Skip to content
Alternative Finance

Underwriting · Lenders and funders

Risk based pricing calculator for business loans and advances

This risk based pricing calculator assembles the annual rate a loan must earn on its outstanding balance from four components, cost of funds, expected loss as PD times LGD, operating cost and a capital charge equal to capital held times the target return on it, then converts that rate to a factor rate for the term by applying it to an average outstanding balance of 55 percent of the amount and adding the commission paid. It is for funders and lenders setting prices by tier. Watch the expected loss line: it is the only component that changes from file to file, and it is the one most often guessed.

Required annual rate on outstanding balance
20.4%
Cost of funds
9.00%
Expected loss premium
4.40%
Operating cost
4.00%
Capital charge
3.00%
Equivalent factor rate for the term
1.164
Cost per dollar advanced
$0.164

Rate = cost of funds + PD × LGD + operating cost + capital × target return. Converting to a factor assumes the average balance over an amortizing term is about 55 percent of the amount.

Rate build-up
  • Funds9%
  • Loss4.4%
  • Opex4%
  • Capital3%

Formula

Expected loss premium = Probability of default × Loss given default. Capital charge = Capital held against the loan × Target return on that capital.

Required annual rate on outstanding balance = Cost of funds + Expected loss premium + Origination and servicing cost + Capital charge.

Cost per dollar advanced = Required annual rate × (Term in months ÷ 12) × 0.55 + Commission paid, where 0.55 is the assumed average outstanding balance as a share of the amount over an amortizing term.

Equivalent factor rate for the term = 1 + Cost per dollar advanced.

Worked examples

Example 1: default inputs, a nine-month advance at a 20.4% annual rate

Inputs: Cost of funds 9%, Probability of default 8%, Loss given default 55%, Origination and servicing cost 4%, Capital held 15%, Target return on that capital 20%, Term 9 months, Commission paid 8%. Expected loss premium = 0.08 × 0.55 = 4.40%. Capital charge = 0.15 × 0.20 = 3.00%. Required annual rate = 9.00 + 4.40 + 4.00 + 3.00 = 20.4% on the outstanding balance. The bars chart shows the build-up with the loss premium highlighted. Converting to a factor: the term is 9 ÷ 12 = 0.75 years; the average balance over an amortizing term is taken as 55 percent of the amount; so interest-equivalent cost = 0.204 × 0.75 × 0.55 = 0.08415 per dollar. Add the 8 percent commission, which is paid on the full amount at funding: 0.08415 + 0.08 = 0.16415, shown as $0.164 cost per dollar advanced. Equivalent factor rate = 1.164. On a $100,000 advance the merchant would repay about $116,400, of which $8,000 went to the broker at closing and $8,400 covers funding, expected loss, operations and the return on capital over nine months.

Example 2: a prime three-year loan

Inputs: cost of funds 6%, PD 3%, LGD 45%, operating cost 2%, capital 10%, target return 15%, term 36 months, commission 2%. Expected loss premium = 0.03 × 0.45 = 1.35%. Capital charge = 0.10 × 0.15 = 1.50%. Required annual rate = 6.00 + 1.35 + 2.00 + 1.50 = 10.85%, shown as 10.8%. Term = 3 years; cost per dollar = 0.1085 × 3 × 0.55 + 0.02 = 0.179 + 0.02 = 0.199; factor = 1.199. The annual rate is half the default example's, but the factor is higher, because the money is out four times as long. That is the relationship brokers and borrowers most often misread: a 1.199 factor over three years is a far cheaper loan than a 1.164 factor over nine months, as the factor rate to APR converter will confirm. The components also show where a bank's advantage lies: lower cost of funds, lower expected loss and lower operating cost per dollar each contribute, and the capital charge is small because the capital held is small and the target return modest.

Example 3: a high-risk six-month advance

Inputs: cost of funds 12%, PD 15%, LGD 65%, operating cost 6%, capital 25%, target return 25%, term 6 months, commission 10%. Expected loss premium = 0.15 × 0.65 = 9.75%. Capital charge = 0.25 × 0.25 = 6.25%. Required annual rate = 12.00 + 9.75 + 6.00 + 6.25 = 34.0%. Term = 0.5 years; cost per dollar = 0.34 × 0.5 × 0.55 + 0.10 = 0.0935 + 0.10 = 0.1935, shown as $0.194; factor = 1.194. Note that the factor is close to the default example's 1.164 and below the prime loan's 1.199, despite an annual rate of 34 percent, because the term is short. Half the cost per dollar is the broker's commission. A funder who prices this file at a market factor of 1.30 is earning well above the required rate; one who prices it at 1.15 to win the deal is lending below cost of funds plus expected loss, and will discover it when the 15 percent default rate arrives. The loss premium of 9.75 percent is the figure to defend: it assumes 15 percent of such files default and 65 percent of a defaulted balance is lost, both of which should come from the book.

