the average balance you hold is only about half the advance. Whenever a provider quotes a 'simple' cost percentage, expect the internal rate of return to be roughly 1.6 to 1.9 times that figure on a level repayment stream.

Worked example two: growth and decline

Same $80,000 at 1.35× and 7%, three revenue paths
Revenue pathRemittanceMonths to repayApproximate APR
Flat at $120,000$8,40012.9about 56%
$120,000 for 6 months, then $160,000$8,400 then $11,20011.1about 59%
Falls to $90,000 from month one$6,30017.1about 42%

The dollar cost is $28,000 in every row. In the growth case, the business pays $11,200 a month in its best months, which is the point at which it needs inventory most; this is the central operating problem with revenue shares in product businesses. In the decline case, the lower APR is cold comfort, because the business is paying $6,300 a month out of shrinking revenue for a year and a half. Model the remittance in dollars against your inventory purchase cycle, not just the APR.

A platform fee changes the arithmetic too. If the provider charges a 2% platform or origination fee, net funds fall to $78,400 while payback stays $108,000, lifting the flat-revenue APR by several points. Enter such fees by reducing the advance in the factor rate calculator, which handles fees explicitly.

How providers size and price

Providers connect directly to your sales channels, payment processor and bank through data links and underwrite on trailing revenue, growth rate, gross margin, customer concentration and, for subscription businesses, churn and recurring revenue. The advance is usually sized as a multiple of monthly revenue, with the share set so that the expected term lands in a window the provider wants, commonly six to eighteen months. Higher-margin, faster-growing businesses get a lower cap. A business with thin margins is often offered a smaller amount at the same cap, because the provider models what share of revenue the business can actually surrender.

Securities laws generally do not apply because the provider is purchasing a share of revenue rather than issuing a security, and consumer lending laws do not apply because the borrower is a business. The commercial financing disclosure laws in states such as California (DFPI) and New York (DFS) do cover sales-based financing offered to businesses in those states and require an estimated APR and term on the disclosure. The CFPB's section 1071 rule will, as it phases in, require covered lenders to report small-business lending data, which may eventually improve public visibility into pricing.

Input errors and how to avoid them

  • Using gross merchandise value instead of net revenue. Marketplace sellers often see the share applied to payouts after platform fees and refunds; check the definition of revenue in the agreement.
  • Entering the cap as a percentage. A '35% fee' is a 1.35× cap; entering 35 as the cap produces nonsense.
  • Averaging a seasonal year into one monthly figure. A holiday-driven retailer repays most of the advance in two months, which shortens the term and raises the true APR well above the flat-revenue estimate.
  • Ignoring other revenue-share or advance obligations already in place. Two 7% shares are a 14% share; the stress test adds them up.
  • Forgetting that remittances are often collected daily from payouts even when quoted monthly. Daily collection shortens the effective term slightly and raises the APR a little.

When revenue-based financing is the right tool

  1. 1

    Inventory with a known sell-through

    If $80,000 of stock turns into $140,000 of revenue inside the repayment window at a 40% margin, the $28,000 cost is covered; the ROI calculator shows the margin of safety.

  2. 2

    Paid marketing with measured payback

    If you know the cost to acquire a customer and the gross profit per customer, you can compute whether the campaign funded by the advance returns more than the cap.

  3. 3

    Bridging to a priced round or a bank line

    A short, expensive bridge is acceptable when the cheaper capital is documented and dated, not hoped for.

  4. 4

    Not for covering losses

    A revenue share on a shrinking business lengthens the term and extracts cash exactly when it is scarcest; the cash runway calculator tells you which situation you are in.

Compare against invoice factoring if you sell to businesses, a line of credit if you have twelve months of history, and an SBA loan if you can wait several weeks. The revenue-based financing page describes typical qualification, and the Fed's Small Business Credit Survey tracks how firms that used online financing rate their experience against bank borrowers.

Funding options covered in detail

Remittance mechanics and the covenants around them

Providers collect in one of three ways. A processor split diverts the agreed share of each payout from your payment processor or marketplace before it reaches your account. A bank debit pulls a fixed amount, recalculated monthly from revenue you report or from data the provider reads directly through a bank connection. A platform-integrated remittance for software businesses takes the share from subscription billing. Each method comes with covenants: you must keep the connected accounts open, must not change processors without consent, must report revenue accurately, and must allow the provider to audit. Breaching any of these is usually an event of default that accelerates the full cap, even if every remittance was made.

Two clauses deserve a careful read. A minimum monthly remittance or a maximum term converts the revenue share into a loan-like obligation during a downturn. A change of control clause makes the full cap due if you sell the business or take outside investment above a threshold, which can surprise a founder raising a priced round. Ask for both in writing before signing, and model the maximum-term case in the stress test as a fixed monthly debit.

Questions people ask

Is revenue-based financing cheaper than a merchant cash advance?

Often, but not always. Caps are frequently lower (1.1× to 1.4× is commonly seen) and shares are smaller, but the term can be longer, which lowers the APR without lowering the dollar cost. Convert both offers with the loan comparison calculator and compare APR, dollar cost and monthly remittance in dollars side by side.

What if my revenue drops to zero for a month?

Under a true revenue share you remit nothing that month and the term extends. Some agreements include a minimum monthly payment or a maximum term after which the balance becomes due; either clause converts the deal into something closer to a loan. Read for both before signing.

Does early repayment reduce the cost?

Not unless the contract provides a prepayment discount. The cap is a fixed dollar amount. Fast growth that repays the advance in six months instead of twelve roughly doubles the annualized cost with no change in dollars paid.

Will this affect my credit?

Most providers do not report to commercial credit bureaus and underwrite on revenue data rather than credit scores, though they usually run a soft pull. A default, however, can lead to a UCC filing and collection action, which other lenders will see.

Sources and further reading

Related calculators

Funding options this applies to

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Ready to compare real offers?

Run your numbers, then request quotes. Partners see your request, you compare total payback with the calculators above, and nothing is binding until you sign.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

See what you may qualify for

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.