Skip to content
Alternative Finance

Calculator

Invoice factoring cost calculator

On a $100,000 invoice at an 85% advance and 2% per 30 days, paid in 45 days, you receive $85,000 now, pay $3,000 in fees and get $12,000 when the customer pays. The effective APR on the advance is about 28%.

Cash advanced now
$85,000
Factoring fee
$3,000.00
Reserve paid after collection
$12,000.00
Effective APR on the advance
28.6%
The fee is charged on the full invoice but you only received the advance, which is why the APR is higher than the fee suggests. Slow-paying customers raise the cost; ask whether the fee is prorated by day or stepped every 30 days.

How to use it

  1. Enter the invoice amount and advance rate.
  2. Enter the fee per 30 days and the expected days to payment.
  3. Read the advance, fee, reserve and APR.

What the calculator does

  • Advance = invoice × advance rate
  • Fee = invoice × fee rate × (days ÷ 30)
  • APR = fee ÷ advance ÷ (days ÷ 365)

Limits of the estimate

  • Stepped fees (charged every 30 days) cost more than prorated daily fees; confirm which applies.
  • Recourse factoring may charge back unpaid invoices.

What the fee is actually buying

A factor advances cash against an invoice, collects from your customer, keeps its fee and returns the rest. The fee compensates three things: the time value of the advance, the credit risk that your customer does not pay, and the collection work. Because the fee is quoted as a percentage of the invoice face, not of the advance, the effective rate on the money you actually received is higher than it looks. On an 80% advance, a 1.5% fee on the face is a 1.875% fee on the cash in hand. The calculator divides fee by advance for exactly that reason.

The two fee styles matter more than the headline rate. A prorated fee accrues daily (1.5% per 30 days means 0.05% a day). A stepped or tiered fee charges a block for the first period and further blocks for each additional period or part of one; an invoice paid on day 31 can cost the same as one paid on day 60. Recourse versus non-recourse also moves the price: under recourse you must buy back or replace an invoice the customer fails to pay, so the factor charges less; under non-recourse the factor absorbs the customer's insolvency (but usually not disputes) and charges more.

Worked example one: prorated fee, 60-day customer

A staffing agency in Illinois factors a $40,000 invoice to a hospital system that pays in 60 days. Terms: 80% advance, 1.5% per 30 days prorated, recourse.

  1. Advance = $40,000 × 80% = $32,000 wired within a day or two of verification.
  2. Fee = $40,000 × 1.5% × (60 ÷ 30) = $1,200.
  3. Reserve released on collection = $40,000 − $32,000 − $1,200 = $6,800.
  4. Total received = $32,000 + $6,800 = $38,800, or 97% of the invoice.
  5. Effective APR on the advance = $1,200 ÷ $32,000 ÷ (60 ÷ 365) ≈ 22.8%. Computed on the invoice face instead it would show 18.25%, which is why some factors quote it that way.

A useful property of a flat per-30-day fee: the APR does not change with the collection period. Paid on day 30 the fee is $600 and the APR is still 22.8%; paid on day 90 it is $1,800 at the same APR. What changes is the dollar cost and your margin on the job. If the agency's gross margin on the placement is 20%, the $1,200 fee consumed 15% of the $8,000 gross profit.

Worked example two: stepped fee on the same invoice

Same $40,000 invoice and 80% advance, but the agreement charges 2% for the first 30 days and 1% for each additional 10 days or part thereof. The customer pays on day 52.

  1. Days beyond 30 = 22, which spans three 10-day blocks (days 31–40, 41–50, 51–60).
  2. Fee = 2% + 3 × 1% = 5% of face = $2,000.
  3. A prorated 2% per 30 days over the same 52 days would be 2% × 52 ÷ 30 = 3.47% = $1,387.
  4. Effective APR, stepped: $2,000 ÷ $32,000 ÷ (52 ÷ 365) ≈ 44%. Prorated: ≈ 30%.
  5. Had the customer paid on day 50 instead of 52, the stepped fee would have been $1,600. Two days cost $400.

How factors underwrite, and why it is not about you

Factoring is underwritten on the account debtor, the customer who owes the invoice. The factor checks the debtor's payment history, pulls commercial credit, and sets a concentration limit so that no single debtor is too large a share of the pool. Government and large-corporate debtors get the best terms; the SAM.gov registration and USAspending records make federal receivables easy to verify. Your own credit matters far less, which is why factoring is available to businesses that cannot get a line of credit.