The four components of a risk-based price

Every lending price, whether expressed as an interest rate, a factor or a fee, must cover the same four things: the cost of the money, the losses expected on files like this one, the cost of originating and servicing the loan, and a return to the equity that absorbs unexpected losses. A risk based pricing calculator makes each explicit so that a price can be defended component by component. Cost of funds is the blended rate on the warehouse line, notes or investor capital that funds the book; the Federal Reserve's H.15 release gives the benchmark rates that most warehouse facilities are priced over. Expected loss is the probability of default times loss given default, the same product that drives reserves in the loan loss reserve calculator. Operating cost is origination, underwriting, servicing and collections expressed as an annual share of balance. The capital charge is the share of each loan funded by equity times the return that equity requires.

Only the expected loss component varies by file; the other three are properties of the funder. That is what makes risk-based pricing coherent: two files at the same funder differ in price exactly by the difference in their expected loss, and the price difference between tiers is explainable as PD and LGD. A file with an 8 percent PD and 55 percent LGD carries a 4.4 percent annual loss premium; a file at 15 percent and 65 percent carries 9.75 percent. The probability of default calculator supplies the PD by file, and the loan recovery rate calculator supplies the LGD by product.

Where each component comes from
ComponentSourceTypical range by funder type
Cost of fundsBlended rate on debt and investor capitalBanks low single digits; alternative funders high single digits to mid-teens
Expected loss premiumPD × LGD from the bookPrime loans around 1 to 2 percent; short-term unsecured advances often 5 to 15 percent
Operating costAnnual origination, servicing and collections cost ÷ average balanceLower for large loans and long terms; higher for small, short products
Capital chargeEquity share × target returnBanks hold less capital per loan at lower target returns; funders hold more at higher

From an annual rate to a factor rate

The annual rate applies to the balance outstanding, but a factor rate is quoted on the amount funded. Converting between them requires knowing how much of the amount is outstanding on average over the term. For a level-payment amortizing loan the average balance is a little over half the original principal; for a daily-debit advance with a fixed payback it is close to half. The tool uses 55 percent, which is a reasonable approximation for both. Interest-equivalent cost per dollar is therefore the annual rate times the term in years times 0.55. Commission is added separately because it is paid on the full amount at funding, not on the average balance, and is recovered from the merchant through the factor.

The result is why short-term products carry high annual rates and modest factors at the same time. A 20.4 percent annual rate over nine months produces an 8.4 cent interest-equivalent cost per dollar; the commission adds 8 cents; the factor is 1.164. Quoted the other way, a market factor of 1.30 over nine months with an 8 percent commission implies an interest-equivalent cost of 22 cents per dollar, which is 0.22 ÷ 0.75 ÷ 0.55 = 53 percent on the outstanding balance, more than double the required rate in the default example. The gap between the required factor and the market factor is the funder's margin above target, or the premium for risks the model has not captured. The factor rate versus APR guide explains the borrower-facing version of this arithmetic.

Setting the capital charge and target return

Capital held against the loan is the share of each dollar lent that is funded by the funder's own equity rather than borrowed money; it is the buffer that absorbs losses beyond those expected. A funder with a warehouse line advancing 80 percent of eligible receivables holds 20 percent capital on those loans. The target return is what that equity requires, which for alternative lenders is usually well above bank returns because the risk is higher and the capital less liquid. Multiplying the two gives the annual charge per dollar of loan: 15 percent capital at 20 percent is 3 percent, while 25 percent capital at 25 percent is 6.25 percent. Banks hold capital under regulatory rules, which the Federal Reserve's supervision pages describe, and the logic transfers directly to non-banks that must satisfy their own investors.

The capital charge is also where riskier tiers should be charged more, not just through expected loss. Unexpected loss, the variability around the expected rate, is larger for high-PD files, so a prudent funder holds more capital against them. The tool takes one capital figure per run; price tiers separately with higher capital for weaker tiers. The loan portfolio yield calculator shows the resulting return on equity for a book funded at a given debt share, which is the figure investors will compare with the target return entered here.

Commission, brokers and the price the merchant sees

Commission is often the single largest cost in a short-term advance, as the third example shows, and it is paid on volume rather than on balance or outcome, which is why it appears outside the annual rate. A funder paying 8 to 12 points on funded volume to brokers must recover it in the factor, and the guide to how brokers get paid explains the buy-rate and sell-rate mechanics through which that happens; the buy rate versus sell rate calculator shows how much of the factor the merchant pays is the broker's upsell above the funder's required price. Direct origination removes the commission line but raises the operating cost line through marketing, and the lead generation tools measure that trade-off.

The price the merchant sees is subject to disclosure rules in a growing number of states. California, New York, Utah, Virginia, Georgia, Florida, Connecticut and Kansas require commercial financing providers to disclose cost metrics such as total dollar cost, and in some states an annualized rate, before the merchant signs; the California DFPI and New York DFS publish their regulations. Federal consumer disclosure under Regulation Z does not apply to business-purpose credit, but Regulation B's fair-lending rules do, and the CFPB's Section 1071 rule will require covered lenders to report pricing on small-business applications. A documented component build-up by tier is the strongest evidence that pricing differences are risk-based rather than arbitrary.

Using the required rate in practice

The required rate is a floor, not a quote. Price above it and the margin is the reward for risk the model does not see, for the funder's speed and service, and for the competitive position of the file; price below it and the funder is subsidising the merchant with its own capital. The useful discipline is to run the calculator for each tier with that tier's PD and LGD and record the required factor beside the market factor the tier actually commands. Tiers where the market factor sits well above the required one are profitable and can absorb competition; tiers where the two are close are the ones a rise in defaults will turn loss-making first.

  1. Measure PD and LGD by tier from the book, and refresh them quarterly.
  2. Compute cost of funds as the blended rate on all funding including undrawn commitment fees.
  3. Allocate operating cost by product, recognising that small short-term deals cost more per dollar.
  4. Set capital and target return by tier, higher for weaker tiers.
  5. Run the required factor per tier and compare it with the sell rates actually achieved; the MCA deal profitability calculator checks the result deal by deal.

A merchant who sees the build-up often understands the price better than one who sees only the factor. Showing that a 1.30 factor over nine months is made of funding cost, a loss premium that reflects files like theirs, operating cost, commission and a return on capital is not required by any rule, but it answers the question every borrower asks, and it is the same answer the business loan APR calculator gives from the other direction.

Questions people ask

How is a risk-based interest rate calculated?

By adding four components: the lender's cost of funds, the expected loss on the file as probability of default times loss given default, the annual cost of originating and servicing the loan, and a capital charge equal to the equity held against the loan times the return that equity requires. The risk based pricing calculator sums these into a required annual rate on the outstanding balance and converts it to a factor for the term.

Why does a higher annual rate not always mean a higher factor rate?

Because the factor is quoted on the amount funded for the whole term, while the annual rate applies to the balance outstanding over time. A 34 percent annual rate over six months on a balance that averages 55 percent of the amount costs about 9 cents per dollar before commission; a 10.85 percent rate over three years costs about 18 cents. Short terms produce modest factors from high rates.

What is the 55 percent average balance assumption?

An approximation of how much of the original amount is outstanding on average over an amortizing term. For level-payment loans and fixed-payback daily advances the figure is a little over half. It converts the annual rate on balance into a cost on the amount funded. If your product is interest-only or bullet, the average balance is 100 percent and the factor from this tool understates the required price.

Should commission be included in the rate?

It is included in the cost per dollar and the factor but not in the annual rate, because it is paid on the funded amount at closing rather than accruing on the balance. Treating it separately shows how much of the factor the broker's commission represents, which in short-term advances is often the largest single component.

Is risk-based pricing legal for business loans?

Yes, provided the differences are based on risk and applied consistently. Regulation B's fair-lending requirements apply to business credit, and a documented component build-up by tier is the clearest evidence that price differences reflect expected loss rather than prohibited factors. Several states also require commercial financing cost disclosures, and the CFPB's Section 1071 rule will require covered lenders to report pricing data.

Sources and further reading

Related tools and guides

More underwriting

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Turn the estimate into real offers

One request, several funding partners, side-by-side payback. Nothing is binding until you accept an offer.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

See what you may qualify for

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.