The factor also perfects its position with a UCC-1 filing against your receivables and sends a notice of assignment instructing the debtor to pay the factor directly. If another lender already has a blanket lien on receivables, the factor will require a subordination or will decline. Check your state's UCC search before applying; the Secretary of State sites, such as the Texas Secretary of State, publish filings. An unexpected lien from an old advance is the most common reason a factoring deal stalls.

Typical features by factoring structure
FeatureRecourseNon-recourse
Who bears customer insolvencyYouFactor (insolvency only; disputes usually excluded)
Fee levelLowerHigher
ChargebackUnpaid invoice charged back after a set period, often 90 daysLimited to disputed or ineligible invoices
Debtor quality requiredModerateHigh; factor is insuring the credit

Hidden costs the calculator cannot see

  • Minimum volume fees: many agreements require a minimum monthly or annual factored volume and charge the fee on the shortfall.
  • Termination fees and notice periods: a 12-month term with 60 days' notice is common; leaving early costs the minimum fees for the remaining term.
  • Wire, ACH, lockbox, credit check and invoice processing fees, each small, each per invoice.
  • Float days: a factor that credits your collections two or three days after receipt extends the fee clock by those days.
  • Rebate timing: the reserve may be released weekly or monthly rather than on each collection, which delays cash you are counting on.
  • Interest on the advance in addition to the fee: some agreements charge both a discount fee and prime-plus interest on funds employed. Enter the interest as an additional fee per 30 days.

Deciding whether to factor

  1. 1

    Compute the fee as a share of gross margin

    If the fee eats more than a quarter of the margin on the job, the pricing to your customer is the problem, not the financing.

  2. 2

    Compare with offering an early-pay discount

    A 2% discount for payment in 10 days (2/10 net 30) is cheaper than most factoring on invoices under 30 days and keeps the customer relationship direct.

  3. 3

    Compare with a receivables-backed line

    If you have twelve months of history and clean books, a bank line against the same invoices costs far less; see the line of credit cost calculator.

  4. 4

    Test the cash impact

    Run the working capital calculator with the advance added to cash and the reserve kept in receivables; the current ratio should improve, not just move.

  5. 5

    Read the contract for notification, recourse and termination

    The invoice factoring page explains spot factoring versus whole-ledger contracts, and the factoring versus MCA comparison covers when an advance on card sales is the only alternative.

For benchmarks on how long customers in your industry take to pay, the Census Bureau's Quarterly Financial Report publishes receivables and sales figures for manufacturing, mining, wholesale and retail corporations, from which days-sales-outstanding can be derived; payment speed varies widely by industry, and construction and healthcare receivables commonly run longest.

Questions people ask

Why is the APR on the advance higher than the fee percentage suggests?

Because the fee is charged on the full invoice while you only received the advance portion, and because 30 days is one-twelfth of a year. A 1.5% per-30-day fee on the face is 1.875% on an 80% advance, times roughly 12 periods, which is about 22.5% before adjusting for the exact day count.

What happens if my customer never pays?

Under recourse factoring you must repay the advance or substitute another invoice after the chargeback period, often 90 days. Under non-recourse the factor absorbs the loss only if the customer is insolvent; a customer that disputes the invoice or short-pays is still your problem. Read the definition of a credit loss in the agreement.

Does factoring show up as debt on my balance sheet?

A true sale of receivables with non-recourse removes the invoices from your books and adds cash; recourse arrangements are often treated as secured borrowing under accounting rules. The treatment affects your current ratio and what other lenders see. Ask your accountant how the specific contract should be recorded.

Will my customers know?

Yes, in conventional factoring. The notice of assignment tells them to remit to the factor. Some factors offer non-notification programs for strong debtors at a higher fee. Large customers and government agencies process assignments routinely; the federal Assignment of Claims Act even prescribes the procedure for government contracts.

Can I factor only some invoices?

Spot factoring lets you select invoices one at a time at a higher fee. Whole-ledger agreements require you to factor all invoices from approved debtors and usually have minimum volumes. If you only need cash occasionally, spot factoring's higher rate is often cheaper overall than a minimum-volume contract.

Sources and further reading

Related calculators

Funding options this applies to

Updated October 12, 2026 · By Alternative Finance editorial team

Next step

Ready to compare real offers?

Run your numbers, then request quotes. Partners see your request, you compare total payback with the calculators above, and nothing is binding until you sign.

  • Soft inquiry to request offers; a hard pull only if you proceed with a funder.
  • Decisions in as little as 24 hours for many products; funding often within days.
  • Use our calculators to check the true cost before you accept anything.

See what you may qualify for

Takes about a minute. Requesting offers does not affect your credit score. Free, no obligation.

We are not a lender or broker. Requests are forwarded to funding partners free of charge. How the site is paid.